Bubbli BB20FRGPNLA User manual

INTERACTIVE 20-SIDED
BABY PLAYPEN
BB20FRGPNLA

Warning
•This product should be assembled by an adult.
•Keep away from fire or any source of ignition.
•Ensure the installation area is ventilated.
•Place in a well-lit room.
•Do not use the product upside down.
•Check that all parts are assembled well and are stable before use.
•Packing materials are not toys, keep them away from children.
•The recommended age for the product usage is 3 months - 6 years.
•Supervise children while they are playing inside the playpen. Do not allow them to
climb the playpen.
Surface Recommendations
Do not place on the sand surface or uneven ground
Do not place on a slope
Do not place in water or water seepage
Place on a flat, spacious floor
SAFETY & WARNINGS

Door Panel (x1)
Small Panels (x18)
Game Panel with Sound Elements (x1)
Base Connectors (x20)
COMPONENTS

Step 1
Insert a small panel into a base connector.
Step 2
Align a second small panel parallel with the first small panel.
Insert the second small panel into the base connector and at the opening of the first
small panel as shown in the image.
Ensure the small panels are fixed firmly.
INSTALLATION

Step 3
Repeat step 2 to attach the remaining small panels and the base connector.
Attach the door panel and game panel by following the step 2 instructions to complete the
playpen as shown in the image.
Ensure the playpen is properly installed and firmly fixed on the surface before use.
Step 4
To open the door panel, slide the lock to the right.
To close the door panel, slide the lock to the left.
Tips:
•To increase the stability of the playpen, ensure to fix firmly.
•Check regularly whether the small panels are attached firmly on the surface.
•Ensure to disassemble the playpen carefully and gently.
Note: Each panel will be connected to a base connector with a suction cup. This
enables the playpen to stand firmly.

•Clean the suction cups regularly.
•Use sponge and soapy water or other non-corrosive cleaning agents to clean the
product.
The suction cups of base connectors are not
sticking.
The surface may be rough. Ensure to
assemble the playpen on a smooth flat
surface so that the suction cup can stick
firmly on the surface.
See the Safety & Warnings section of this
user guide.
If there is any debris on the suction cups,
clean them with water.
If the suction cups have poor suction
capability, soak it in boiling water and then
paste it on the smooth flat surface when it is
hot.
Product Size
(in mm)
TROUBLESHOOTING
CLEANING & CARE
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com