BSIMB BS-W15E User manual

User Manual
15" Smart Digital Picture Frame
BS-W15E
CONTENTS
01 - 20
21 - 38
⽇本語
English
39 - 59
Deutsch

1. 15” digital photo frame
2. AC/DC adapter
3. Bracket
4. Quick Start Guide
5. User Manual
6. Micro USB Cable
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
English
CONTENTS
CONTENTS
FRAME FEATURES
1 2
1
1. Motion sensor len
2. Speaker
3. Lock button
2 3
7
6
5
4
8
4. Micro SD card slot
5. DC IN
6. USB(Type A)
7. Micro USB
8. Stand

1. Plug in your frame
Plug the socket in the back and connect the photo frame to a power source. The frame
will power on in seconds. You can place the frame either in landscape or portrait mode
(we recommend you place it in landscape mode during the first setup).
Note:
1.As this is an electronic product, please be careful not to drop
it. Once dropped, functions may not be available.
2.If you encounter abnormal use of the machine, it is recommended to use another
socket to avoid unstable voltage situation.
3.If there is a protective film on the screen of the digital photo frame and there are
bubbles, we recommend that you remove it.
2.Initial Settings
There are several initial settings ( Language, Wi-Fi, Nickname, City, Timezone etc.)
when you enter the system for the first time.
3. Connect to Wi-Fi
You can connect to Wi-Fi during the initial settings or under the Wi-Fi setting. Select the
Wi-Fi network you would like to connect to and enter the correct password if required. If
your Wi-Fi network is not on the list, restart the router or move your frame closer to your
router, wait for seconds and check it again.
Note:
①The photo frame supports 2.4GHz Wi-Fi networks only.
②A private Wi-Fi network is highly recommended.
③The screen will be displayed about 10 seconds after
the logo is displayed.
UPLOADING PHOTOS AND VIDEOS
GETTING STARTED
34
Upload Photos and Videos Via VPHOTO App
Please download and install the VPhoto app on your mobile device by searching
VPhoto on the App Store or Google Play(Note: If the app temporarily doesn't
match your phone, please download it again.).
2. Create an Account
Open the VPhoto app, please set your user name and your profile photo.
3. Pair Your Frame via the App
You will be required to enter the connection code or scan the QR code of your frame. It’s
in [Settings→ My Frame] on your frame. Once the process is completed, you will see a
pop up message [ Bind success].
Note:
①Connection Code is a 9-digit series number which can be found in your frame,
device main interface→Settings →My frame.
②The Connection code and QR code will refresh every 12 hours.
③Before you view the connection code and QR code, Please make sure your frame
is connected to Wi-Fi, otherwise the connection code and QR code will not load out.
1. Download the VPhoto App

56
4. Upload Photos and Videos to Your Frame
After connecting the App to your frame, you can start adding photos and videos
to your frame anywhere and anytime as below two ways:
①Select the photos or videos of your Albums of your phone to upload and choose the
frame to send. Click the Next Step, you can write caption for each photo and choose the
frame you want to send.Click the right arrow icon to confirm.
②Click Camera icon to take new photos or videos and choose the frame you would like
to send to. Click the right arrow icon to confirm. The photo frame will receive the photos
or videos in seconds, you can check the photo or video library on the frame.
Note:
①If the frame didn’t receive the photos or videos, please reboot the product or check
the Wi-Fi network.
②Each video clip is limited to 200MB.
UPLOADING PHOTOS AND VIDEOS

7 8
5. Invite Your Families&Friends to Connect Your Frame
Your families and friends can share their happy moments to your frame by
following steps:
①Download and install the app.
②After opening App, please set user name and profile photo.
③Get the connection code shared by you to connect to your frame.
④Start sending the photos and videos to your frame.
Here are two ways to share you connection code:
1) Take a picture of the connection code on the frame to send.
2) Open your VPhoto App, click More icon on the upper left corner and choose
Connected Device, select the frame you want your friend to connect, click the
Share icon. You will receive a picture of QR code and Connection code. Send
this to your families and friends.
Note:
①Connection Code is a 9-digit series number which can be found in your frame,
device main interface→Settings →My frame.
②The Connection code and QR code will refresh every 12 hours.
③Before you view the connection code and QR code, Please make sure your frame
is connected to Wi-Fi, otherwise the connection code and QR code will not load out.
UPLOADING PHOTOS AND VIDEOS

910
UPLOADING PHOTOS AND VIDEOS
Upload Photos and Videos Via Email
You and your friends can also send photos and videos to the frame via your Email.
1. Connect your Email address to the frame via two methods:
①By Pressing [+] in [Us er Management], then add mailboxes. You will receive an email
to inform your binding request is completed and the way to send photos and videos to
the frame.
②By emailing to the mailbox specified in [My Frame], with the subject: bd Connection
Code ( For Example bd1234576789).

2. Upload Photos and Videos to Your Frame
After adding your email address to the frame, you can email photos and videos to the
mailbox of the frame.
Your photos and videos will be received in minutes, you can check the photo or video
library on the frame. Each video clip is limited to 200MB.
UPLOADING PHOTOS AND VIDEOS
11 12
Upload Photos and Videos Via Computer
If you would like to upload large files to the frame, you can use computer to connect to
your frame via USB cable simply.You can transferring photos and videos from
computer in large quantities.
1. Connect your computer and frame with the USB cable.
2. Find your frame disk that named after the frame’s model number in your computer.
3. Add media files that you would like to play on your frame to exact sub-folder in
your frame disk. (pictures into ‘Pictures’ folder, videos into ‘Movies’ folder, etc. )
4. In your frame, the photos, videos and music you upload from your computer will be
stored in ‘Internal Storage’ in the library.
UPLOADING PHOTOS AND VIDEOS
Upload Photos and Videos Via USB Drive/Micro SD/SD Card
The frame can also support some external drive to add photos and videos to the frame.
1. Insert a USB drive/Micro SD/SD card into the frame, and wait for seconds, the frame
will notify you when successfully connected.
2. Enter the Photo or Video library, click USB/SD card and you will see all the photos or
videos stored in the USB drive/SD card.
3. Click the More icon at the upper right corner, select the photos or videos you would
like to copy to the internal memory of the frame.
4. Click the Copy icon at the top then choose OK to import the photos or videos.
5. Your photos or videos will be reserved in internal storage in seconds, you can check
the photo or video library on the frame.
Note:
①Max support a 64GB Micro SD/SD Card.
②Please remove all your external devices when you reset the photo frame.
③If you have too many files stored in the card, it will take more time to read.
④Not all models support external drive. Please take the actual product as the standard.

13 14
Pictures Slideshow
Enter [Picture] in upper-left part of homepage.
You will find [All], [Internal Storage], [SD Card], [USB], [Folder], [Favorites] and user list;
you can check all pictures of each playlist and operate in batch.
KEY FEATURES
• [All] is including pictures in internal storage and external device. The default playlist is
[All], you also can choose[Internal Storage] by tapping one picture of it to start
slideshow.
• [Internal Storage] is all of the pictures sending from app, email, copied from external
device.
• [SD Card]/[USB], shows the pictures in external drive like USB Drive, Micro SD or SD
card. To add pictures to [Internal Storage] from [SD Card]/[USB], you can click [┇] in
upper-right corner, choose the pictures you want to add to [Internal Storage] then click
[ ] and [OK] to confirm the process.
• [Folder], you can create folders and name them. Only pictures in [Internal Storage] can
be added.
• [Favorites], you can add favorite to your photos. Only pictures in [Internal Storage] can
be added favorites, you can tap [ ♡] on the bottom column while playing pictures to
add favorites to pictures.
instead of [ALL]; Or please remove external device while deleting to avoid deleting
files in your USB Drive/Card by mistake.
③ Not all models support external drive. Please take the actual product as the standard.
During the slideshow, you will have more tools to customize the slideshow just by
touching the screen.
You can tap [ ♡] to add the picture to you [Favorites] and set multi-display for fun.
Videos Slideshow
Choose [Video] in homepage, select the video you want to play.
Note: Video Clip shared from the app and email will show in the video library.
Note:
①Only pictures in [Internal Storage] can be added into folders and to favorite.
②To delete some pictures, we highly recommend to operate in [Internal Storage]

15
•At [Users], it allows you to manage the connected account of the frame. Pressing the
account name, you can Views Photos/Remark Name/Delete User/Delete User&Photos.
[Album Settings]
• Brightness
Adjust the brightness of the screen.
•
•
Sound
Adjust the media volume.
Touch sounds
Choose the sound on or off when touch the screen.
• Assistive Touch
Turn on this button, the assistive touch will appear on the screen. It is a quick
navigation key to help you easily go to the Home page and adjust the volume.
•
•
Language: English, Deutsch, Español, Français, Italiano, русский, 日本語,简体中文
Choose the system language.
Slideshow
Set Slideshow time to make the frame automatically displays photos after a period time
of inactivity.
• Slideshow Mode
Choose either Sequential or Random mode to display photos.
• Sort by
Choose the pictures to be sorted by time or name.
• Caption
Turn on this button, the caption you write will be presented with the photo.
Music
Choose [Music] in the homepage, select the music you want to play.
Weather Forecast
Choose [Weather] in homepage, you can check the weather of three days. Both [℃]
and [℉] are available, switch to the temperature format you want to use. By pressing
[+] on upper-left part to add several cities, you can know the weather of the city you
add.
Clock
Choose [Clock], you can choose the clock skin you like to present the time.
Alarm
Choose [Alarm] to set up alarm clock. [Add] for adding new alarm clock and [Edit] for
adjusting the set time and deleting the alarm clock you choose.
MULTIPLE FUNCTIONS
[My Frame] shows your frame connection code and managing users.
• The Connection code and QR code will refresh every 12 hours.
You can also refresh the code manually by .
• To nickname your frame, press the name of the frame on the right corner to edit; it will
show on the app when you connect the frame.
• For sending photos and videos to your frame via email, you can easily by press [＋] at
[User Management] to add the email address.
Please refer to “UPLOADING PHOTOS VIA EMAIL” for details.
GENERAL SETTINGS
16

1. Does the frame have to be plugged in all the time?
This frame needs to connect an DC outlet all the time.
2. Why this frame cannot connect to Wi-Fi?
It supports only 2.4GHz Wi-Fi networks, select the Wi-Fi network you would like to
connect to and enter the password correctly if required. If your Wi-Fi network is not
on the list, restart your router or move your frame closer to your router, wait for
seconds and check it again.
3. Does this frame have to be Wi-Fi connected to work or just in the setup
process?
This frame needs to connect to a Wi-Fi network for setup, receiving new photos/
videos, receiving user requests and software updates. Other than that, the frame
can play photos or video without a Wi-Fi connection.
4. Why the frame does not have sound?
Please check whether the volume is correct and the player is not in Mute mode.
17
[About]
It’s the product information about your frame like Version, Frame ID, Serial Number etc.
When you contact us, sometimes our customer service may ask for frame information
to better know the question. You may find it here.
TROUBLE SHOOTING
• Date and Time
Set the date and time according to your preference.
•
•
Sleep
Set the Auto-On/Off time, as Sleep Schedule, to make the display automatically turn
on and off at a specific time.
Motion sensor
Turn on this button, the frame will turn off when the room is empty for energy saving.
The factory default motion sensor time is 30 minutes. That is, if thesensor does not
detect any movement around you for 30 minutes, the sensor will automatically wait.
• Auto-rotate screen
With auto-rotate screen button on, you can place it in portrait and landscape, the
frame will adjust the picture automatically.
• Notification sound
Choose to be notified new message with sound or not.
[Wi-Fi]
Select the Wi-Fi you want you frame to connect with.
[Factory data reset]
1. Click Factory data reset
2. Here are two kinds of reset:
1) choose ‘Delete all users and restore the device to inactive’; device files will be reset
and all bound users will be unbound.
2) not choosing the option, only device files will be back to default setting. Bound users
remains.
3. Click OK to reset your frame.
[Help]
Simple guide for you to share your pictures. 18