8
OPERATION OF FUNCTION MENU
USING THE MAGIC REMOTE
1. If you shake the Magic Remote left and right or turn its wheel while pointing it at the TV, a pointer will appear
on the TV screen.
If you move the remote control to the direction you want, the pointer follows the movement.
2. Move the pointer to the location you want and press the Wheel (OK) button to execute the function.
3. If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from
the screen, shake the Magic Remote right and left. It will then re-appear. The pointer will disappear if you press the
up, down, left or right buttons, and the remote will work as a conventional remote.
If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen.
Use the remote control within the specified range (within 10 metres). The device may not function properly
when outside the working distance or when an obstacle blocks the line of sight.
Depending on the peripherals (wireless router, microwave oven, etc.), communication failures may occur.
Impacts can cause the Magic Remote to malfunction.
Take care not to bump into nearby furniture, electronic equipment or other people when using the Magic
Remote.
1.3 Using TV Functions through Speech
Using TV Functions through Speech
You can easily and quickly access the TV's various functions through speech recognition.
1. Press and hold the button on the remote control and speak out the function you want to launch or the
keyword you want to use for your search.
2. Once you release the button after your speech input, the corresponding function is launched.
Some models may not be supported.
Your Location must correspond to the language for exact search results. Some functions may not be available if
your location settings and language settings are different.
You can change the language in → →General → Language → Menu Language.
CAUTIONS FOR SPEECH RECOGNITION
Voice recognition requires a Magic Remote, which
may not be supported by certain models.
To use all speech recognition features, you need to
set your programmes, region, etc. Otherwise, you
cannot use some features.
You must have a network connection to use the
speech recognition feature.
If you have a network connection, you need to
accept the terms and conditions to use speech
recognition.
To control the set top box connected to the TV with the voice recognition feature, go to →→
Connection → Device Connection Settings → Universal Control Settings to set up a universal remote control.
It is recommended to point Magic Remote toward the set top box after the voice input.
The rate of speech recognition may vary depending on the characteristics of the user (voice volume,
pronunciation, accent, and talking speed) and the surroundings (noise and TV volume).
To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at
an appropriate voice volume at a distance of about 10 cm away from the Magic Remote's microphone.
If your speech is not recognised properly, speech recognition may operate differently than you originally
intended.
1.4 Speech To Text
USING SPEECH TO TEXT
You can enter text in text fields using the speech recognition function.
Select the button on the keyboard screen to switch to speech input mode.
Some models may not be supported.
