Brother KE-434C User manual

KE-434C, KE-435C 1/11
2003.1
KE-434C
Electronic Lockstitch Pattern Tacker
KE-435C
Electronic Lockstitch Pattern Tacker
with Stepping Foot
KE-434C-X KE-435C
Specifications
KE434C
Electronic lockstitch pattern tacker
KE435C
Electronic lockstitch pattern tacker
with stepping foot
Stitch formation Single needle lock stitch
Max. sewing speed 2,500 rpm (Pitch: 3mm)
Maximum pattern size 100 x 60 mm max.
Feed mechanism R-θIntermittent feed mechanism (pulse-motor driven mechanism)
Stitch length 0.1 – 10.0 mm
No. of stitches Variable
Max. stitch number 20,000 stitches (including 10,000 stitches which can be added.)
Work clamp lifter Solenoid type or pneumatic type
Work clamp height
17 mm max. (for solenoid)
25 mm max. (for pneumatic)
(Max. 17 mm for inner clamping device)
Hook Shuttle hook (shuttle hook 2, optional)
Wiper device Standard equipment
Thread trimmer device Standard equipment
Thread take-up device Standard equipment
Stepping foot lift amount 18 mm
Stepping foot stroke 0 mm, 3 – 8 mm
Safety device Built-in stopping mechanism
Data storage method P-ROM (Any sewing pattern can be added using PS-3000.)
No. of user programs 16
No. of cycle programs 4
No. of stored data Up to 100 patterns can be added.
Total number of stitches of stored data which can be added is within 10,000.
Motor Three-phase 400W induction motor
Weights Machine head: 56 kg Operation panel: 0.6 kg Control box: 9 – 19 kg (depending on destination)
Power source
Single-phase 110, 220 – 230, 240 V
3-phase 220 – 230, 380, 400 V
Maximum electric power consumption; 600 VA
Main use
Patterns up to a maximum size of 100 mm x 60 mm can be sewn.
For plain stitching of small articles, curtain darts, etc.
Two-stage work clamp, light work clamp and inner clamping device can be used (for pneumatic).
For attaching items, sewing labels, etc.
*If you want to sew a pattern, you can create your original pattern using the PS-3000.
Consult with your local Brother Sales Office for details.
1 Medium-weight materials
2 Heavy-weight materials

KE-434C, KE-435C 2/11
2003.1
Optional device
Solenoid thread wiper (KE-434C)

KE-434C, KE-435C 3/11
2003.1
Optional device
Solenoid thread wiper (KE-434C)
Ref. No. Part name Part code Q’ty
20 Sol. Type thread wiper assy S49615-009 1
20-1 TR-wiper connecting rod assy S41656-001 1
20-2 Thread wiper arm assy S44600-001 1
20-3 Shoulder screw, SM3.57 153112-001 1
20-4 Nut, 2 SM3.57 021670-202 1
20-5 Solenoid box assy S49616-009 1
20-5-1 Thread wiper solenoid assy S49619-001 1
20-5-1-1 Plunger rubber S41204-050 1
20-5-2 Screw, pan M3 × 6 062300-612 4
20-5-3 Washer, plain S41205-001 1
20-5-4 Thread wiper spring S41206-001 1
20-5-5 Plunger pin S25456-001 2
20-5-6 W-solenoid setting plate S42017-109 1
20-5-7 EM-lock switch & harness assy S49482-000 1
20-5-7-1 Switch :AVS311N S32335-000 1
20-5-7-2 EM-switch harness S49466-000 1
20-5-8 EM-switch spacer, 3 S37057-001 1
20-5-9 Wiper solenoid cover S42018-109 1
20-5-10 Screw, truss M4 × 6 008400-604 2
20-5-11 Solenoid cover lid, E S37806-109 1
20-5-12 Screw, truss M4 × 6 008400-604 2
20-5-13 Washer, plain 13 115007-001 1
20-6 Spacer rubber S41207-000 1
20-7 Plunger pin S25456-001 1
20-8 Bolt, socket M4 × 6 018400-632 2
20-9 Washer 100645-003 2
20-10 Tension release rod, DW S41657-001 1
20-11 Screw, flat M3.5 × 6 061350-616 1
20-12 Screw, pan SM4.37-40 × 8 062680-812 2
20-13 Thread wiper, A 156206-001 1
20-14 Connector, ;VHR-5N S49947-000 1
20-15 Screw, bind SM3.57-40 × 6 060670-612 3
20-16 Cord holder, 7N 149287-000 3
20-17 Rubber cap, 15.5 104449-009 1
*This is standard equipped for pneumatic specification.
*This is optional for solenoid specification.

KE-434C, KE-435C 4/11
2003.1
Optional device
Inner clamping device (KE-434C)

KE-434C, KE-435C 5/11
2003.1
Optional device
Inner clamping device (KE-434C)
Ref. No. Part name Part code Q’ty
600 Inner clamp device set S54771-001 1
600-1 Work clamp crank assy, 434E S42007-001 1
600-1-1 Work clamp crank holder, A S12634-009 1
600-1-2 Work clamp crank holder, B S42008-001 1
600-1-3 Reverse cylinder base S42019-001 1
600-1-4 Bolt, socket M3 ×12 018301-236 2
600-1-5 Bolt, socket M3 ×8 018300-836 2
600-1-6 Work clamp crank, LA S05665-001 1
600-1-7 Reverse gear 154235-001 1
600-1-8 Reverse rack 154236-001 1
600-1-9 Washer, plain S3.5 145087-001 1
600-1-10 Set screw, SM3.18 149831-101 1
600-1-11 Work clamp plate holder, L 154237-001 1
600-1-12 Washer 025350-132 1
600-1-13 Screw, SM3.57 – 40 ×5 100242-003 1
600-1-14 Reverse rod S42020-001 1
600-1-15 Reverse cylinder S12639-001 1
600-1-16 Bolt, socket M3 ×35 S12642-009 2
600-1-17 Reverse shaft joint S42021-001 1
600-1-18 Bolt, socket M3 ×8 018300-836 1
600-1-19 Bolt, socket M3 ×8 018300-836 1
600-1-20 Bolt, M5 ×12 017501-216 1
600-1-21 Nut, 2M5 021500-216 1
600-1-22 Half union, ;Q4M5 S18415-101 2
600-2 Outer work clamp S42009-101 1
600-3 Work clamp plate blank, A 154256-101 1
600-4 Screw, flat SM3.18 117291-002 2
600-5 Positioning plate, L 154252-001 1
600-6 Positioning plate, R 154253-001 1
600-7 Screw, pan SM3.57 – 40 x 5 062670-512 4
600-8 Washer, plain L3.5 025350-332 4
600-9 Washer, spring 2 – 3.5 028350-242 4
600-10 Feed plate blank, 434R1 S43459-001 1
600-11 Inner valve assy, 3 S44745-109 1
600-11-1 Valve setting plate, 4-5H S31570-409 1
600-11-2 Air manifold, 3 S44748-001 1
600-11-3 Screw, pan M3 ×25 062302-505 2
600-11-4 Washer, spring 2-3 028030-242 2
600-11-5 Washer, plain M3 025030-232 2
600-11-6 Solenoid valve S43683-001 1
600-11-7 Valve harness assy, X1 S43696-100 1
600-11-7-1 Valve harness S44746-100 1
600-11-7-2 Valve harness, 24V S44750-100 1
600-11-8 Half union, ;Q4M5 S18415-101 2
600-11-9 Regulator assy S45252-000 1
600-11-9-1 Regulator S45253-000 1
600-11-9-2 Joint, 3109 – 4 - 10 S45254-000 2
600-11-10 Screw, pan M4 ×40 062404-005 2
600-12 Air tube, 4L = 300 S28741-000 1
600-13 Air tube, RV-3A L = 1600 S53118-001 1
600-14 Air tube, RV-3B L = 1600 S53118-002 1
600-15 Tying band, 1.9 ×80 228475-000 3

KE-434C, KE-435C 6/11
2003.1
Optional device
Inner clamping device (KE-435C)

KE-434C, KE-435C 7/11
2003.1
Optional device
Inner clamping device (KE-435C)
Ref. No. Part name Part code Q’ty
600 Inner clamp device set SA0709-001 1
600-1 Work clamp crank assy, 434E S42007-001 1
600-1-1 Work clamp crank holder, A S12634-009 1
600-1-2 Work clamp crank holder, B S42008-001 1
600-1-3 Reverse cylinder base S42019-001 1
600-1-4 Bolt, socket M3 ×12 018301-236 2
600-1-5 Bolt, socket M3 ×8 018300-836 2
600-1-6 Work clamp crank, LA S05665-001 1
600-1-7 Reverse gear 154235-001 1
600-1-8 Reverse rack 154236-001 1
600-1-9 Washer 145087-001 1
600-1-10 Set screw, SM3.18 149831-101 1
600-1-11 Work clamp plate holder, L 154237-001 1
600-1-12 Washer, plain S3.5 025350-132 1
600-1-13 Screw, SM3.57 – 40 ×5 100242-003 1
600-1-14 Reverse rod S42020-001 1
600-1-15 Reverse cylinder S12639-001 1
600-1-16 Bolt, socket M3 ×35 S12642-009 2
600-1-17 Reverse shaft joint S42021-001 1
600-1-18 Bolt, socket M3 ×8 018300-836 1
600-1-19 Bolt, socket M3 ×8 018300-836 1
600-1-20 Bolt, M5 ×12 017501-216 1
600-1-21 Nut, 2M5 021500-216 1
600-1-22 Half union, ;Q4M5 S18415-101 2
600-2 Outer work clamp S42009-101 1
600-3 Work clamp plate blank, A 154256-101 1
600-4 Screw, flat SM3.18 117291-002 2
600-5 Positioning plate, L 154252-001 1
600-6 Positioning plate, R 154253-001 1
600-7 Screw, pan SM3.57 – 40 x 5 062670-512 4
600-8 Washer, plain L3.5 025350-332 4
600-9 Washer, spring 2 – 3.5 028350-242 4
600-10 Feed plate blank, 434R1 S43459-001 1
600-11 Inner valve assy, 4 SA0048-001 1
600-11-1 Valve setting plate, 4-5H S31570-409 1
600-11-2 Air manifold, 4 S44749-001 1
600-11-3 Screw, pan M3 ×25 062302-505 2
600-11-4 Washer, spring 2-3 028030-242 2
600-11-5 Washer, plain M3 025030-232 2
600-11-6 Solenoid valve S43683-001 1
600-11-7 Valve harness assy, X1 S43696-100 1
600-11-7-1 Valve harness S44746-100 1
600-11-7-2 Valve harness, 24V S44750-100 1
600-11-8 Half union, ;Q4M5 S18415-101 2
600-11-9 Regulator assy S45252-000 1
600-11-9-1 Regulator S45253-000 1
600-11-9-2 Joint, 3109 – 4 - 10 S45254-000 2
600-11-10 Screw, pan M4 ×40 062404-005 2
600-12 Air tube, 4L = 300 S28741-000 1
600-13 Air tube, RV-3A L = 1600 S53118-001 1
600-14 Air tube, RV-3B L = 1600 S53118-002 1
600-15 Tying band, 1.9 ×80 228475-000 3

KE-434C, KE-435C 8/11
2003.1
Different parts list
*In the following table, parts marketed ☆are common with the BAS-311F.
KE-434C
434C-1 434C-2 434C-option KE-435C
Spec.
Part name Medium-weight
materials
Heavy-weight
materials
Extra heavy-weight
materials Heavy-weight materials
Needle hole plate (φ2.2)
S49980-001 <FM>
(φ2.6)
S10212-101 <E>
(φ2.6)
S10212-101 <E>
159610-301 <A> 152690-401 <B> 152690-401 <B>
Bobbin case assy
S59221-001 <LC> S59221-001 <LC>
154339-101 <A> 154340-101 <B> 154340-101 <B>
Tension spring
--
154341-001 154341-001
Screw
--
159612-001 <A> 154342-001 <B> 154342-001 <B>
Spring, anti-spin
--
159613-051 154663-001 <B> 159613-051
Bobbin
S44633-001 <LAN> S44633-001 <LAN>
SA1881-001 <A> SA1882-001 <B> SA1882-001 <B>
Shuttle hook assy w/box
☆
SA2173-001 <LF>
☆
SA1890-001 <LG>
☆
SA1890-001 <LG>
Shuttle race body
152682-101 <A> 152686-101 <B> 152686-101 <B>
Tension spring
104525-001 107606-001 S06548-001 <C> 107606-001
Thread take-up spring
145519-001 144588-001 <B> 144588-001 <B>
Needle bar thread guide
S41222-101 <B> 152890-001 <A> S02439-001 <B> ☆
S02438-001 <A>

KE-434C, KE-435C 9/11
2003.1
Different parts list
*In the following table, parts marketed ☆are common with the BAS-311F.
KE-434C
434C-1 434C-2 434C-option KE-435C
Spec.
Part name
Medium-weight
materials
Heavy-weight
materials
Extra heavy-weight
materials
Heavy-weight materials
SA1752-014 <#14>
Needle assy
Inner clamping device
DP x 17 <#14>
SA1645-014
SA1579-019 <#19> ☆
SA1645-025 <#25> SA1579-019 <#19>
DP x 5 <#14>
107415-014
Needle
Inner clamping device
DP x 17 <#14>
145646-014
DP x 17NY <#19>
S37928-019
☆
DP x 17NY <#25>
145646-025
DP x 17NY <#19>
S37928-019
KE-434C
434C-1 434C-2 434C-option KE-435C
Spec.
Part name Blank for medium-
weight materials
Blank for heavy-weight
materials
Blank for inner
clamping device
Blank for heavy-weight
materials
434-1L
S42031-001
434-2L
S42033-001
434E SF-2L
S46545-001
Work clamp blank
434-1R
S42030-001
434-2R
S42032-001
154256-101 <A>
434E SF-2R
S46544-001
Feed plate blank
434-1
S42034-001
434-2
S42035-001
434-R1
S43459-001
434E SF-2
S44942-001

KE-434C, KE-435C 10/11
2003.1
Gauge parts list
The following are provided as optional gauge parts.
Each work clamp pair is used in combination with the feed plate directly below them.
<100 x 60> <48 x 10 x R30> <34 x 5 x R28> <Bar tack “16 x 2”>
R 153493-001 S23377-001 (519) S27836-001 (895) 156085-001 (M)
L 153498-001 S23378-001 (519) S27837-001 (895) 156086-001 (M)
Work clamp,
153503-001 S23379-001 (519) S27838-001 (895) 156087-001 (M)
Feed plate
<Bar tack “20 x 3”> <Bar tack “10 x 2”> <For one-touch work clamp>
R 156082-001 (L) 156088-001 (S) S44940-001 (434E SF)
L 156083-001 (L) 156089-001 (S) S44941-001 (434E SF)
Work clamp,
156084-001 (L) 156090-001 (S) S43990-001 (A) S43991-001 (B) S43992-001 (C)
Plastic work clamp blank
Feed plate A: t = 0.5
B: t = 1.0
C: t = 2.0
Gauge assy, 434E MK2
S54984-001
Home position standard plate
S52100-001
Screw, w/socket SM4.37
S49955-001

KE-434C, KE-435C 11/11
2003.1
Gauge parts list
Needle hole plate
A S10211-001 AF S51449-001 BZ S41013-001 D S29997-001 E S10212-101 ED S30925-001
(For heavy-weight
materials)
F S10213-001 FD S30926-001 FM S49980-001 FZ S59620-001 H S30450-001 L S25127-001
(For medium-weight
materials)
M S34348-001 3
countersink S40217-001