Brother BAS-610 Series User manual

AUTOMATIC LOCK STITCH POCKET WELT SEWER
(FOR FLAP ATTACHMENT)
AUTOMATIC LOCK STITCH SLANT POCKET WELT SEWER
(fOR FLAP ATTACHMENT)
---"---- ------ ---____J BAS-61 0 L--1 _
BAS-611
INSTRUCT! ON MANUAL
BAS-612
From the library of: Superior Sewing Machine & Supply LLC

CONTENTS
SPECIFICATIONS ............................................................................................................ 1
CONTROL PANEL ........................................................................................................... 2
INSTALLATION ................................................................................................................. 6
1. Setting-up the table ..................................................................................................... 6
2. Connecting the treadle ................................................................................................ 6
3. Fitting the spool stand ................................................................................................ 6
4. Fitting the material holder ........................................................................................... 6
5. Adjusting the air pressure ........................................................................................... 7
LUBRICATION ................................................................................................................... 7
<Standard lubrication> ...................................................................................................... 7
<Oiling> ................................................................................................................................ 8
CORRECT OPERATION ............................................................................................... 9
<Winding the bobbin thread > ........................................................................................... 9
<Threading the needle threads> ...................................................................................... 1
o
<Threading the bobbin thread> ........................................................................................ 12
< Holding the needle threads and the bobbin threads> ................................................ 13
TREADLE AND START SWITCH ............................................................................... 14
<Treadle operation> ........................................................................................................... 14
<Setting the material > ........................................................................................................ 15
MARKtNG LIGHT ADJUSTMENT.............................................................................. 16
PROGRAMMING (Inputting a Standard Sewing Program) ........................................ 17
PROGRAMMING (Inputting a Flap Sewing Program) ................................................ 18
PROGRAMMING (Inputting a Cycle Sewing Program) .............................................. 20
<Checking the sewing cycle> ........................-................................................................... 21
PROGRAMMING (Inputting an Angled Sewing Program) .......................................... 22
PROGRAM CHECKING ................................................................................................. 24
SEWING ............................................................................................................................... 25
<Setting the bobbin counter> ........................................................................................... 26
<Setting the piece counter> .............................................................................................. 26
< Resetting the piece counter> ......................................................................................... 26
<Adjusting the stitch tension> .......................................................................................... 27
CENTER KNIFE POSITION ADJUSTMENT ......................................................... 28
CORNER KNIFE POSITION ADJUSTMENT......................................................... 29
FLAP SENSOR SENSITIVITY ADJUSTMENT (BAS-611 ,BAS-612) .................. 30
<Adjusting the flap sensor sensitivity> ............................................................................ 30
<Sensitivity adjustments> ................................................................................................. 31
From the library of: Superior Sewing Machine & Supply LLC

TROUBLE ........................................................................................................................... . 32
<UPPER THREAD BREAKAGE Indicator Illuminating> ................................................. 32
<BOBBIN EMPTY Indicator illuminating> ..................................................................... ..
32
<PROGRAMMING ERROR Indicator Illuminating> ...................................................... ..
33
<EMERGENCY STOP operation> .................................................................................... 33
STACKER OPERATION DURING CYCLE SEWING ......................................... . 34
STANDARD ADJUSTMENTS (Machine Head) ......................................................... 35
< Fitting a needle> ............................................................................................................... 35
<Adjusting the upper and lower shaft timing> ............................................................. ..
35
<Adjusting the needle and rotary hook timing> ........................................................... ..
35
[Clearance between the needle and rotary hook point] ...................................... ..
35
[Clearance between the rotary hook and needle plate] ......................................... 36 !
[Needle bar lift stroke and· needle bar height] ......................................................... 36
[Clearance between the rotary hook and bobbin case opener] ........................... 36
CARRIAGE FEED ADJUSTMENTS ......................................................................... . 37
<Parallelism adjustment ofthe needle and carriage feed> .......................................... 37
<Carriage feed angle adjustment> ................................................................................... 37
<Carriage feed height adjustment> ................................................................................. 38
<Folding plate position adjustment> ............................................................................... 38
<Binder position adjustment> .......................................................................................... ..
39
KNIFE REPLACEMENT ............................................................................................... ..
40
< Corner knife replacement> ........................................................................................... ..
40
< Needle thread knife replacement> .................................................................................
42
< Bobbin thread knife replacement> .............................................................................. ..
43
< Center knife replacement> ............................................................................................ ..
44
< Fixed knife replacement> .............................................................................................. ..
44
PARTS REPLACEMENT FOR SINGLE WELTING ............................................ .
45
<When changing from double welting to single welting> .............................................
45
MAIN CIRCUIT BOARD DIP SWITCHES .............................................................. . 46
WHEN CHANGING THE TREADLE OPERATION TO
TIMER SWITCH CONTROL ....................................................................................... ..
48
PROGRAMING THE CARRIAGE FEED RESETTIMER .................................. . 50
MEMORY INITIALIZATION ........................................................................................ ..
51
ERROR CODES ............................................................................................................... . 52
TROUBLE-SHOOTING ................................................................................................. . 53
From the library of: Superior Sewing Machine & Supply LLC

SPECIFICATIONS
Model 151-610 I 151 -611 151-612
Machine head Automatic
lock stitch pocket welt sewer Automatic lock stitch slant
(for flap attachment) pocket welt sewer
(for flap attachment)
Sewing speed 2,500 sp
(variable to 2,200 spm by DIP switch setting)
Flap sewing Not available I Available
Slant-welting
Not available Available
Needle
Mtx 190 #16 (#16- #18)
Needle Gauge size Standard 10
mm (8, 1 2, 14, 18, 20 mm)
Seam length Gauge size 14
mm or less : 28 to 190 mm
36 to 190 mm
(Pocket size) 16
mm or more :
36 to 190 mm
Flap sewing :
80 to 180 mm
Stitch length
Lock stitch Standard at 2
mm (variable from 1.8 mm to 3.2 mm)
Backstitch C Condensed : Standard at 1.0 mm (variable from 0.4 mm to 1.4mm)
Back-tack : Standard at 2.0
mm (variable from 0.8 mm to 2.0 mm)
(Variable by dip sw it ch setting)
Power supply 3-phase 200V, 50/60Hz, 500W (Utilizing
two of the 3-phase lines)
Dimensions 820
mm W x 1,300 mm D x 1,155 mm H
- 1-
From the library of: Superior Sewing Machine & Supply LLC

CONTROL PANEL [1] BAS-610, -611
• ijiiU)tt.liiii
• iftf.J~!It · 1M
• PROGRAM
• KHFE CIIAHGE
& CYClE PGM .
EMERGENCY STOP
0 IMODE selector I
Use to select the operating mode: AUTOMATIC, MANUAL, PROGRAM or KNIFE CHANGE 6 CYCLE
PGM
8 IEMERGENCY STOP II IBOBBIN COUNTER SET Ipush-button switch
Press to effect an emergency stop or for setting the bobb in counter (see page 26).
8 IPROGRAMMING NUMBER -SELECT I push-button selector
Press to change the program number. The numberadvances one each time the selector is pressed
(1 --. 2--. 3--. 4--. 5) (see page 17).
0 ICYCLE PGM - SET Ipush-button switch
Press to effect a cycle program (see page 20).
0 ICYCLE PGM- CLEAR Ipush-button switch
Press to clear a cycle program (see page 20).
0 0 0 !SEAM LENGTH/BOBBIN COUNTER I push-button setter (numeric display)
0 x 1 oo (0, 1, F:flap)
0 x 10 (0 to 9, - )
0 x 1 (0 to 9, =:J :right flap, c :left flap)
See page 18
for F- C and F- =:J displays.
0 IBOBBIN COUNTER -SET I push-button swit ch
Press to set th e bobbin counter (see page 26).
Also press this switch to correct the corner knife position (see page 29).
-2 -
From the library of: Superior Sewing Machine & Supply LLC

~I
~,
CD I BOBBIN COUNTER - SELECT I push-button selector
Press to select the bobbin counter: No.1. No.2 or No.3 (see page 26).
The· bobbin counter selection advances In the order 1 -. 2 -. 3.
CD I CORNER KNIFE I switch
Set to ON to use the center knife. (The comer knife will not function when the CORNER KNIFE switch
is
set to ON with the CENTER KNIFE switch set to OFF.)
The knife will rise during corner knife replacement even If the switch Is set to OFF.
C1 I CENTER KNIFE Iswitch
Set to ON to use the center knife.
I) I STACKER I switch
Set to ON to use the stacker.
e I CARRIAGE FEED I forward/backward switch
Set to ADVANCE to move the carriage feed away from the operator.
Use simultaneously with
G) I THREAD TRIMMER I switch
Use In either MANUAL or AUTOMATIC mode when the carriage feed Is atthe thread trimming position.
Set to UPPER tolower the needle thread knife unit and then start to raise it In the neutral position to
cut
and holdthe needle threads.
Set to LOWER to release the bobbin threads from the bobbin thread knives and then cut and hold the
bobbin threads
at the neutral position.
To displaythe number ofwork pieces, set to UPPER in the AUTOMATIC mode when the carriage feed
Is at the home position.
8 I PROGRAMMING NUMBER I Indicator
When the Indicator Is flashing, the program number can be changed by pressing the SELECT selector.
e IProgram number I indicators
The flashing Indicator shows the program to be run.
In the AUTOMATIC MODE of cycle sewing, a flashing Indicator shows the sewing program to be run
and a steady Indicator shows the program to be run after that.
[Example
1] If the cycle sewing Is programmed as 1 -. 2 -. 3, the Indicator are:
1 2 3 4 5
Flashing Steady Steady Off Off
Ifthe
PROGRAMMING NUMBER - SELECT selector is pressed then or if program 2 has
been run, the Indicators are:
1 2 3 4 5
Steady Flashing Steady Off Off
CD I SEAM LENGTH I/ '""'I 8...,..0:'"1018,......B"''T"INT'""':C....,OIIri'O ...... N ....... T ..... E ...... R ...... S~ETI;;r'll/ I CORNER KNIFE POSITIONAL CORRECTION I
display
When the SEAM LENGTH Indicator Illuminates, the display shows the seam length (unit: mm) orthe
flap selection.
When the BOBBIN COUNTER SET Indicator Illuminates, the display shows the bobbin thread amount
(unit: piece).
The setting can be changed using setters • , 0 and e when the display Is flashing.
8 I BOBBIN cOUNTER I display
The display shows the remainder on the bobbin counter with the Illuminating number Indicator No. 1,
No.2 orNo.3 (20).
fl I BOBBIN COUNTER NUMBER I Indicators
The Indicator for the bobbin counter number selected by BOBBIN COUNTER - SELECT CO
Illuminates.
fD I POWER I Indicator
The indicator illuminates when the power switch Is set to ON.
-3-
From the library of: Superior Sewing Machine & Supply LLC

CONTROL PANEL [2] BAS-612
r-
·Elll!lll
• PIIOGIWI
• IOIHOWU
& ClO..E PGII .
STOP
©~T!RAI)
©i1()881jElFTY
~
~ ~ ~
©=-'
rm rm rm
0 Pattern SELECT selector
Select one slant pocket sewing pattern from the nin e.
f)) Sewing pattern display and SEAM LENGTH SIDE, R/L indicators
The sewing pattern program set with the selector is displayed on the LEDs.
Pattern 1 2 3 4 ;)
6 7 8 9
r :JJ r :JJ r ::n
r ::n
r :JJ r :JJ r :JJ r :JJ r :JJ
00
0 0 0 0 0 0
00 00
0 0 0 0
00
1(/)1
1(/)0 0(/)1 1(/) 0 0(/)1 1(/)1 1(/)1 1(/)0
0(/)1
LED display I I I I I I I I I I I I I I I I I I
I I I I I I I I I I I I I I I I I I
I I I I I I I I I I I I I I I I I I
lml
Om I l
mO lml
lml lmO OmI
lmO
Om I
L R l R L R L R L R L R
f-+
L R H -
m
: rl
h I
~ ~
h : : : l
ri
~
l
I I
Sewing I I I I I I I I I I I I I I I I
I I I
S =sta rt w·
I I I I I I I I I I I I I I
I I I e I I e I I e I Ie I I e I Ie I I e I le
E= end I I I I I I I I I I I I I I I I I
I=length I I I I I I I I I I I I I I I I I
overall I lr I I
14
I I I I
IY rl
IY
f-1l
I
·-
LL
g) S-side deviation amount display
The LED display shows the deviation amount on the sewing-start side.
G) S-side deviation amount setter
Set a deviation amount of 19 mm or le ss.
~ E-slde deviation amount display
The LED display shows the deviation amount on the sewing-end side.
f) E-side deviation amount setter
Set a deviation amount of 19 mm or less.
-4-
From the library of: Superior Sewing Machine & Supply LLC

t:p;.t..:Ziiliii
-- CENTER K.
BAS - 610
75•;/ 1 ~:/if -
-----
FLAP SENSOR
LEFT
Ill ~
Rl ~@)
~T I l l @)
Il l ~
t:p;.t..:Zliliii
------- -
CENTER K.
,...;;.;n:-r- ;;-- - - ~
I l.l=;':!'=~
~ .. '1:::::::::::::~ :------ ~
>.=-=-<
iJ---~-,
BAS-61 1
BAS-612
fJ) , f)) ICENTER K. (knife) I positional
correction counters
The Scounter shows thestart-side correction
and the E counter shows the end-side
correction.
0 : The center knife
moves
to the extreme
outer position.
9 : The center knife
moves
to the extreme
inner position.
BAS-611 and BAS-612 only
~: -_- ~ _- ~ - ~ ~~ ~ ~~ -_- - - - ~
-- ....._-
0 9 9 0
ClD I FLAP SENSOR -LEFT I indicator
The indicator illuminates when the left flap
sensor detects the material.
G) I FLAP SENSOR- RIGHT I indicator
The indicator illuminates when the right flap
sensor detects the material.
~ IFLAP SENSOR - LEFT I sensitivity control
G) IFLAP SENSOR -RIGHT I sensitivity control
-5-
Seam length display
~ SEAM ~ B~N
LENGTH COUNTER SET ... IIOIIBIN COUNTER
[ I 1-1
,-,
( )
, ,_, ,_,
M/M
s?. ~E
SET
SEl£CT
DODD
o ~~~
N0 .1 N0 .2 N0 .3
Flap display
~ SEAM ~ BOBBIN
LENGTH COUNTER SET ... BOBBIN COUNTEJI
[ :-
- - J ru ,-, .-~
I_ M/ M f !_f l_t
s> ~E
SET
SELECT
DODD
D ~~~
N0.1 N0 .2 N0 .3
Bobbin counter-bobbin counter set
display
~ SEAM ~ BOBBIN
LENGTH CO UNTER SET ... BOBBIN COUNTER
( lM/ M [ I C 1-1 l
I _I 1_1
S ;? _____ <:;: E
SET
SELECT
DODD
D ~~ ~
N0 .1 N0 .2 N0 .3
Work piece counter display
~ SEAM ~ BOBBIN
LENGTH COUNTER SET ... BOBB IN COUNTER
( '7 ~-: I : lM/M (
,-: 'J ·: )
S ?: __ _ ~ E SET
SELECT ~ ~ ~
DOD D
101 N0 .1 N0.2 N0 .3
From the library of: Superior Sewing Machine & Supply LLC

INSTALLATION [1]
1. Setting-up the table
2. Connecting thetreadle
3. Fitting the spool stand
• Fit spool stand 0 onto bracket 8 and
secure with screw 0 .
-6-
• Set the machine table level.
Loosen nut 0 and adjustthe height byturning
caster 8 .
• Lockthe casters sothatthetablewill not move.
Lower lever 8
to lock caster 8 .
T ~ move the table again, lowerlever 8 .
• Remover three screws 0 and open side
panel 8 .
Plug 12P connector 8 fortreadle 8 Intothe
connector port on the side panel.
4. Fitting the material holder
• Fit material holder 0 onto stud 8 and
secure with screw 0 .
I
From the library of: Superior Sewing Machine & Supply LLC

'\
5. Adjusting the air pressure
LUBRICATION [1]
• Use Brother-specHied machine oil (High White #70).
<Standard lubrication>
1. The standard operating air pressure Is
5 kg/cm2.
Adjust the airpressure byturning handle 0.
2. Ifwater collects In bottle 8 closeaircock •
and then turn drain cock 0 slowly in the
arrowed direction
to drain the water.
*
Be sure toclose drain cock 0 afterletting
the water out.
1. Filling the arm top oil tank 2. Adjusting the rotary hook lubrication
• Pour in the oil through oil cap 0 until its level
reaches the upperline on oil gauge
window8
• Replenish the oil when its level reaches the
lower line.
-7-
~
More lubricant ~ Less lubricant
*To prevent extremely high oil consumption,
be
careful not to loosen lubrication
adjustment screws • for the rotary hook
too much.
Slide the carriage feed while referring to
page
10, remove the slide plate, and tiltthe
machine head.
From the library of: Superior Sewing Machine & Supply LLC

Lubrication [2]
<Oiling>
Before initial use of the machine or after a long 'period of no use, be sure to add a drop or two of oil at
the arrowed points.
m
-8-
From the library of: Superior Sewing Machine & Supply LLC

CORRECT OPERATION [1]
<Winding the bobbin thread>
1. Set power switch 0 to ON.
2. Place empty bobbin 8 onto bobbin winder shaft 0
3. Thread the thread from the spool stand as illustrated and wind the thread end around bobbin 8 for
five
to sixturns.
4. Move lever 8 In the arrowed direction.
The winder will start automaticallyand bobbin winder shaft 0 will revolve
to wind the thread on the
bobbin.
5. On completion of winding the maximum amount ofthread, the lever returns automatically and bobbin
winder shaft 0 will stop revolving.
6. Toadjustthe maximum thread amountfor bobbin 8, loosen screw 8 and movelever 8 to the right
or left.
7. Remove bobbin 8 from bobbin winder shaft 0 and cut the thread by winding It around thread
holder 0.
Towind another bobbin, take the thread end from thread holder 0 and wind it around the new one.
-9-
From the library of: Superior Sewing Machine & Supply LLC

CORRECT OPERATION [2]
<Threading the needle thread>
• Threading is easier when the carriage feed is advanced as this allows more space around the needle.
Before threading
{To advance the carriage feed}
1. Set power switch 0 to ON (an alarm will sound once).
The EMERGENCY STOP indicator will flash.
2. Press EMERGENCY STOP switch f) (an alarm will sound twice).
Carriage feed 8 will move to the home position.
3. Set MODE selector 8 to MANUAL
4. Set CARRIAGE FEED switch e to FORWARD to advance the carriage feed.
* To fast-advance the carriage feed tothe thread trimming position, set CARRIAGE FEED switch e to
ADVANCE with THREAD TRIMMER switch 0 set to UPPER.
MODE
• PROGRAM
• KNIFE CHANGE
ICYCLEPGM.
EMERGENCY STOP
ol /
II
BOBBIN COUNTER SET
CARRIAGE THREAD
FEED TRIMMER
-10-
From the library of: Superior Sewing Machine & Supply LLC

[Threading the needle threads]
• Thread the needle threads.
-11-
From the library of: Superior Sewing Machine & Supply LLC

CORRECT OPERATION [3]
<Threading the bobbin thread>
[To remove the bobbin cases]
1. Open slide plates A 0 and L 8 .
2. Hold the corners of bobbin cases 8 and remove them.
[To thread a bobbin case]
BAS-610 and BAS-611
50mm
BAS-612
-12-
1. Insert a bobbin into the bobbin case.
2. Thread the thread through notch 0 and
then under tension spring 8 .
3. Pull approximately 50 mm of thread through
the hole at the
end oftension spring 8 .
4. Insert the bobbin case Into the rotary hook.
1. Insert bobbin 0 into bobbin case 8 .
2. Thread the thread through notch A and then
undertension spring 0 .
3. Thread the thread through notches B and C
and then hang it on bobbin-thread sag
prevention spring 8 .
4. Pull approximately 50 mm of thread through
hole
t).
From the library of: Superior Sewing Machine & Supply LLC

<Holdingthe needle threads and the bobbin threads>
• Insert the bobbin case (bobbin) into the rotary hook and close the handle.
1. Hold the needle thread by hand, and turn the
pulley by hand to bring the bobbin thread up.
2. Set THREAD TRIMMER switch 0 to UPPER
to lowerthe needle thread trimmer knife.
Bobbin thread
Note.: Be careful to keep your hands and other
THREAD
TRIMMER
0
Needle
thread
{To return the carriage feed}
1. Return the slide plates.
articles away from the knife when itlowers.
3. Thread the two needle threads over the
needle thread trimmer knife.
4. Return THREAD TRIMMER switch 0 to raise
the needle thread trimmer knife and hold the
needle threads.
5. Set THREAD TRIMMER switch 0 to LOWER
to turn the bobbin thread knife as illustrated.
6. Insert the threads into the grooves In the
needle plate and reset
THREAD TRIMMER
switch 8 to cut and hold the bobbinthreads
with the bobbin thread knives.
THREAD
TRIMMER
I
0
2. Set CARRIAGE FEED switch 8 to BACKWARD to return the carriage feed.
* To fast-return the carriage feed to the home position, set MODE selector 8 to any position but
MANUAL.
CARRIAGE
FEED
-13-
.../
MODE
~ •U•Nil
• lt'll·!lll!·!·
' • PROGRAM
• KNIFE CHANGE
&CYCL!PGM.
From the library of: Superior Sewing Machine & Supply LLC

TREADLE AND START SWITCH
• When running a flap program, the machine will not operate on pressing the start switch unless the flap
presser lowers.
• For standard sewing, the machine will operate on pressing the start switch after the folding plate has
operated.
• Set the MODE selector·either to AUTOMATIC or to MANUAL.
<Treadle operation>
1. Press treadle 0 backwards to raise padding cloth presserfoot springs R 8 and L 8 .
2. Release treadle 0 to lower padding cloth presser foot springs R 8 and L 8 .
3. Press treadle 0 forward to position 0 to lower carriage feed arm L 8 .
4. Press treadle 0 forward to position 8 to lower carriage feed arm R e .
5. Press treadle 0 forward to position 8 to lower binder 8 and operate thefolding plate.
* The folding plate will start to operate 0.25 to 0.35 seconds after binder 8 lowers.
6. Press treadle 0 forward to position 8 to lower flap presser L 0 .
7. Press treadle 0 forward to position e to lower flap presser R 0 .
8. Press START switch 8 to operate the carriage feed.
* Ifthe MODE selector is set to MANUAL, the carriage feed will operate without actual sewing.
* The sequence of carriage feed and flap presseroperations (steps 3, 4, 6 and 7above) can bechanged
by dip switch setting (see page 46).
C BA S-610
I8 A s -611 • 612 I
-14-
fr
'
..
It
.......
From the library of: Superior Sewing Machine & Supply LLC

<Setting the material >
• When running a flap program, the machine will not operate on pressing the start switch unless the flap
presser lowers.
• For standard sewing, the machine will operate on pressing the start switch after the folding plate has
operated.
1. Press treadle 0 backward to raise padding cloth presser foot springs R f) and L 8 .
2. Position the padding.
3. Release treadle 0 to lower padding cloth presser foot springs R f) and L 8 and secure the
padding.
* If the material is lined with padding, steps 0 to 8 above may be skipped.
4. Position the bodice.
5. Press treadle 0 forward to position 0 to lower carriage feed arm L 8 .
6. Press treadle 0 forward to position f) to lower carriage feed arm R 8 .
7. Position the welting material.
8. Press treadle 0 forward to position 8 to lower binder 0 and operate the folding plate.
(The welting material will be folded when lowered binder 0 holds the material.)
* The folding plate will start to operate 0.25 to 0.35 seconds after binder 0 lowers.
9. Select either right flap sewing or left.
1 o. Press treadle 0 forward to position 8 to lowerflap presser L 8 .
11. Press treadle 0 forward to position 8 to lower flap presser R 0 .
12. This completes the material setting.
1. Padding presser
2. Bodice
3. Welting material
4. Flap
~lngplate
-15-
From the library of: Superior Sewing Machine & Supply LLC

MARKING LIGHT ADJUSTMENT
Adjust the focus before positioning the material.
<Adjusting the focus>
1. Set power switch 0 to ON to turn on the marking lights.
2. Loosen screw 8 and mov~ lens hood 0 up or down until the II+ II markis projected sharply onthe
material.
* Adjust the sewing start position back and forth with bolts 8 .
* A third marking light Is available as an option (808367-000).
-16-
From the library of: Superior Sewing Machine & Supply LLC

PROGRAMMING (Inputting a Standard Sewing Program)
• Set the MODE selector to PROGRAM. The PROGRAMMING NUMBER and SEAM LENGTH indicators
will flash.
• Flap sewing is selected if F- =::J or F- C is displayed.
<Inputting a standard sewing program>
To change the seam length of programming number 1 from
100 to 125:
1. Set MODE selector 0 to PROGRAM.
2. Press SELECT selector 8 and illuminate program number indicator
11
1
11
•
3. Inputthe seam length of the standard sewing program.
Press setters 8 and change the seam length display from 1
00 to 125.
4. Set MODE selector 0 to any position but PROGRAM.
* The modified program will be stored when the MODE selector Is moved. The programs will remain
unmodified ifthe power switch is set to
OFF without moving the selector.
5. Set MODE selector 0 to AUTOMATIC to sew.
Program
..
I.,..._.._. 125~-1
MODE
@PROGRAMMING
.NUMBER
@SEAM (Q)BOBBIN
LENGTH COUNTER SET
•IJIII•ItU!III
1 2 3 4 5
,-, ,-,
I
·•M.mw•
©@@©©
,
,_, ,_,
M/M
rw·~
SELECT [EfDJ
S >-_ ___ ~ E
SET
• KHIFE CHANGE
DOD
D
&CYCLE PGM.
CYCLE PGM.
y
0 I
MODE @PROGRAMMING
NUMBER
@SEAM (Q)BOBBIN
LENGTH COUNTER SET
1. flllloVflil
1 2 3 4 5 I
-, ,-
@©@©@
, c ='
• lt~!·!lll!·!·
M/M
• PROGRAM
DUC1JOJ
S >-----~ E
SET
• KNIFE CHANGE
DOD
D
&CYCLEPGM.
-17-
From the library of: Superior Sewing Machine & Supply LLC