Brilliance BDM3270QP User manual

www.philips.com/welcome
BDM3270QP
EN User manual 1
Customer care and warranty 21
Troubleshooting & FAQs 27

Table of Contents
1. Important ...............................................1
1.1 Safety precautions and maintenance .1
1.2 Notational Descriptions ............................2
1.3 Disposal of product and packing
material ...............................................................3
2. Setting up the display ...........................4
2.1 Installation .........................................................4
2.2 Operating the display .................................6
2.3 MultiView .......................................................10
2.4 Remove the Base Assembly for VESA
Mounting .........................................................12
2.5 MHL(MobileHigh-DenitionLink)
introduction .................................................13
3. Image Optimization ...........................14
3.1 SmartImage ...................................................14
3.2 SmartContrast .............................................15
4. TechnicalSpecications.....................16
4.1 Resolution & Preset Modes .................19
4.2 Crystalclear ..................................................19
5. Power Management ...........................20
6. Customer care and warranty ..........21
6.1 Philips’ Flat Panel Displays Pixel Defect
Policy .................................................................21
6.2 Customer Care & Warranty ...............23
7. Troubleshooting & FAQs ..................27
7.1 Troubleshooting ..........................................27
7.2 General FAQs ..............................................28
7.3 Multiview FAQs ..........................................31

1
1. Important
1. Important
This electronic user’s guide is intended for
anyone who uses the Philips Display.Take time
to read this user’s manual before you use your
display. It contains important information and
notes regarding the operation of your display.
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer’s
name and model and production number of the
product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or procedures
otherthanthosespeciedinthisdocumentation
may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Read and follow these instructions when
connecting and using your computer Display.
Operation
• Please Keep the display out of direct
sunlight, very strong bright lights and away
from any other heat source. Lengthy
exposure to this type of environment may
result in discoloration and damage to the
display.
• Remove any object that could fall into
ventilation holes or prevent proper cooling
of the display’s electronics.
• Do not block the ventilation holes on the
cabinet.
• When positioning the display, make sure
the power plug and outlet are easily
accessible.
• If turning off the display by detaching the
power cable or DC power cord, wait for 6
seconds before attaching the power cable
or DC power cord for normal operation.
• Please use approved power cord provided
by Philips at all times. If your power cord
is missing, please contact your local service
center. (Please refer to Customer Care
ConsumerInformationCenter)
• Do not subject the display to severe
vibration or high impact conditions during
operation.
• Do not knock or drop the display during
operation or transportation.
Maintenance
• To protect your display from possible
damage, do not put excessive pressure on
the LCD panel. When moving your display,
grasp the frame to lift; do not lift the
display by placing your hand or fingers on
the LCD panel.
• Unplug the display if you are not going to
use it for an extensive period of time.
• Unplug the display if you need to clean it
with a slightly damp cloth.The screen may
be wiped with a dry cloth when the power
is off. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids
to clean your display.
• To avoid the risk of shock or permanent
damage to the set, do not expose the
display to dust, rain, water, or excessive
moisture environment.
• If your display gets wet, wipe it with dry
cloth as soon as possible.
• If foreign substance or water gets in
your display, please turn the power off
immediately and disconnect the power
cord.Then, remove the foreign substance
or water, and send it to the maintenance
center.
• Do not store or use the display in locations
exposed to heat, direct sunlight or extreme
cold.
• In order to maintain the best performance
of your display and use it for a longer
lifetime, please use the display in a location
that falls within the following temperature
and humidity ranges.

2
1. Important
• Temperature: 0-40°C 32-95°F
• Humidity: 20-80% RH
Important information for Burn-in/Ghost
image
• Always activate a moving screen saver
program when you leave your display
unattended. Always activate a periodic
screen refresh application if your display
will display unchanging static content.
Uninterrupted display of still or static
images over an extended period may cause
“burn in”, also known as “after-imaging” or
“ghost imaging”, on your screen.
• “Burn-in”, “after-imaging”, or “ghost imaging”
is a well-known phenomenon in LCD panel
technology. In most cases, the “burned in”
or “after-imaging” or “ghost imaging” will
disappear gradually over a period of time
after the power has been switched off.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired.The damage mentioned above is not
covered under your warranty.
Service
• The casing cover should be opened only by
qualified service personnel.
• If there is any need for any document for
repair or integration, please contact with
your local service center. (please refer to
the chapter of “Consumer Information
Center”)
• For transportation information, please refer
to “Technical Specifications”.
• Do not leave your display in a car/trunk
under direct sun light.
Note
Consult a service technician if the display does
not operate normally, or you are not sure
what procedure to take when the operating
instructions given in this manual have been
followed.
1.2 Notational Descriptions
The following subsections describe notational
conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be
accompanied by an icon and printed in bold or
italic type.These blocks contain notes, cautions
or warnings.They are used as follows:
Note
This icon indicates important information and
tips that help you make better use of your
computer system.
Caution
This icon indicates information that tells you
how to avoid either potential damage to
hardware or loss of data.
Warning
This icon indicates the potential for bodily harm
and tells you how to avoid the problem.
Some warnings may appear in alternate formats
and may not be accompanied by an icon. In such
cases,thespecicpresentationofthewarningis
mandated by the relevant regulatory authority.

3
1. Important
1.3 Disposal of product and packing
material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its
packaging illustrates that, under European
Directive 2012/19/EU governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste.You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
yourlocalgovernmentofce,thewastedisposal
organization that serves your household or the
store at which you purchased the product.
Your new display contains materials that can be
recycled and reused. Specialized companies can
recycle your product to increase the amount of
reusable materials and to minimize the amount
to be disposed of.
All redundant packing material has been
omitted.We have done our utmost to make the
packaging easily separable into mono materials.
Pleasendoutaboutthelocalregulationson
how to dispose of your old display and packing
from your sales representative.
Taking back/Recycling Information for
Customers
Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization's product,
service and activities.
From the planning, design and production
stages, Philips emphasizes the important of
making products that can easily be recycled. At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors,
which recycle all materials (products and related
packagingmaterial)inaccordancewithall
Environmental Laws and taking back program
with the contractor company.
Your display is manufactured with high quality
materials and components which can be
recycled and reused.
To learn more about our recycling program
please visit
http://www.philips.com/a-w/about/sustainability.
html

4
2. Setting up the monitor
2. Setting up the display
2.1 Installation
Package contents
BDM3270QP
* VGA
©
2
0
1
6
K
o
n
i
n
k
l
i
j
k
e
P
h
i
l
i
p
s
N
.
V
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a
p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
V
e
r
s
i
o
n
Philipsand the Philips’ Shield Emblem are registered trademarks of
KoninklijkePhilips N.V.and are used under license from Koninklijke
PhilipsN.V.
使用 前请阅读使用说明
保留备用
* HDMI
* DP
Dual-link DVI
* USB * MHL
Power Audio
Display
Display drivers
User’s Manual
*Different according to region.
Install the base
1. Place the display face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Hold the neck with both hands.
(1)GentlyattachthenecktotheVESA
mount area until the latch locks the
neck.
(2)Useascrewdrivertotightenthe
assembly screws, and secure the neck to
the display tightly.
(3)Useyourngerstotightenthescrew
located at the bottom of the base, and
secure the base to the stand tightly.
3
2
1

5
2. Setting up the monitor
Connecting to your PC
1
7
8
6 5 4 3 2
10
9
12
11
1Kensington anti-theft lock
2Earphone jack
3Audio input
4VGA input
5Display port input
6MHL-HDMI input
7DVI input
8AC power input
9Power Switch
10 USB upstream
11 USB downtream
12 USB fast charger
Connect to PC
1. Connect the power cord to the back of
thedisplayrmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the display signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer and
your display into a nearby outlet.
5. Turn on your computer and display. If the
display displays an image, installation is
complete.

6
2. Setting up the monitor
2.2 Operating the display
Description of the control buttons
5 4
3
21
76
Switch display’s power ON or
OFF.
Access the OSD menu .
ConrmtheOSDadjustment.
Adjust the OSD menu.
User preference key. Customize
your own preference function
from OSD to become the “user
key”.
PIP/PBP/Off/Swap
Return to previous OSD level.
SmartImage hot key.There
are7modestoselect:Ofce,
Photo, Movie, Game, Economy,
SmartUniformity, Off.
Customize your own “USER” key
This hot key allows you to setup your favorite
function key.
1. Press button on the front bezel to
enter OSD Menu Screen.


 



  


 

2. Press▲or▼buttontoselectmainmenu
[OSD Settings], then press button.
3. Press▲or▼buttontoselect[User],
then press button.
4. Press▲or▼buttontoselectyour
preferred function: [Audio Source],
[Volume], or [Input].
5. Press buttontoconrmyourselection.
Now you can press the hotkey directly on the
front bezel. Only your pre-selected function will
appear for quick access.
For example, if you selected [Audio Source] as
the hotkey, press the button on the front
bezel, the [Audio Source] menu appears.

7
2. Setting up the monitor
MHL-HDMI
DisplayPort
Audio In
Audio Source
Independent audio playback, regardless of
video input
Your Philips display can play the audio source
independently, regardless of which video input.
For example, you can play your MP3 player
from the audio source connected to the [Audio
in] port of this display, and still watch your
video source connected from [MHL-HDMI], or
[DisplayPort].
1. Press button on the front bezel to
enter OSD Menu Screen.
PIP/PBP
Audio
Picture
Input
Color
Volume
Stand-Alone
Mute
Audio Source
DisplayPort
Audio In
MHL-HDMI
2. Press▲or▼buttontoselectmainmenu
[Audio], then press button.
3. Press▲or▼buttontoselect
[Audio Source], then press button.
4. Press▲or▼buttontoselectyour
preferred audio source: [DisplayPort],
[MHL-HDMI], or [Audio In].
5. Press buttontoconrmyourselection.
Note
• The next time you turn on this display, it
will by default select the audio source you
previously selected.
• In case you want to change it, you will have
to go through the selection steps again to
select your new preferred audio source as
the default.
Description of the On Screen Display
What is On-Screen Display (OSD)?
On-ScreenDisplay(OSD)isafeatureinall
Philips LCD displays. It allows an end user to
adjust screen performance or select functions
of the displays directly through an on-screen
instruction window. A user friendly on screen
display interface is shown as below:
DisplayPort
MHL-HDMI
DVI
VGA
Color
Audio
PIP/PBP
Picture
Input
Basic and simple instruction on the control
keys
In the OSD shown above, you can press
buttons at the front bezel of the display
to move the cursor, and press OK button to
conrmthechoiceorchange.

8
2. Setting up the monitor
The OSD Menu
Below is an overall view of the structure of
the On-Screen Display.You can use this as a
reference when you want to work your way
around the different adjustments later on.
Main menu Sub menu
Picture
OSD Settings
Setup
Language
Color
Input
Audio
PIP/PBP
Horizontal
Vertical
Transparency
OSD Time Out
Auto
V. Position
Phase
Clock
Color Temperature
sRGB
User Dene
H. Position
Resolution Notication
Reset
Information
DisplayPort
SmartResponse
Picture Format
SmartContrast
Gamma
Pixel Orbiting
Over Scan
DPS
Contrast
Brightness
Volume
Mute
Audio Source
Stand-Alone
PIP Position
PIP/PBP Mode
Swap
PIP Size
PIP/PBP Input
User
DVI
MHL-HDMI
DisplayPort
VGA
(available for selective models)
0~100
0~100
O, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
0~100
0~100
0~100
5000K, 6500K, 7500K,
8200K, 9300K, 11500K
Red: 0~100
Green: 0~100
Blue: 0~100
0~100
On, O
Yes, No
1.1, 1.2
Input, Audio Source, Volume
0~100
On, O
On, O
On, O
0~100
On, O
Audio in, MHL-HDMI, DisplayPort
O, Fast, Faster, Fastest
On, O
1.8, 2.0, 2.2, 2.4, 2.6
0~100
Wide screen, 4:3, 16:9, Movie 1, Movie 2, 1:1
On, O
Small, Middle, Large
Top-Right, Top-Left, Bottom-Right,
Bottom-Left
VGA,DVI, MHL-HDMI, DisplayPort
O, PIP, PBP
English, Deutsch, Español, Ελληνική, Français, Italiano,
Maryar, Nederlands, Português, Português do Brasil,
Polski, Русский, Svenska, Suomi, Türkçe, Čeština,
Українська,
简体中文, 繁體中文, 日本語, 한국어
Sharpness 0~100
 Resolutionnotication
This display is designed for optimal performance
at its native resolution,
2560 x 1440 @ 60 Hz.When the display is
powered on at a different resolution, an alert is
displayed on screen: Use
2560 x 1440 @ 60 Hz for best results.
Display of the native resolution alert can be
switched off from Setup in the OSD
(OnScreenDisplay)menu.

9
2. Setting up the monitor
Physical Function
Tilt
20˚
-5˚
Swivel
+170˚
-170˚
Height adjustment
180mm
Pivot
90˚
0˚

10
2. Setting up the monitor
2.3 MultiView
What is it?
Multiview enables active dual connect and view
so that you can work with multiple devices like
PC and Notebook side-by-side simultaneously,
making complex multi-tasking work a breeze.
Why do I need it?
With the ultra high resolution Philips
MultiView display, you can experience a world
of connectivity in a comfortable way in the
ofceorathome.Withthisdisplay,youcan
conveniently enjoy multiple content sources at
one screen. For example:You may want to keep
an eye on the live news video feed with audio
in the small window, while working on your
latestblog,oryoumaywanttoeditanExcelle
from your Ultrabook, while logged into secured
companyintranettoaccesslesfromadesktop.
How to enable MultiView by hotkey?
1. Press the hotkey directly on the
front bezel.
2. The MultiView selection menu appears.
Press▲or▼buttontoselect.
PBP
Swap
Off
PIP
Multi View
P
3. Press buttontoconrmyourselection
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey directly
on the front bezel, the MultiView function can
also be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
PIP/PBP
Audio
Picture
Input
Color
PIP/PBP Mode
PIP/PBP Input
PIP Size
Swap
PIP Position
Off
PIP
PBP
• Press▲or▼buttontoselectmainmenu
[PIP / PBP], then press button.
• Press▲or▼buttontoselect[PIP / PBP
Mode], then press button.
• Press▲or▼buttontoselect[PIP] or
[PBP].
• Now you can move backward to set the
[PIP / PBP Input], [PIP Size], [PIP Position].,
or [Swap].
2. Press buttontoconrmyourselection.
MultiView in OSD menu
• PIP / PBP Mode:There are two modes for
MultiView: [PIP] and [PBP].
[PIP]: Picture in Picture

11
2. Setting up the monitor
Open up a sub-window of
another signal source.
B
A(main)
When the sub source is not
detected:
B
A(main)
[PBP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source. A(main) B
When the sub source is not
detected: A(main)
Note
• The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
• PIP / PBP Input: There are four different
video input to choose as the sub display
source: [DVI], [MHL-HDMI], and
[DisplayPort].
Please refer below table for compatibility
of main/sub input source.
SUB SOURCE
POSSIBILITY (xl)
Inputs VGA DP DVI MHL-
HDMI
MAIN
SOURCE
(xl)
VGA ● ● ●
DP ● ● ●
DVI ● ● ●
MHL-
HDMI ● ● ●
• PIP Size: When PIP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
B
A(main)
Small
Middle
Large
• PIP Position: When PIP is activated, there
are two sub-window positions to choose.
Top-Right Bottom-Right
B
A(main) A(main)
B
Top-Left Bottom-Left
B
A(main)
B
A(main)
Swap: The main picture source and the sub
picture source swapped on the display.
Swap A and B source in [PIP] mode:
B
A(main) ↔ B(main)
A
Swap A and B source in [PBP] mode:
A(main) B↔ B(main) A

12
2. Setting up the monitor
• Off: Stop MultiView function.
A(main)
Note
• When you do the SWAP function, the
video and its audio source will swap
at the same time. (Refer to page 7
“Independent audio playback, regardless of
video input”formoredetail.)
2.4 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the display base,
please follow the instructions below to avoid
any possible damage or injury.
1. Place the display face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Loosen the assembly screws, then detach
the neck from the display.
1
2
Note
This display accepts a 100mm x 100mm
VESA-Compliant mounting interface.
100mm
100mm

13
2. Setting up the monitor
2.5 MHL(MobileHigh-Denition
Link) introduction
What is it?
MobileHighDenitionLink(MHL)isamobile
audio/video interface for directly connecting
mobile phones and other portable devices to
high-denitiondisplays.
An optional MHL cable allows you to simply
connect your MHL capable mobile device to
this large Philips MHL display, and watch your
HD videos come to life with full digital sound.
Now not only you can enjoy your mobile
games, photos, movies, or other apps on its
big screen, you can simultaneously charge your
mobile device so you never run out of power
half way.
How do I use the MHL function?
To use the MHL function, you need an MHL-
Certiedmobiledevice.TondalistofMHL-
certieddevices,visittheofcialMHLwebsite
(http://www.mhlconsortium.org)
YoualsoneedaoptionalMHLcertiedspecial
cable in order to use this function.
How does it work? (how do I connect?)
Connect the Optional MHL cable to the mini
USB port on the mobile device side, and the
[MHL-HDMI] marked port on the display side.
You are now ready to view the images on your
big screen display and operate all function on
youthemobiledevicesuchasinternetsurng,
game playing, photo browsing…etc. if your
display has speaker function, then you will be
able to hear accompanying sound too.When
the MHL cable is disconnected or the mobile
device is turned off, the MHL function will be
automatically disabled.
MHL
MHL-HDMI
Note
• The port marked [MHL-HDMI] is the only
port on the display that supports the MHL
function when the MHL cable is used. Note
that the MHL certified cable is different
than a standard HDMI cable.
• A mobile device with MHL certification
must be purchased separately
• You may have to manually switch the
display to MHL-HDMI mode in order
to activate the display, if you have other
devices already working and connected to
available inputs
• Standby/Off energy saving of ErP is
not applicable for the MHL charging
functionality
• This Philips display is MHL certified.
However, in case your MHL device does
not connect or work correctly, check with
your MHL device FAQ or vendor directly
for direction.The policy of your device
manufacturer may require you to purchase
their brand specific MHL cable or adapter
in order to work with other brand MHL
devices. Note that this is not a fault of this
Philips display.

14
3. Image Optimization
3. Image Optimization
3.1 SmartImage
What is it?
SmartImage provides presets that optimize
display for different types of content, dynamically
adjusting brightness, contrast, color and
sharpness in real time.Whether you're working
with text applications, displaying images or
watching a video, Philips SmartImage delivers
great optimized display performance.
Why do I need it?
You want a display that delivers optimized
display all your favorite types of content,
SmartImage software dynamically adjust
brightness, contrast, color and sharpness in
real time to enhance your display viewing
experience.
How does it work?
SmartImage is an exclusive, leading edge Philips
technology that analyzes the content displayed
on your screen. Based on a scenario you select,
SmartImage dynamically enhances the contrast,
color saturation and sharpness of images to
enhance the contents being displayed - all in
real time with the press of a single button.
How to enable SmartImage?
1. Press to launch the SmartImage on
screen display.
2. Keep pressing to toggle among
Ofce,Photo,Movie,Game,Economy,
SmartUniformity and Off.
3. The SmartImage on screen display will
remain on screen for 5 seconds, or you can
alsopress"OK"tomakeconrmation.
Therearesevenmodestoselect:Ofce,Photo,
Movie, Game, Economy, SmartUniformity and
Off.
Photo
Movie
Game
Economy
SmartUniformity
ff
Office
SmartImage
• Office:Enhances text and dampens
brightness to increase readability and
reduce eye strain.This mode significantly
enhances readability and productivity when
you’re working with spreadsheets, PDF files,
scanned articles or other general office
applications.
• Photo:This profile combines color
saturation, dynamic contrast and sharpness
enhancement to display photos and other
images with outstanding clarity in vibrant
colors - all without artifacts and faded
colors.
• Movie:Ramped up luminance, deepened
color saturation, dynamic contrast and
razor sharpness displays every details in
darker areas of your videos without color
washout in brighter areas maintaining a
dynamic natural values for the ultimate
video display.
• Game:Turn on over drive circuit for best
response time, reduce jaggy edges for fast
moving objects on screen, enhance contrast
ratio for bright and dark scheme, this
profile delivers the best gaming experience
for gamers.

15
3. Image Optimization
• Economy:Under this profile, brightness,
contrast are adjusted and backlighting
finetuned for just right display of everyday
office applications and lower power
consumption.
• SmartUniformity: Fluctuations in brightness
and color on different parts of a screen
are a common phenomenon among LCD
displays. Typical uniformity is measured
around 75-80%. By enabling Philips
SmartUniformity feature, display uniformity
is increased to above 95%. This produces
more consistent and true images.
• Off:No optimization by SmartImage.
3.2 SmartContrast
What is it?
Unique technology that dynamically analyzes
displayed content and automatically optimizes
a Display's contrast ratio for maximum visual
clarity and viewing enjoyment, stepping up
backlighting for clearer, crisper and brighter
images or dimming backlighting for clear display
of images on dark backgrounds.
Why do I need it?
You want the very best visual clarity and
viewing comfort for every type of content.
SmartContrast dynamically controls contrast
and adjusts backlighting for clear, crisp, bright
gaming and video images or displays clear,
readabletextforofcework.Byreducingyour
display's power consumption, you save on
energy costs and extend the lifetime of your
display.
How does it work?
When you activate SmartContrast, it will analyse
the content you are displaying in real time to
adjust colors and control backlight intensity.This
function will dynamically enhance contrast for a
great entertainment experience when viewing
videos or playing games.

16
4. Technical Specications
4. Technical Specifications
Picture/Display
Display Panel Type AMVA
Backlight LED
Panel Size 32"W(81.3cm)
Aspect Ratio 16:9
Pixel Pitch 0.27675 x 0.27675 mm
SmartContrast 50,000,000:1
Response Time 12ms(GtG)
SmartResponse 4ms(GtG)
Optimum Resolution
VGA: 1920 x 1080 @ 60Hz
DVI-Dual Link: 2560 x 1440 @ 60Hz
HDMI: 2560 x 1440 @ 60Hz
DisplayPort: 2560 x 1440 @ 60Hz
MHL: 1920 x 1080 @ 60Hz
Viewing Angle 178°(H)/178°(V)@C/R>10(Typ)
Picture Enhancement SmartImage
Display Colors 1.07B(10bits)
Vertical Refresh Rate
56-76Hz(VGA)
50-76Hz(DVI)
23-76Hz(HDMI/MHL/DisplayPort)
Horizontal Frequency 30-99KHz(VGA/DVI)
15-99KHz(HDMI/MHL/DisplayPort)
sRGB YES
Brightness uniformity 93% - 105%
DeltaE(typ.) 3 for 6500K
Connectivity
Signal Input DVI-DualLink(Digital),VGA(Analog),DisplayPort,MHL-HDMI
USB USB3.0x2(1forUSBfastcharger)/USB2.0x2
Input Signal Separate Sync, Sync on Green
Audio In/Out PC audio-in,headphone out
Convenience
Built-in speaker 3 W x 2
Multi View PIP/PBP mode, 2×devices
User Convenience
OSD Languages
English, German, Spanish, Greek, French, Italian, Hungarian, Dutch,
Portuguese, Brasil Portuguese, Polish, Russian, Swedish, Finnish,
Turkish,Czech,Ukranian,SimpliedChinese,TraditionalChinese,
Japanese, Korean
Other Convenience VESAmount(100×100mm),KensingtonLock
Plug & Play Compatibility DDC/CI, sRGB,Windows 8.1/8/7/Mac OSX

17
4. Technical Specications
Stand
Tilt -5 / +20 degree
Swivel -170 / +170 degree
Height adjustment 180mm
Pivot 90 degree
Power
Consumption AC Input Voltage
at 100VAC , 50Hz
AC Input Voltage
at 115VAC , 60Hz
AC Input Voltage
at 230VAC, 50Hz
Normal Operation 62.30W(typ.) 62.10W(typ.) 61.30W(typ.)
Sleep(Standby) <0.5W(typ.) <0.5W(typ.) <0.5W(typ.)
Off <0.3W(typ.) <0.3W(typ.) <0.3W(typ.)
Off(ACswitch) 0W(typ.) 0W(typ.) 0W(typ.)
Heat Dissipation* AC Input Voltage
at 100VAC , 50Hz
AC Input Voltage
at 115VAC , 60Hz
AC Input Voltage
at 230VAC , 50Hz
Normal Operation 211.82 BTU/hr
(typ.)
211.14 BTU/hr
(typ.)
208.42 BTU/hr
(typ.)
Sleep(Standby) <1.71BTU/hr(typ.) <1.71BTU/hr(typ.) <1.71BTU/hr(typ.)
Off <1.02BTU/hr(typ.) <1.02BTU/hr(typ.) <1.02BTU/hr(typ.)
Off(ACswitch) 0BTU/hr(typ.) 0BTU/hr(typ.) 0BTU/hr(typ.)
OnMode(ECOmode) 31.5W(typ.)
Power LED indicator Onmode:White,Standby/Sleepmode:White(blinking)
Power Supply Built-in, 100-240V AC, 50-60Hz
Dimensions
Productwithstand(WxHxD) 742 x 657 x 270 mm
Product without stand
(WxHxD) 742 x 438 x 61 mm
Product without packaging
(WxHxD) 526 x 224 x 970 mm
Weight
Product with stand 10.76 kg
Product without stand 7.8 kg
Product with packaging 14.98 kg
Operating Condition
Temperature range (operation) 0°C to 40 °C
Relative humidity (operation) 20% to 80%
Atmospheric pressure
(operation) 700 to 1060hPa
Temperature range
(Non-operation) -20°C to 60°C
Relative humidity
(Non-operation) 10% to 90%
Atmospheric pressure
(Non-operation) 500 to 1060hPa

18
4. Technical Specications
Environmental and energy
ROHS YES
EPEAT Gold (www.epeat.net)
Packaging 100% recyclable
SpecicSubstances 100% PVC BFR free housing
EnergyStar YES
Compliance and standards
Regulatory Approvals
BDM3270QP: CE Mark, FCC Class B, SEMKO, cETLus, CU-EAC,
TCO Edge, EPA, PSB,WEEE, CCC, CECP, PSE, KC, BSMI,VCCI
BDM3270QP2: CE Mark, FCC Class B, SEMKO, cETLus, CU-
EAC, PSB,WEEE, CCC, CECP, PSE, KC, BSMI,VCCI
Cabinet
Color Black
Finish Texture
Note
1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net
for registration status in your country.
2. This data is subject to change without notice. Go to www.philips.com/support to download the
latestversionofleaet.
3. SmartresponsetimeistheoptimumvaluefromeitherGtGorGtG(BW)tests.