Breville EliteTemp VIN433 User manual
EliteTempTM Handheld
Garment Steamer
VIN433
®
®
32
1. Diamond ceramic press plate
2. Steam nozzle
3. Detachable water reservoir
4. «ON» (|) - «OFF» (O) button
5. Steam mode selection button
6. Steam mode indicator / Power
indicator / Pre-heating indicator /
Auto-off indicator / Descale indicator
7. Steam button
8. 3m power cord
9. Silicone band & Fabric brush
10. Travel bag (not shown)
Important Safety Information
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Keep the appliance and its cord out of reach of
children less than 8 years old when it is switched on or
cooling down.
The appliance must not be left unattended when it is
connected to the mains supply.
The appliance must be unplugged from the mains
supply socket before lling the water tank with water.
Always use the appliance on a stable, secure, dry and
level surface. When placing the appliance on its stand,
ensure that the surface on which the stand is placed is
stable.
Do not use the appliance if it has been dropped, if
there are any visible signs of damage or if it is leaking.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
Never use this appliance for anything other than its
intended use. This appliance is for household use
only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Do not touch the metal parts of the appliance during use as they may become very
hot.
!This appliance must not be placed on or near any potentially hot surfaces (such as
a gas or electric hob).
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
!Do not reach for an appliance that has fallen into water. Unplug immediately.
!Use only in a dry area.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Do not use an extension cord to operate the appliance.
!Never drop or insert any object into any opening.
!Do not place the steam nozzle directly on any surface or on the appliance power
cord while it is hot or plugged in.
!Always position the handheld garment steamer with the steam plate away from you
and others when turning on the appliance and emitting steam.
!Unplug this appliance before lling or emptying the water reservoir.
!It is recommended to ll this appliance with distilled water to prevent mineral
deposits in the boiler that can reduce performance or clog the water system.
!Use caution when installing or removing an attachment. It may contain hot water
from condensation. Ensure that the unit is «OFF» (O) and the attachment is dry or
cool to avoid contact with hot water.
!Never steam clothes you, or someone else, are wearing.
q
w
o
e
ry
u
i
t
Parts
LED indicators on your handheld garment
steamer
Your handheld garment steamer has LED indicators to alert you of the following states:
State LED Colour Indication
Pre-heating Blue Flashes every second 35 times and
illuminates solid when ready to use.
Auto-off Blue Breathes slowly on and off.
De-scale reminder Red Flashes every second.
Cleaning / drying mode Red Blinks quickly.
Steam mode Red Light(s) illuminates when steam
mode is selected.
32
1. Diamond ceramic press plate
2. Steam nozzle
3. Detachable water reservoir
4. «ON» (|) - «OFF» (O) button
5. Steam mode selection button
6. Steam mode indicator / Power
indicator / Pre-heating indicator /
Auto-off indicator / Descale indicator
7. Steam button
8. 3m power cord
9. Silicone band & Fabric brush
10. Travel bag (not shown)
Important Safety Information
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Keep the appliance and its cord out of reach of
children less than 8 years old when it is switched on or
cooling down.
The appliance must not be left unattended when it is
connected to the mains supply.
The appliance must be unplugged from the mains
supply socket before lling the water tank with water.
Always use the appliance on a stable, secure, dry and
level surface. When placing the appliance on its stand,
ensure that the surface on which the stand is placed is
stable.
Do not use the appliance if it has been dropped, if
there are any visible signs of damage or if it is leaking.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
Never use this appliance for anything other than its
intended use. This appliance is for household use
only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Do not touch the metal parts of the appliance during use as they may become very
hot.
!This appliance must not be placed on or near any potentially hot surfaces (such as
a gas or electric hob).
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
!Do not reach for an appliance that has fallen into water. Unplug immediately.
!Use only in a dry area.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Do not use an extension cord to operate the appliance.
!Never drop or insert any object into any opening.
!Do not place the steam nozzle directly on any surface or on the appliance power
cord while it is hot or plugged in.
!Always position the handheld garment steamer with the steam plate away from you
and others when turning on the appliance and emitting steam.
!Unplug this appliance before lling or emptying the water reservoir.
!It is recommended to ll this appliance with distilled water to prevent mineral
deposits in the boiler that can reduce performance or clog the water system.
!Use caution when installing or removing an attachment. It may contain hot water
from condensation. Ensure that the unit is «OFF» (O) and the attachment is dry or
cool to avoid contact with hot water.
!Never steam clothes you, or someone else, are wearing.
q
w
o
e
ry
u
i
t
Parts
LED indicators on your handheld garment
steamer
Your handheld garment steamer has LED indicators to alert you of the following states:
State LED Colour Indication
Pre-heating Blue Flashes every second 35 times and
illuminates solid when ready to use.
Auto-off Blue Breathes slowly on and off.
De-scale reminder Red Flashes every second.
Cleaning / drying mode Red Blinks quickly.
Steam mode Red Light(s) illuminates when steam
mode is selected.
54
Before using for the rst time
Warning: Remove all packaging including any press plate protection before using
your handheld garment steamer.
Before connecting your handheld garment steamer to the mains supply, make sure your
supply voltage is the same as the one indicated on your appliance.
When you rst use your handheld garment steamer, there may be a slight odour and it
may smoke slightly for the rst few minutes of operation. This is quite normal and will
disappear.
Priming your handheld garment steamer
before use
Follow these simple steps to remove any impurities or residues inside your handheld
garment steamer that may be left over from the manufacturing process.
1. Follow the instructions under ‘Filling instructions’ and ll the water reservoir as
described.
2. Empty the reservoir to rinse out any foreign particles then rell it.
3. Follow the instructions under ‘Operating instructions’ and select the ‘Low’ steam
setting.
4. Press the steam button once to release steam.
5. Steam an old piece of cloth (cotton or towelling is ideal) for a few minutes.
6. Any impurities will be ushed from your handheld garment steamer by the steam
and absorbed by the cloth. Your handheld garment steamer is now ready for use.
Filling instructions
Warning: Never add fabric conditioner, starches
or any other chemicals to the water in your handheld
garment steamer.
1. Make sure the unit is unplugged.
2. Stand the unit on a at, stable surface and grasp
the handle.
3. Pull the water reservoir out away from the
handheld garment steamer body.
4. The ll inlet is located on the top of the reservoir.
5. Remove the rubber inlet cover and ll the reservoir
to the max line – we recommend using distilled
water.
6. Close the inlet cover and wipe off any water on the
reservoir surface.
7. Return the reservoir to the handheld garment
steamer, making sure that it snaps securely into place.
Operating instructions
Warning: Never use steam on silks or synthetics.
Note: Before rst use or if the handheld garment steamer has not been used for a long
period of time, it will be necessary to prime the appliance. See ‘Cleaning your handheld
garment steamer before use’ for instructions.
1. Fill the water reservoir to the max line – we recommend using distilled water.
2. Plug the unit into the electrical mains outlet.
3. Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|).
4. The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
5. Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
Note: You may hear a tapping noise during the heat-up cycle. This is normal.
6. When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
7. This handheld garment steamer has 3 options for steam. To select a steam
setting press the +/- button to cycle through the modes.
a. One light will illuminate to indicate ‘Low’ mode for delicate fabrics or
freshening lightly wrinkled garments.
b. Two lights indicate ‘Normal’ mode for everyday cottons and polyester
fabrics with moderate wrinkles.
c. Three lights indicate ‘Turbo’ mode for thicker fabrics and heavily wrinkled
fabrics.
8. Position the steam nozzle away from you and others. Press the steam button
once to release continuous vertical and horizontal steam. Note: Once the steam
button is pressed this will lock into steam mode.
9. To stop the steam, press the steam button .
10. To switch off the handheld garment steamer, press and hold the «ON» (|) - «OFF»
(O) button for 2 seconds.
11. Unplug the device when not in use. Empty the reservoir and allow the handheld
garment steamer to cool down before storing.
Using the attachments
Your handheld garment steamer comes with a 2-in-1 silicone band and fabric brush.
i. The silicone band pulls fabrics taut for easier steaming.
ii. The fabric brush separates the bres on thicker fabrics for better steam
penetration.
Make sure the handheld garment steamer is unplugged and cool before
applying attachments. If the unit has been in use, allow the unit to cool down
completely rst before changing attachments as the press plate will still be hot.
1) To afx an attachment, snap the silicone band attachment over the press plate.
2) The silicone band must be afxed to use the brush attachment. This is inserted
into the slot on the top of the silicone band.
Note: Only one attachment can used at a time.
Auto shut off feature
Warning: ALWAYS disconnect your handheld garment steamer from the mains
supply socket after use. NEVER leave the appliance unattended with the auto shut off
function in operation.
An electronic safety device will automatically switch the heating element off when
the appliance has been powered on continuously for 15 minutes. To indicate that the
heating element has been switched off, the power indicator light will illuminate and
slowly breath on and off. To re-activate the handheld garment steamer:
1. Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|)
2. The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
3. Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
4. When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
Descaling instructions
Warning: Do not use harsh abrasives, chemical cleaners or solvents to descale of
your handheld garment steamer.
Warning: We advise you do this operation in a vented room.
After 5 hours of accumulative use, the steam mode indicator lights will ash to indicate
that the handheld steamer requires descaling. Descaling helps to removes scale and
impurities to prolong the life of your appliance. If the water in your area is very hard, the
descaling should be performed more frequently.
1) Remove the water reservoir.
2) Remove the rubber inlet cover.
3) Fill the reservoir to the max line – we recommend using distilled water.
4) Close the inlet cover and wipe off any water on the reservoir surface.
5) Return the reservoir to the handheld garment steamer, making sure that it snaps
securely into place.
6) Plug the unit into the electrical mains outlet.
7) Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|).
54
Before using for the rst time
Warning: Remove all packaging including any press plate protection before using
your handheld garment steamer.
Before connecting your handheld garment steamer to the mains supply, make sure your
supply voltage is the same as the one indicated on your appliance.
When you rst use your handheld garment steamer, there may be a slight odour and it
may smoke slightly for the rst few minutes of operation. This is quite normal and will
disappear.
Priming your handheld garment steamer
before use
Follow these simple steps to remove any impurities or residues inside your handheld
garment steamer that may be left over from the manufacturing process.
1. Follow the instructions under ‘Filling instructions’ and ll the water reservoir as
described.
2. Empty the reservoir to rinse out any foreign particles then rell it.
3. Follow the instructions under ‘Operating instructions’ and select the ‘Low’ steam
setting.
4. Press the steam button once to release steam.
5. Steam an old piece of cloth (cotton or towelling is ideal) for a few minutes.
6. Any impurities will be ushed from your handheld garment steamer by the steam
and absorbed by the cloth. Your handheld garment steamer is now ready for use.
Filling instructions
Warning: Never add fabric conditioner, starches
or any other chemicals to the water in your handheld
garment steamer.
1. Make sure the unit is unplugged.
2. Stand the unit on a at, stable surface and grasp
the handle.
3. Pull the water reservoir out away from the
handheld garment steamer body.
4. The ll inlet is located on the top of the reservoir.
5. Remove the rubber inlet cover and ll the reservoir
to the max line – we recommend using distilled
water.
6. Close the inlet cover and wipe off any water on the
reservoir surface.
7. Return the reservoir to the handheld garment
steamer, making sure that it snaps securely into place.
Operating instructions
Warning: Never use steam on silks or synthetics.
Note: Before rst use or if the handheld garment steamer has not been used for a long
period of time, it will be necessary to prime the appliance. See ‘Cleaning your handheld
garment steamer before use’ for instructions.
1. Fill the water reservoir to the max line – we recommend using distilled water.
2. Plug the unit into the electrical mains outlet.
3. Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|).
4. The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
5. Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
Note: You may hear a tapping noise during the heat-up cycle. This is normal.
6. When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
7. This handheld garment steamer has 3 options for steam. To select a steam
setting press the +/- button to cycle through the modes.
a. One light will illuminate to indicate ‘Low’ mode for delicate fabrics or
freshening lightly wrinkled garments.
b. Two lights indicate ‘Normal’ mode for everyday cottons and polyester
fabrics with moderate wrinkles.
c. Three lights indicate ‘Turbo’ mode for thicker fabrics and heavily wrinkled
fabrics.
8. Position the steam nozzle away from you and others. Press the steam button
once to release continuous vertical and horizontal steam. Note: Once the steam
button is pressed this will lock into steam mode.
9. To stop the steam, press the steam button .
10. To switch off the handheld garment steamer, press and hold the «ON» (|) - «OFF»
(O) button for 2 seconds.
11. Unplug the device when not in use. Empty the reservoir and allow the handheld
garment steamer to cool down before storing.
Using the attachments
Your handheld garment steamer comes with a 2-in-1 silicone band and fabric brush.
i. The silicone band pulls fabrics taut for easier steaming.
ii. The fabric brush separates the bres on thicker fabrics for better steam
penetration.
Make sure the handheld garment steamer is unplugged and cool before
applying attachments. If the unit has been in use, allow the unit to cool down
completely rst before changing attachments as the press plate will still be hot.
1) To afx an attachment, snap the silicone band attachment over the press plate.
2) The silicone band must be afxed to use the brush attachment. This is inserted
into the slot on the top of the silicone band.
Note: Only one attachment can used at a time.
Auto shut off feature
Warning: ALWAYS disconnect your handheld garment steamer from the mains
supply socket after use. NEVER leave the appliance unattended with the auto shut off
function in operation.
An electronic safety device will automatically switch the heating element off when
the appliance has been powered on continuously for 15 minutes. To indicate that the
heating element has been switched off, the power indicator light will illuminate and
slowly breath on and off. To re-activate the handheld garment steamer:
1. Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|)
2. The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
3. Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
4. When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
Descaling instructions
Warning: Do not use harsh abrasives, chemical cleaners or solvents to descale of
your handheld garment steamer.
Warning: We advise you do this operation in a vented room.
After 5 hours of accumulative use, the steam mode indicator lights will ash to indicate
that the handheld steamer requires descaling. Descaling helps to removes scale and
impurities to prolong the life of your appliance. If the water in your area is very hard, the
descaling should be performed more frequently.
1) Remove the water reservoir.
2) Remove the rubber inlet cover.
3) Fill the reservoir to the max line – we recommend using distilled water.
4) Close the inlet cover and wipe off any water on the reservoir surface.
5) Return the reservoir to the handheld garment steamer, making sure that it snaps
securely into place.
6) Plug the unit into the electrical mains outlet.
7) Press the «ON» (|) - «OFF» (O) button to turn the handheld garment steamer
«ON» (|).
76
Troubleshooting
For troubleshooting and FAQs visit www.breville.co.uk/faqs.
Problems Possible Causes Solutions
There is no steam. The appliance is not
plugged in, or not
switched on.
Check that your appliance
is correctly plugged in and
switched on.
The water level is too low. Unplug your appliance
and rell it.
The steam pump has not
been primed.
Refer to the ‘Priming
your handheld garment
steamer before use’
section.
You are using the
appliance for the rst time.
Refer to the ‘Priming
your handheld garment
steamer before use’
section.
8) The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
9) Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
10) When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
11) Stand the handheld garment steamer on its base on a at, stable and heat-
resistant surface.
12) Position the steam nozzle away from you and others.
13) Press and hold the +/- steam setting button and steam button at the same time
for 5 seconds.
14) The handheld garment steamer will enter a cleaning cycle for 1 minute. The
steam mode indicator lights will blink quickly whilst in cleaning mode.
15) Once the cleaning cycle is complete, the unit will automatically enter drying mode
for 20 seconds. The drying cycle is complete once the steam mode indicator lights
stops blinking.
16) The steam setting will return to the previous selection.
Care & cleaning
Warning: Do not use harsh abrasives, chemical cleaners or solvents to clean the
exterior of your handheld garment steamer. Do not immerse the appliance or power
cord and plug in water or any other liquid.
Allow your handheld garment steamer to completely cool down and wipe the press
plate and exterior with a soft damp cloth. Wipe dry before storing.
After sales service and replacement parts
In the case the appliance does not operate but is under warranty, return the product
to the place it was purchased for a replacement. Please be aware that a valid form of
proof of purchase will be required. For additional support, please contact our Consumer
Service Department at 0800 028 7154 or email:
Waste disposal
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. E-mail us at
WEEE information.
Problems Possible Causes Solutions
There is no steam. The water tank is not fully
in place.
Ensure that the ll inlet
cover is closed and that
the water tank snaps
when put into place.
The appliance is in
auto-off mode.
Refer to the ‘Auto shut
off feature’ section.
There is noise emitting
from the appliance.
The water level is too low
and the pump is pulling
air.
Unplug your appliance
and rell it.
The appliance is heating
up.
This is normal when the
appliance is heating up.
The appliance does not
heat up.
The appliance is not
plugged in, or not
switched on.
Check that your appliance
is correctly plugged in and
switched on.
The appliance is in
auto-off mode.
Refer to the ‘Auto shut
off feature’ section.
The water tank is leaking. The water tank is not
fully in place or the ll
inlet cover is not closed
properly.
Ensure that the ll inlet
cover is closed and that
the water tank snaps
when put into place.
Steam rate decreases. Calc build up. Refer to the ‘Descaling
instructions’ section.
The steam leaves stains
on the fabric or the
appliance spits.
You are using water with
additives.
Never add any additive in
the water tank.
The appliance has not
been cleaned enough
after the descaling
operation.
Refer to the ‘Descaling
instructions’ section.
You are using liquids other
than water to descale the
product.
Use only water during
descaling operation. We
recommend using distilled
water.
Electrical safety
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type. If the fuse in a moulded plug needs to be
changed, the fuse cover must be retted. The appliance must not be used without the
fuse cover tted.
If the plug fuse requires replacement,
a fuse of the same rating as that
tted by the manufacturer must be
used. In order to prevent a hazard
do not t a fuse of a lower or higher
rating.
If the terminals in the plug are not
marked or if you are unsure about
the installation of the plug please
contact a qualied electrician.
76
Troubleshooting
For troubleshooting and FAQs visit www.breville.co.uk/faqs.
Problems Possible Causes Solutions
There is no steam. The appliance is not
plugged in, or not
switched on.
Check that your appliance
is correctly plugged in and
switched on.
The water level is too low. Unplug your appliance
and rell it.
The steam pump has not
been primed.
Refer to the ‘Priming
your handheld garment
steamer before use’
section.
You are using the
appliance for the rst time.
Refer to the ‘Priming
your handheld garment
steamer before use’
section.
8) The power indicator will illuminate and will ash every second whilst the unit
pre-heats.
9) Allow the handheld garment steamer to warm up. This can take up to 35 seconds.
10) When the power indicator stops ashing and illuminates solid, the appliance is
ready to use.
11) Stand the handheld garment steamer on its base on a at, stable and heat-
resistant surface.
12) Position the steam nozzle away from you and others.
13) Press and hold the +/- steam setting button and steam button at the same time
for 5 seconds.
14) The handheld garment steamer will enter a cleaning cycle for 1 minute. The
steam mode indicator lights will blink quickly whilst in cleaning mode.
15) Once the cleaning cycle is complete, the unit will automatically enter drying mode
for 20 seconds. The drying cycle is complete once the steam mode indicator lights
stops blinking.
16) The steam setting will return to the previous selection.
Care & cleaning
Warning: Do not use harsh abrasives, chemical cleaners or solvents to clean the
exterior of your handheld garment steamer. Do not immerse the appliance or power
cord and plug in water or any other liquid.
Allow your handheld garment steamer to completely cool down and wipe the press
plate and exterior with a soft damp cloth. Wipe dry before storing.
After sales service and replacement parts
In the case the appliance does not operate but is under warranty, return the product
to the place it was purchased for a replacement. Please be aware that a valid form of
proof of purchase will be required. For additional support, please contact our Consumer
Service Department at 0800 028 7154 or email:
Waste disposal
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. E-mail us at
WEEE information.
Problems Possible Causes Solutions
There is no steam. The water tank is not fully
in place.
Ensure that the ll inlet
cover is closed and that
the water tank snaps
when put into place.
The appliance is in
auto-off mode.
Refer to the ‘Auto shut
off feature’ section.
There is noise emitting
from the appliance.
The water level is too low
and the pump is pulling
air.
Unplug your appliance
and rell it.
The appliance is heating
up.
This is normal when the
appliance is heating up.
The appliance does not
heat up.
The appliance is not
plugged in, or not
switched on.
Check that your appliance
is correctly plugged in and
switched on.
The appliance is in
auto-off mode.
Refer to the ‘Auto shut
off feature’ section.
The water tank is leaking. The water tank is not
fully in place or the ll
inlet cover is not closed
properly.
Ensure that the ll inlet
cover is closed and that
the water tank snaps
when put into place.
Steam rate decreases. Calc build up. Refer to the ‘Descaling
instructions’ section.
The steam leaves stains
on the fabric or the
appliance spits.
You are using water with
additives.
Never add any additive in
the water tank.
The appliance has not
been cleaned enough
after the descaling
operation.
Refer to the ‘Descaling
instructions’ section.
You are using liquids other
than water to descale the
product.
Use only water during
descaling operation. We
recommend using distilled
water.
Electrical safety
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type. If the fuse in a moulded plug needs to be
changed, the fuse cover must be retted. The appliance must not be used without the
fuse cover tted.
If the plug fuse requires replacement,
a fuse of the same rating as that
tted by the manufacturer must be
used. In order to prevent a hazard
do not t a fuse of a lower or higher
rating.
If the terminals in the plug are not
marked or if you are unsure about
the installation of the plug please
contact a qualied electrician.
Other manuals for EliteTemp VIN433
1
Table of contents
Other Breville Steam Cleaner manuals
