Brightz bouncebrightz User manual

BATTERY INSTALLATION  AA*
* Bouncebrightz™ will automatically turn off after 4 hours to conserve battery.
 "
2. Attach clips to the inside of
the trampoline’s protective
mat at approximately
6 inch intervals.
INSTALLATION
L AT C H ES
bouncebrightz™
INSTRUCTIONS
[e-mail]
419 . 517. 0049
1. Pick a location for battery pack, such as the leg of the
trampoline. Attach tightly using the adjustable strap.

©2021 Brightz, Ltd.
All rights reserved
8000 Yankee Road Suite 225
Ottawa Lake, MI 49267
CAUTION: Batteries may explode or leak, and cause
burn injury if recharged, disposed of in fire, mixed with a
different battery type, or inserted backwards. Replace
all used batteries at the same time. Clean battery
contacts and contacts on the device prior to installing.
Remove batteries if item will not be used for long
periods of time. When battery expires remove promptly.
OPERATION
Press the power button for
three modes and on/off.
1. Color morph
2. Select a color
3. Motion activated color jump
4. Hold to power off
INSTALLATION CONT.
4. Secure the jump sensor
between a clip and the
tubing. Use the included zip
tie for extra security.
3. Wrap LED lights around
both sides of the trampoline,
securing tubing into the clips
as you go.
POWER
CHOKING HAZARD!
Small parts. Not for children 3 years of age
or under.
WARNING: Trampolines are inherently
dangerous. This device does not make
trampoline use safer.
SENSOR