Brother BE-0901E PC Quick start guide

1
Creating Version Upgrade Disk
This document explains how to create the upgrade version disks using the upgrade file
or files which are downloaded from the website or sent by e-mail.
Downloading the file from website or email
1. Create a temporary directory on your computer (i.e., C: \TEMP) to save a self-
extracting file or individual files on the hard disk.
2. Start downloading the file and or files.
3. Designate the directory created in step 1 above to save the downloaded file and or
files.
4. If you downloaded individual files you may skip this step. Double-click the self-
extracting file (*.exe) that you downloaded to extract it.
Creating the installation disk
When the file is extracted according to “Downloading the file” above, the following three
files are created.
# Of
Files Disk Label
File name
(BES-1216AC)
(BES-1201AC)
File name
(BES-916AC)
(BES-901AC)
File name
(BES-116AC)
(BES-101AC)
1 SETUP DISK 1201BS -***.bup 901BS -***.bup 101BS -***.bup
2 INSTALL
DISK1 1201BM -***.bup 901BM -***.bup 101BM -***.bup
3 INSTALL
DISK2 1201BP -***.bup 901BP -***.bup 101BP -***.bup
(***varies according to the version of the software downloaded.)
1. Prepare three empty 1.4MB floppy disks.
2. Copy each file to a separate floppy disk.
3. Label each disk accordingly.
B
BE ES S- -9 91 16 6, ,9 90 01 1, ,1 12 21 16 6, ,1 12 20 01 1
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
Revised 1/10/05