Brother Quattro 6000D User manual

1
ENGLISH
EN
NEW FEATURES OF VERSION 2
The following new features have been added with version 2.
Previews of embroidery patterns can be magnified by 200%.•
Thumbnails of embroidery patterns can be displayed at a larger size.•
An image of the needle position being displayed by the built-in camera or an image of the Settings screen can be saved in the•
BMP format on USB media.
A grid can be displayed to check the needle position in the LCD. This enables easy alignment of the needle position.•
Various improvements in operation and screen displays have been incorporated, making the machine easier to use.•
For details, refer to the following descriptions.
DISPLAYING PATTERNS IN THE
EMBROIDERY EDIT SCREEN
MAGNIFIED BY 200%
In the Embroidery Edit screen, the pattern can be
magnified by 200% within the embroidery display area.
aPress .
→changes to , and the pattern is
magnified by 200%.
bCheck the displayed pattern.
Use→to scroll through the
display in any direction.
cTo display the pattern back to the normal
size (100%), press .
SPECIFYING THE SIZE OF
PATTERN THUMBNAILS
The thumbnails for selecting an embroidery pattern can
be set to be displayed at the normal size or a larger size.
The larger size is 1.5 times the normal size.
The thumbnail size setting can be selected from page 8/8
of the Settings screen.
aPress or to select the desired
thumbnail size.
Note
When thumbnail size setting has been changed the•
pattern selection screen will not immediately reflect the
chosen size. To view the patterns with the new thumbnail
size, return to the category selection screen, and then
select the pattern category again.

2
SAVING A CAMERA IMAGE OR
SETTINGS SCREEN IMAGE TO
USB MEDIA
An image of the needle position being displayed by the
built-in camera or an image of the Settings screen can be
saved as a BMP file.
A maximum of 100 images can be saved on a single USB
media at one time.
aInsert the USB media into the primary
(top) USB port on the right side of the
machine.
Primary (top) USB porta
USB mediab
Note
If two USB medias are inserted simultaneously, the files•
will be saved only on the USB media inserted first.
bDisplay the screen to be saved, and then
save the displayed image.
Note
An image can be captured only of screens containing the•
indicated key / .
To save an image of the needle position displayed by
the built-in camera
Memo
For details about using the built-in camera to display the•
needle position, refer to “Checking the Needle Location
in the Screen” in the machine’s Operation Manual.
Press .
The image file will be saved to the USB media.→
To save an image of the Settings screen
Memo
For details about displaying the Settings screen, refer to•
“Using the Machine Setting Mode Key” in the machine’s
Operation Manual.
Press .
The image file will be saved to the USB media.→
cRemove the USB media, and then check
the saved image(s) using a computer.
The files for camera images are saved with the
name “C**.BMP”, and the files for Settings screen
images are saved with the name “S**.BMP”.
“**” in the names “C**.BMP” and “S**.BMP” will•
automatically be replaced with a number between
00 and 99.
Note
If 100 image files have already been saved on the USB•
media, the following message appears.
In this case, delete a file from the USB media or use
different USB media.

3
ENGLISH
DISPLAYING THE GRID
A grid can be displayed when the built-in camera is used
to display the needle position in the LCD.
Memo
For details on using the built-in camera to display the•
needle position, refer to “Checking the Needle Location
in the Screen” in the machine’s Operation Manual.
aPress .
The grid appears.→
To turn the grid off, press• .
OTHER NEW FEATURES
If an area is not selected while using the built-in
camera to align the embroidering position, scanning
will start from the center.
Note
Scanning cannot start from the center after an area has•
been selected. To scan from the center, press to
close the window, then display the window again but do
not select an area to scan, then press .
The image of the needle position displayed by the
built-in camera can be magnified by 200%.
The parameters in the Settings screens can also be
displayed in a language other than English.
Example: Deutsch (German) screen
When combining character patterns, the stitching
connecting patterns (jump stitches) are no longer
displayed in the preview so that the patterns can be
viewed more clearly.
Note
Jump stitches may be displayed on the character.•

4
If twin needle sewing has been selected, the stitching
is displayed in the preview as two rows of stitching.
Memo
Two rows of stitching are displayed even if• was
pressed.
When pressing the keys for advancing/returning to a
page, for example, in the pattern selection screen, the
pages are scrolled through continuously (from the last
page directly to the first page or from the first page
directly to the last page).
Note
The pages displayed after• is pressed cannot be
scrolled through continuously.
Settings screen
Since functions have been added, a page has been
added to the Settings screen.
New settings available with Upgrade Kit I (sold
separately) are added.
Note
For details on Upgrade Kit I, visit our website “www.•
brother.com” or contact your authorized dealer.
The keys for these new functions are activated when
the Upgrade Kit I is purchased and Certification has
been completed on machine.
Background Image Display and Fabric Thickness→
Sensor are activated after Upgrade Kit I is
installed.

5
ENGLISH
NEW PATTERNS
Character Decorative Stitch
Embroidery/Embroidery Edit

English
111-001