Buick 2015 LaCrosse Assembly instructions

Review this Quick Reference Guide for an overview of some important features in your Buick LaCrosse.
More detailed information can be found in your Owner Manual. Some optional equipment described in this
guide may not be included in your vehicle. For easy reference, keep this guide with your Owner Manual in
your glove box.
www.buick.com

2
Exterior Lamps Control/
Instrument Panel
Illumination Control
Head-Up Display
Controls
F
(behind steering
wheel)
Driver
Information
Center
Tilt/Telescope
Steering Wheel
Lever
Windshield
Wipers
Lever
Cruise Control/Forward Collision
Alert
F
/Heated Steering Wheel
F
/
Voice Recognition Buttons
Storage
Compartment
Instrument Panel
Symbols
Low Fuel
Traction Control Off
Engine Coolant
Temperature
Cruise Control Set
Adaptive Cruise
Control
Low Tire Pressure
StabiliTrak Active
StabiliTrak Off
Security
Check Engine
Oil Pressure
Brake System
Charging System
Safety Belt Reminder
Airbag Readiness
Antilock Brake System
Lane Change Alert/
Side Blind Zone Alert
Lane Departure Warning
Audio Steering
Wheel Controls/
Driver Information
Center Controls

3
Lane Departure
Warning Button
F
Hazard Warning
Flashers Button
Climate
Controls
Climate Controls/
Driver’s Heated/
Ventilated Seat
Controls
F
Accessory Power
Outlet (in storage
compartment)
Ultrasonic Park
Assist Button
F
F Optional equipment
Refer to your Owner Manual to learn about the information being relayed by the lights, gauges and
indicators on the instrument cluster.
See In Brief in your Owner Manual.
Climate Controls/
Passenger’s
Heated/Ventilated
Seat Controls
F
Infotainment
System

4
Remote Keyless Entry Transmitter (Key Fob)
F Optional equipment
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Lock
Press to lock all doors. The
driver’s door will not lock
when open if the Unlocked
Door Anti Lock Out feature
is turned on. See the Vehicle
Settings menu.
Vehicle Locator/
Panic Alarm
Press and release to locate
your vehicle. The turn signal
lamps will ash and the horn
will sound.
Press and hold to activate the
alarm. The turn signal lamps will ash
and the horn will sound until the button is
pressed again or the ignition is turned on.
Trunk Release
Press and hold to unlock the trunk.
Adaptive Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until the
turn signal lamps ash to start the engine
from outside the vehicle. After entering
the vehicle, turn on the ignition using
the key or ENGINE STOP/START
buttonF.
• During a remote start, the
engine will run for 10 minutes.
• Press and hold the button
until the parking lamps turn off
to cancel a remote start.
Note: To change the remote lock,
unlock, and remote start settings, go
to Remote Lock, Unlock, Start in the
Vehicle Settings menu.
If the remote start heated seat option is
selected, the heated seat button indicators
will not illuminate and the temperature of the
unoccupied heated seat may be reduced during
the remote start. The heated seat turns off
when the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
Door Locks/Trunk Release
Door Locks
To lock or unlock all doors, press the power door Lock/ Unlock button, located on
the interior panels of the front doors.
Note: To change the lock and unlock setting, go to Power Door Locks in the Vehicle Settings menu.
To open a locked door from inside, pull the inside door handle to unlock the door and
then pull the door handle again to open the door.
Trunk Release
To open the trunk, with the vehicle unlocked, press the Trunk Release button on
the driver’s door, press the touchpadFabove the license plate or use the Trunk
Release button on the key fob.
See Keys, Doors and Windows in your Owner Manual.

5
Keyless Access SystemF
The Keyless Access System enables operation of the doors and ignition without removing
the key fob from a pocket or purse. The key fob must be within three feet of the door being
unlocked or the trunk.
Keyless Unlocking
With the key fob within range:
Press the lock button on the driver’s door
handle to unlock the driver’s door; press
it again within ve seconds to unlock
all doors.
Press the lock button on a passenger
door handle to unlock all doors.
Press the touchpad above the license
plate to open the trunk.
Keyless Locking
With the ignition off, the key fob out of the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately.
If Passive Locking is turned on, all doors will lock automatically after a short delay once
all doors are closed.
Note: To change the door lock and unlock settings, go to Remote Lock, Unlock, Start in the Vehicle
Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Keyless Access StartF
Starting the Engine
With the vehicle in Park or Neutral, press
the brake pedal and then press and hold
the ENGINE START/STOP button to start
the engine.
Note: The key fob must be in the vehicle to turn on
the ignition. If the key fob battery is weak, place the
key fob in the pocket in the center console storage
compartment to enable the engine to start. Replace
the key fob battery as soon as possible.
Stopping the Engine
Shift to Park and press the ENGINE START/STOP button to turn off the engine.
Accessory
With the engine off and the brake pedal not applied, press the ENGINE START/STOP
button to place the ignition system in the accessory position.
See Driving and Operating in your Owner Manual.
F Optional equipment

6
Power SeatsF
Power Seat Adjustment
A. Seat Adjustment
Move the front horizontal control to
move the seat forward or rearward, or
to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or
raise the seatback.
C. 4-way Lumbar Adjustment
Move the rear control to adjust the
lumbar support.
Head Restraint Adjustment
The head restraints for the driver and front passenger are adjustable. Two different head
restraints are available.
If equipped, raise the head restraint or move it forward by pulling it up or forward. Lower
the head restraint or move it rearward by rst pressing the button on the left side of the
head restraint and then pushing the head restraint down or rearward.
If equipped, move the head restraint forward by pulling the front part of it forward. Move
the head restraint rearward by rst pulling it forward completely, until it releases, and
then moving it rearward. Raise or lower the head restraint by rst pressing the button on
the left side of the head restraint and then moving the head restraint up or down.
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired positions.
2. Press and hold the SET button and button 1on the driver’s door at the same time until
a beep sounds.
3. Repeat the steps using button 2for a second driver.
Recall Positions
At any time, press and hold button 1 or 2 or the Exit button on the driver’s door
until the stored position is reached. Releasing the button before the stored position is
reached cancels the recall.
With the vehicle in Park and the ignition on, press and release button 1 or 2 or the
Exit button to recall the stored position.
Note: To change the memory recall settings, go to Comfort and Convenience in the Vehicle
Settings menu.
Easy Exit Seat
Automatically move the seat rearward by turning on the Easy Exit feature. See the Vehicle
Settings menu.
See Seats and Restraints in your Owner Manual.
F Optional equipment
A
BC

7
Climate Controls
Driver’s
Heated/
Ventilated Seat
Controls
F
Power
On/Off
A/C
Air
Conditioning
Control
AUTO
Automatic
Operation
Recirculation
Mode
Automatic Operation
1. Press AUTO.
2. Set the temperature for the driver and front passenger. The system automatically
controls the fan speed, air delivery, air conditioning and recirculation to reach the set
temperature. Allow time for the system to reach the desired temperature.
If the air delivery mode or fan speed is manually adjusted, automatic operation is
turned off.
Note: When the recirculation mode is used without air conditioning, the air humidity increases and the
windows may fog.
See Climate Controls in your Owner Manual.
F Optional equipment
Front
Passenger’s
Heated/
Ventilated Seat
Controls
F
SYNC
F
Link passenger’s
temperature
setting to driver’s
temperature setting
Driver’s
Temperature
Control
Air Delivery
Mode Controls
Defrost
Mode
Passenger’s
Temperature
Control
Fan Speed
Control/Off
Rear Window/
Outside Mirror
Defogger

8
Infotainment System
Refer to your Owner Manual for important safety information about using the infotainment system
while driving.
The infotainment system controls include the audio system buttons and touch screen.
See your Infotainment System Owner Manual.
Power/
Volume
Additional Pages:
Touch to view
additional pages
of applications
(if equipped)
Applications:
Touch the
screen icon
to access the
application
Interaction
Selector:
Display
favorite radio
stations
TUNE/MENU:
Tune radio
stations/Open
and select menus
MEDIA:
Select the
media source
Eject
disc
SEEK:
Previous/Next radio
station, track or le
◄BACK:
Move back
one level in
the menus
RADIO:
Select AM,
FM, XM♦
Home page
F Optional equipment
Touch screen shown without OnStar 4G LTE service.

9
Infotainment System
Setting the Time
1. Touch Settings on the home page.
2. Touch Time and Date.
3. Touch Set Time.
4. Touch the arrows to adjust the hours, minutes and AM or PM.
5. Touch ◄BACK to exit the menu.
Storing Favorites
Up to 60 radio stations from all bands (AM, FM or XMF), media (song, artist, album, and
genre), phone contacts and navigation destinationsFcan be stored in any order.
1. Display the desired radio station, media favorite, contact or destination.
2. Touch and drag up the Interaction Selector at the bottom of the screen to
display the favorite screen buttons.
3. Touch and hold one of the favorite screen buttons until a beep is heard.
4. Repeat the steps to store another favorite item.
Note: To change the number of favorites displayed, go to Radio > Manage Favorites in the Vehicle
Settings menu.
Portable Audio Devices
See your Infotainment System Owner Manual.
Note: Connect an iPod/iPhone USB cord after
starting the vehicle for optimum performance.
An accessory power outlet, 3.5-mm auxil-
iary input jack, and USB port are located in
the center console.
An iPod®, iPhone®, MP3 Player, a USB
ash drive or a USB mass storage
device can be connected to the USB
port. Search for music on-screen or by
voice commands.
Press the MEDIA button to select a
portable device as the audio source.
F Optional equipment

10
IntelliLink System
IntelliLink uses a Bluetooth or USB connection to link to a compatible device, such as a
smartphone, cell phone, USB ash drive or portable audio player/iPod®. IntelliLink enables
streaming audio through a smartphone and hands-free voice control. For assistance with
the IntelliLink system, contact Customer Assistance at 1-855-4-SUPPORT (855-478-7767)
or go to www.buick.com and click the Owners link.
Natural Voice Recognition
Control the music source and make phone calls hands-free (after pairing your Bluetooth-
enabled phone) using the natural voice recognition system.
1. Press the Push to Talk button on the steering wheel.
2. The radio will say “Say a command,” followed by a beep.
3. After the beep, say what you want it to do.
• Phone (using your paired phone):
Example command: “Call Amanda” or “Dial 555-1212”
• Media Music Device Search (when connected to USB only):
Example command: “Play artist [name]” or “Play song [name]”
• Radio control:
Example command: “Tune FM 104.3” or “Tune XM Classic Vinyl”
• Help:
Say “Help” for voice recognition assistance
PANDORA®Internet Radio
Listen to personalized radio stations based on favorite artists or genres.
Download the latest Pandora app to your smartphone. Restart the smartphone and
sign in to Pandora.
Create a station on your phone to listen to a customized song list in the vehicle.
Connect your smartphone/device to the system by Bluetooth or, for Apple devices,
by a USB cable.
Touch the Pandora icon on the touch screen to access Pandora. A slight delay may
occur when loading a song or changing a station.
SiriusXM™ Satellite RadioF(Subscription required)
SiriusXM provides access to over 180 channels of commercial-free music, sports, talk,
entertainment, comedy and weather using the radio controls or voice commands.
• XM Tune Select nds your favorite artists or songs on all XM stations and alerts you.
• XM Travel Link includes weather and other travel information. Additional subscription
fee required.
See your Infotainment System Owner Manual.
F Optional equipment

11
Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in-vehicle
Bluetooth system. Not all devices will support all functions. The pairing process is disabled
when the vehicle is moving. For more information, visit www.gmtotalconnect.com.
Pair a Phone
1. To use voice recognition, press the Push to Talk button; after the beep, say “Pair,”
or
Use the MENU knob or the touch screen to select the Phone icon > Phones > Pair Device.
2. Start the pairing process on the phone. Locate your vehicle name or IntelliLink on the
phone.
3. Enter the four-digit code that appears
on the touch screen into the phone or,
if a six-digit code appears on the phone,
conrm it on the touch screen.
4. If your phone prompts you to accept the
connection or phone book download, click
“yes” and always allow.
Streaming Audio
With a paired device connected via Bluetooth, select Bluetooth Audio on the touch screen
home page to stream audio from the device. Control audio operation using the device
controls.
Audio Steering Wheel Controls
+ –Volume
Press up or down to adjust the volume.
Next/Previous
Press or to go to the next or
previous radio station, track, or le.
Push to Talk
Press to answer an incoming call or
to interact with the audio, Bluetooth,
navigationFor OnStar®system.
End Call/Mute
Press to end or reject a call.
Press to mute the vehicle speakers.
See Instruments and Controls in your Owner Manual.
See your Infotainment System Owner Manual.
F Optional equipment
Bluetooth® System

12
Navigation SystemF
OnStar® with 4G LTE
F Optional equipment
Refer to your Owner Manual for important safety information about using the navigation system
while driving.
Touch the Navigation icon on the home page to access the navigation functions.
Use the OnStar 4G LTE connection to stream data to your personal mobile devices. Up to
seven compatible devices (smartphones, tablets and laptops) can be connected to high-
speed Internet through the vehicle’s built-in Wi-Fi®hotspot.
Go to onstar.com or call 1-888-4-ONSTAR (1-888-466-7827) for assistance.
Note: See onstar.com for a detailed instruction guide, vehicle availability, details, and system limita-
tions. Services and apps vary by make, model, year, carrier, availability, and conditions. 4G LTE
service is available in select markets. 4G LTE performance is based on industry averages and vehicle
systems design. Some services require a data plan.
See your Infotainment System Owner Manual.
Entering a Destination
Destinations can be entered by Voice
Recognition, Address, Recent Destination,
Contacts and Places of Interest (POI).
To enter a destination using the single line
destination feature:
1. Touch Navigation on the home page.
2. Touch Destination (A).
3. To enter a specic address, type the
address, intersection or road (B).
4. Touch Go.
5. Select the desired name from the
generated list.
6. Touch Go.
To enter a destination using voice
recognition:
1. Press the Push to Talk button.
2. Say “Destination address” to enter
specic destination information.
3. Say the address or other destination
information.
See your Infotainment System Owner Manual.
A
B

13
Vehicle Personalization
Some vehicle features can be customized using the audio controls and touch screen
menus.
Changing Vehicle Settings
The Vehicle Settings menus may include
Climate and Air Quality, Collision/Detection
Systems, Comfort and Convenience,
Lighting, Power Door Locks, and Remote
Lock/Unlock/Start.
Use the MENU knob or the touch screen to:
1. Select Settings on the home page.
2. Select Vehicle.
3. Select the desired menu item.
4. Select the desired feature and setting.
Settings are saved automatically.
5. Touch◄BACK to exit each menu.
See Instruments and Controls in your Owner Manual.

14
Driver Information Center
Menu Items
Use the controls on the right side of the
steering wheel to view the Info (includes
the trip odometers and fuel information),
Audio, Phone, Navigation, and Settings
menus.
Press the or button to move
between the display zones.
Press the or button to move
through the displayed menu or
submenu.
Press to open a menu or select/
deselect a setting.
Reset an Item
1. Use the controls to display the item.
2. Press and hold to reset or clear
the item.
Recongurable Instrument Cluster
1. Use the controls to display the
Settings menu.
2. Select Display Theme.
3. Select the desired cluster theme.
See Instruments and Controls in your Owner Manual.
The Driver Information Center (DIC) on the instrument cluster displays a variety of vehicle
system information and warning messages.
Electric Parking Brake
To apply the parking brake, pull up
the Parking Brake switch by the
shift lever.
To release the parking brake, turn on
the vehicle ignition, press the brake
pedal and press down the switch.
See Driving and Operating in your Owner Manual.

15
Exterior Lights
Rotate the knob to activate the exterior
lights.
Off/On
AUTO Automatic Headlamp System
Automatically activates the Daytime
Running Lamps (DRLs) or the headlamps
and other exterior lamps depending on
outside light conditions.
Parking Lamps
Headlamps
Fog LampsF
Press to turn the fog lamps on or off.
Instrument Panel Lighting
Lighting
Wipers and Washers
Instrument Panel Brightness
Rotate and hold the thumbwheel to adjust
the instrument panel lighting.
See Lighting in your Owner Manual.
Move the lever to activate the wipers. HI Fast wipes
LO Slow wipes
INT Intermittent
Rotate the band up for more frequent
wipes or down for less frequent wipes.
OFF
1x Mist
Single wipe.
Washer Fluid
Pull the lever toward you to spray washer
uid on the windshield.
See Instruments and Controls in your Owner Manual.
F Optional equipment

16
Cruise Control
Setting Cruise Control
1. Press the On/Off button
(or Adaptive Cruise ControlF
button, if equipped). The Cruise
Control symbol will illuminate in white
on the instrument cluster.
2. When traveling at the desired speed,
press the switch down to the SET–
position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
StabiliTrak/Traction Control Systems
Turning Off Traction Control
Traction control should be turned off if the
vehicle is stuck and rocking the vehicle is
required.
Press the StabiliTrak/Traction
Control button. The Traction Control
Off light will illuminate in the instrument
cluster. Press the button again to turn
on the system.
See Driving and Operating in your Owner Manual.
F Optional equipment
Adjusting Cruise Control
RES+ Resume/Accelerate
Press up to resume a set speed. When the system is active, press up to increase speed.
SET– Set/Coast
When the system is active, press down to decrease speed.
Follow Distance Gap (Adaptive Cruise ControlFonly)
Press to select a setting of Far, Medium, or Near. This setting is also the setting for the
Forward Collision Alert timing.
Cancel
Press to cancel the cruise control without erasing the set speed from memory.
Pressing the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicle ignition is
turned off.
See Driving and Operating in your Owner Manual.
The traction control system limits wheelspin and the StabiliTrak stability control system
assists with directional control of the vehicle in difcult driving conditions. Both systems
turn on automatically every time the vehicle is started.

17
Driver Assistance Systems
The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Forward Collision AlertF– When approaching a vehicle directly ahead too quickly, the
system ashes a visual alert and pulses the Safety Alert SeatF. See Safety Alert Seat.
To set the alert timing to Far, Medium, or Near, press the Collision Alert button
or the Follow Distance Gap button on the left side of the steering wheel.
Lane Departure WarningF– When crossing a detected lane marking without using a turn
signal, the system ashes a visual alert and pulses the left or right side of the Safety Alert
Seat♦. See Safety Alert Seat.
To turn the system on or off, press the Lane Departure Warning button on the
center of the instrument panel.
Side Blind Zone Alert/Lane Change AlertF– While driving, the Side Blind Zone Alert/
Lane Change Alert displays a warning symbol on the left or right side mirror when a
vehicle is detected in that side blind zone area or rapidly approaching that side blind zone
area. The warning symbol ashes if a turn signal is activated when a vehicle has been
detected.
To turn the system on or off, go to Collision/Detection Systems > Side Blind Zone Alert
in the Vehicle Settings menu.
Rear Parking AssistF– During low-speed parking maneuvers, the Rear Parking Assist
system displays a caution symbol on the Rear Vision Camera when an object is detected.
One beep sounds or the Safety Alert Seat pulses when an object is rst detected and ve
beeps sound or the Safety Alert Seat pulses when an object is very close.
To turn the system on or off, press the Parking Assist button on the center of the
instrument panel.
Safety Alert SeatF– Subtle driver’s seat pulses, left or right, or simultaneously, alert the
driver of potential hazards.
Note: Audible notication may be selected instead of Safety Alert Seat pulsing notication. To change
the alert setting, go to the Collision and Detection menu in the Vehicle Settings.
See Driving and Operating in your Owner Manual.
F Optional equipment

18
eAssist Overview (if equipped)
A compact electric assist system called eAssist has been integrated with the highly efcient
2.4-liter four-cylinder engine and six-speed automatic transmission to provide an electric
“boost” to help conserve fuel. eAssist includes a small, but powerful, electric motor rated at
15 kilowatts. It replaces the typical alternator found on most engines. eAssist also uses a
small, advanced 115-volt lithium-ion battery located in the trunk.
eAssist Features
Auto Start/Stop
While driving, when the brake is applied and the vehicle comes to a complete stop, the
automatic engine start/stop system may turn off the engine, referred to as an Auto Stop. In
Auto Stop mode, the tachometer gauge will read AUTO STOP. The audio system, climate
controls and other accessories will be powered by the high-voltage battery. The engine will
restart immediately when the brake pedal is released or the accelerator pedal is applied.
After parking the vehicle and turning off the engine, the tachometer gauge will read OFF.
There are several conditions that may cause the engine to remain running or restart when
the vehicle is stopped.
• The engine, transmission or high-voltage battery is not at the required operating
temperature.
• The outside temperature is less than –4º F (–20º C).
• The shift lever is in any gear other than Drive (D).
• The high-voltage battery state of charge is low. It will automatically recharge as the
vehicle is driven.
• The climate control system requires the engine to run based on the climate control or
defog setting. Using the eco Air Conditioning mode will result in more frequent and
longer Auto Stops than the Comfort Air Conditioning mode.
• The Auto Stop time is greater than two minutes.
See Driving and Operating in your Owner Manual.
Power Flow Display
The Power Flow display, located on the infotainment system touch screen, indicates the
current eAssist operating mode, energy ow direction and high voltage battery charge
level. The operating modes include Engine Idle, Auto Stop, Engine Power, Hybrid Power,
and Regen Recovery.
See Instruments and Controls in your Owner Manual.

19
eAssist Features
Driver Efciency Gauge
The driver efciency gauge, located on the instrument cluster, assists you in driving ef-
ciently. To maximize efciency, attempt to keep the pointer in the solid green zone in the
middle of the gauge. The gauge moves down when braking and up when accelerating or
driving at high speeds. When driving aggressively, it is less efcient and the gauge will
move farther away from center. The eAssist system’s ability to capture energy while the
vehicle is slowing down makes decelerating important for vehicle efciency.
See Instruments and Controls in your Owner Manual.
Climate Control Settings
Select the eco Air Conditioning setting (green A/C indicator) for maximum efciency. This
setting will maximize the frequency and duration of Auto Stops while still providing cabin
comfort when the vehicle is in an Auto Stop. To further maximize efciency, operate the
climate controls in the Automatic mode at the highest comfortable temperature setting or
turn off the air conditioning system when climate conditions allow.
Select the comfort Air Conditioning setting (amber A/C indicator) for maximum cabin
comfort. Auto Stops will be reduced in both frequency and duration.
See Climate Controls in your Owner Manual.
Regenerative Braking
When braking or coasting, the electric motor acts like a generator to charge the high-
voltage battery. This “regenerative braking” process captures kinetic energy that would
otherwise be lost and stores it in the high-voltage battery. This electrical energy can then
be reused.
Note: Capturing kinetic energy causes transmission shifts that have more feel when braking or coasting.
See In Brief in your Owner Manual.
Next Generation Transmission
The eAssist system employs a next generation six-speed transmission with sophisticated
algorithms that continuously store information about your driving style, such as acceleration
and braking. Over the rst 250–400 miles, some transmission shifts may be more notice-
able. As the vehicle is driven in a variety of city and highway driving conditions, eAssist will
use its onboard processing power to quickly “learn” your driving habits to deliver a seam-
less driving experience.
See Driving and Operating in your Owner Manual.
Hill Start Assist
After stopping on an incline, the Hill Start Assist feature momentarily holds the vehicle
when the brake pedal is released. The driver-applied brake pressure is used during the
stop to keep the vehicle from rolling during the period between when the brake pedal is
released and the accelerator pedal is applied.
See Driving and Operating in your Owner Manual.

20
Roadside Assistance
1-800-252-1112 TTY Users: 1-888-889-2438
As the owner of a new Buick, your vehicle is automatically enrolled in the Buick Roadside
Assistance program for 6 years/70,000 miles, whichever occurs rst, at no expense to
you. This value-added service is intended to provide you with peace of mind as you drive
across town or travel the open road.
Buick’s Roadside Assistance toll-free number is staffed by a team of trained advisors
who are available 24 hours a day, 365 days a year, to contact a service provider for light
ser vices (fuel delivery, jump-starts, at tire and lock-outs) or make arrangements to tow
your vehicle to the nearest Buick dealer.
Roadside Assistance and OnStar
If you have a current OnStar subscription, press the OnStar button and the vehicle will
send your current GPS location to an OnStar Advisor who will speak to you, assess your
problem, contact Roadside Assistance and relay your exact location so you will get the
help you need.
Buick Owner Center
The Buick Owner Center, a complimentary service for Buick owners, is a one-stop resource
designed to enhance your ownership experience. Exclusive member benets include online
service reminders, vehicle maintenance tips, online owner manual, special privileges and more.
Sign up today at my.buick.com.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner Manual for
complete instructions. All information contained herein is based on the latest information available at the time of
printing and is subject to change without notice. Copyright 2014 General Motors. All rights reserved.
We recommend always using ACDelco or genuine GM service parts.
myBuick and OnStar® Mobile Apps
The myBuick and OnStar RemoteLink mobile apps connect owners to a
variety of vehicle information and services, such as a searchable Owner
Manual, real-time fuel information and Roadside Assistance, as well as
enabling users to perform Remote Keyless Entry transmitter commands,
including locking and unlocking the doors and starting the vehicle.
An active OnStar account is required to use the OnStar mobile app. Download the mobile
apps from your iPhone®or Android™ device’s app store. To learn more about OnStar
services, press the OnStar button, refer to your Owner Manual, call 1-888-466-7827 or
visit onstar.com.
22941407 A
!22941407=A!