BRIFIELD BR3 User manual

BRIFIELD®
BR3 BODY CAMERA
USER MANUAL
Customer Service Email
[e-mail]

CONTENTS
Page 1- BR3 Diagram
Page 2/ 3/ 4- BR3 Diagram
explanation
Page 5- Screen functions / Menu
functions
Page 6/ 7/ 8- Menu functions
Page 9/ 10 / 11 - Important
information
Page 12 - Product box contents /
Customer service

1

2
BR3 DIAGRAM EXPLANATION
1 - Right LED light: A. Flat GREEN when idle. B.
Flashing RED when recording a video. C.
Temporary flat RED when a picture is taken in idle
mode. D. Flashing AMBER light when recording an
audio recording. E. Flat GREEN when the USB
lead is connected to a computer.
2 - Left LED light: A. Flat WHITE when device is
fully charged. B. Flat BLUE when charging and
when the USB lead is connected to a computer.
3 - Sensor: Detects low and high light levels, this
is what triggers the automatic IR night vision.
4 - Infrared night vision lights: Gives a white
vision that helps in very low light areas, or
nighttime.
5 - White LED light: Helps in low light areas.
6 - Lens: Capture Video and images. The lens is
also what triggers the motion detection.
7 - USB port: Connect the BR3 USB cable to your
computer, from there you can transfer your

3
recorded video, audio files and pictures to the
computer. Reset hole: Next to the USB port. This
is used to reset the device.
8 - Picture button: A. In idle mode, press to take a
picture. B. While recording a video, press to take a
picture.
9 - Audio record button: A. In idle mode, press to
start an audio recording. B. When recording a
video, press to mute/unmute the microphone. C. In
idle mode and also while recording, hold for 2
seconds to switch between 720p and 1080p video
resolutions.
10 - 2 Inch LCD screen.
11 - Left button: A. In idle mode, press to play the
last recorded video, audio or picture. B. In
playback mode, press to rewind the video. C. In
menu mode, press to scroll up. D. In playback
mode, hold to zoom out the picture.
12 - Middle button: A. In idle mode, press to
access the playback mode. B. When recording a
video or audio recording, press once to activate the
Important file button. This will add a STAR icon
on the video or audio file in playback mode. This

4
will also add a S letter at the end of the file name-
on your computer. This helps to easily identify the
more important video and audio files.
C. In playback mode, press to play and pause the
recording. D. In menu mode, press to select.
13 - Right button: A. In idle mode, press to enter
menu mode. B. In menu mode, press to scroll
down. C. In playback mode, press to fast forward
the video. D. In playback mode, hold to zoom in
the picture.
14 - Video record button: A. In idle mode, press
once to start a video recording. B. When the
device is switched off, hold for 3 seconds to power
on the device, and start a video recording
immediately.
15 - IR Light / White LED light button: A. In both
idle mode and while video recording, press to turn
on/off the IR night vision lights. B. In both idle
mode and while recording a video, hold for 2
seconds to turn on/off the white LED light.
16 - Power button: A. Hold for 3 seconds to
switch the device on/off. B. Press to go back or
exit. C. Press to turn the LCD screen on/off.

5
SCREEN FUNCTIONS
MENU FUNCTIONS
Use left button number 11 to go up. Right button
number 13 to go down. Middle button number 12 to
select. Button number 16 to go back.
- Video Resolutions: Change the video
resolutions.
- Picture Megapixel: Change the Megapixel of the
camera.

6
- Burst: These are different picture burst options.
Let’s say you select 5 bursts, now when you take a
picture, 5 pictures will be taken one after the other.
- Self timer: This gives you a countdown, when the
countdown reaches 0 then a picture will be taken.
- Continuous shooting: When on, pressing the
picture button will activate continuous shots every
5 or 10 seconds depending on what you have
selected in the menu. To stop the continuous shots,
press the picture button once again.
- Quality: The quality of the video recordings.
- Pre-record: This feature will pre-record a short
clip before you press the record button, it will then
integrate itself into the main recording.
- Delay record: The amount of time the device
waits until it stops the video recording.
- Loop record: When the memory card becomes
full, the loop feature will automatically override the
earliest recording then continue to record over the
following recorded videos.
- Split time: This is how long you want the video
clips to be.
- Slide show: This allows a slideshow within the
internal picture playback mode. Changes picture
every 5 seconds.
- Infrared: Manual Mode lets you turn the IR on
and off yourself manually, and auto mode activates

7
the IR automatically when the view in front of the
lens is dark and deactivates when the view is light.
- Motion Detection: Turn on/off. You will know the
motion detection is activated because there will
now be a face icon on the LCD screen. Once the-
motion detection is turned on from within the menu,
press the record button. Now any motion in front of
the lens will trigger the device to start a video
recording. The device will continue to record, but
when there is no longer any motion in front of the
lens, there is a 10 second countdown. After the 10
seconds, the video will stop recording.
- Record warning: When turned on, the device
voice says ‘’Recording started.’’ When deactivated,
there is no voice.
- Language: Select your language.
- Screen save: The amount of time the screen will
stay on until the LCD screen turns off.
- LCD Brightness: Option of Low / High.
- Auto Power off: The amount of time the device
will remain idle before powering off.
- LED light: Option to turn the 2 LED lights at the
top of the BR3 permanently off.
- Key tone: Turn the key tone on/off.
- Volume: Change the volume of camera speaker.
This affects the loudness of video playback, audio
playback, the key tone, record warning, and any
other sounds played by camera. This does not

8
affect the volume of the recorded video or audio
files themselves.
- ID Setting: Change the user ID. Use the left and
right keys to change the letter or number and use
the middle key to select and move onto the next
character.
- Change password: Use the left and right buttons
to change character and use the middle button to
select and move onto the next character.
- Time setup: Adjust the time and date.
- Default setting: This will reset the internal
settings back to the default settings.
- Version of the device: The version of the current
device.

9
IMPORTANT INFORMATION
Memory Card (MAC users only): The only way to
completely delete your recorded files and free up
your memory from your BR3 body camera, is to
empty your trash bin on your MAC. If you don’t do
this, then eventually the memory card will become
full, and when it’s full you won’t be able to record
any new footage.
The clips and attachment studs rotate 360
degrees: The crocodile clip, epaulette clip, chest
harness and shoulder harness attachment studs,
and the KlickFast stud ALL turn 360 degrees. Slot
the stud or clip into the back of the BR3 then turn
the clip or stud vertically. Or you can slot the clips
and studs into the back of the body camera first,
then attach the body camera to the chest or
shoulder harness or KlickFast dock, then turn the
body camera vertically. To unlock the KlickFast:
to unlock the stud from the dock, turn the body
camera 180 degrees, then pull up and out. Do the
same thing to the stud if the body cam is not
connected.
Transfer files to PC: Plug the USB lead into the
computer. Enter the password. Find the drive file

10
on the computer. Once you are in the file, click
onto the DCIM file. From there you can access all
the recorded files. Drag the files from the DCIM
files to your computer.
Change password: Access the change password
within the menu, enter your old password (Left key
to go up, and right key to go down, middle key to
select and move on to the next one. The default
password is 000000) Now enter the new password.
Then enter your new password again to confirm it.
Change user ID: Select ID setting from the menu.
Use left key to go up, use right key to go down, use
middle key to select and move on to the next
character.
Reset device: To reset the device, use a small
needle to jab the reset button. The reset button is
located next to the USB port.
Computer playback app: There are many
different video playback apps online, some are
free. You will need to download one to playback
the video and audio files from this device. Or your
computer might already have one pre-installed.
Delete files: You can only delete the recorded files
from a computer. This is to stop people from getting
rid of the evidence straight from the device itself. To

11
delete the files from your computer, right click, then
delete them.
32GB Memory card: There is a 32GB memory
card built into the device, however the internal
settings take up some memory space. The actual
amount of memory you will get after the internal
settings is normally around 28.6GB to 29.8GB.
Product warranty: We offer a 12-month warranty
on the Brifield BR3 body camera. This warranty
covers faults that was caused by the manufacturer.
If the fault was caused by the customer, then the
warranty will be void.
BR3 USB Lead: Please only use the USB lead
provided in the product box. Using other USB leads
might cause damage to the BR3 body camera.
IP65 Water rating: Please note that the BR3 body
camera is not fully waterproof. Do not submerge it
into water. IP65 is the rating of the BR3 body camera,
this is resistant to weather and dust. Rain will not
damage the BR3.

12
PRODUCT BOX CONTENTS
1 X BR3 BODY CAMERA
1 X USER MANUAL
1 X USB LEAD
1 X UK 3 PIN PLUG
1 X EPAULETTE CLIP
1 X CROCODILE CLIP
1 X SHOULDER HARNESS
1 X CHEST HARNESS
1 X KLICKFAST STUD
1 X KLICKFAST DOCK
CUSTOMER SERVICE
If you have any questions at all then please feel
free to email us.
We guarantee a reply to your email within 12
hours.
We will do our absolute best to help you with all
your questions and any technical problems.
Email address: [e-mail]

BRIFIELD®
BR3 BODY CAMERA
USER MANUAL
Customer Service Email
[e-mail]