CABASSE THE PEARL User manual

THE PEARLTHE PEARL
THE PEARL AKOYATHE PEARL AKOYA
THE PEARL SUBTHE PEARL SUB
User guide

2 3
Thank you for purchasing a Cabasse speaker. We recommend you read this leaet carefully to
take full advantage of the speaker.
Explanation of symbols
Lightning within an equilateral
triangle warns of the existence of
dangerous, uninsulated high voltage
inside the product enclosure, of sucient va-
lue to present a risk of electric shock.
The exclamation point in an equilate-
ral triangle warned of the existence
of instructions usage and mainte-
nance in the documentation attached to this
product.
Cleaning - Unplug the unit before clea-
ning. Do not use cleaning solutions in liquid
or aerosol form. Use preferably a damp cloth.
Installation on furniture and
stands - Do not place this unit on an uns-
table stand, such as stands, tripods, tables,
shelves, etc. It could fall and cause serious
injury to a child or adult who is nearby.
Ventilation - The appliance must be po-
sitioned so that it does not interfere with its
own ventilation. For example, it should not
be installed on a bed, sofa, blanket or similar
surfaces that could block its vents. It should
not be embedded in conned spaces such as
narrow shelves or furniture that could limit
the amount of air available to the air intakes.
Power supply - The appliance must only
be connected to a power source of the type
written in the user manual or in line with
the product. If you are unsure of the type
of power supplied to your location, contact
your dealer or the local power company.
Electrical Overloads -Do not
overload power outlets, exten-
sion cords, or power reminders. This
could result in re or electrocution.
Foreign bodies and liquids - Care
should be taken never to let foreign objects
or liquids enter the unit. They could cause
res or electrocutions. Never pour liquid of
any kind into the device.
Maintenance - - In the following cases,
you must unplug your appliance and have it
checked by a qualied technician:
the power supply or plug has been damaged.
foreign bodies or liquid have entered the de-
vice.
the unit has been exposed to rain or has been
sprayed with water.
the unit does not seem to be working pro-
perly while you are using it as part of its nor-
mal operating instructions.
Only handle the controls covered by the user
manual. Any other procedure could damage
it and require the intervention of a qualied
technician.
the unit has fallen or its bodywork is da-
maged.
the device shows signicantly changed per-
formance.
In a disturbed area environment (thunders-
torm etc ...), the product may sometimes re-
quire shutdown and restart by means of the
ON / OFF power switch located on the rear
panel of the device to work properly again.
Spare parts - If the repair required the use
of spare parts, make sure that the technician
has used the references recommended by
the manufacturer or having the same charac-
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS!
teristics as the original parts. Non-conforming
parts may cause re, electric shock or other.
Checks - After any work on the unit, have
the technician perform tests to ensure that the
unit operates safely.
Plastic Bags -Do not leave plastic bags
in the box within reach of children to avoid
choking.
1. READ these instructions.
2. SAVE these instructions.
3. RESPECT all warnings.
4. FOLLOW all instructions.
5. DO NOT use this unit near water.
6. CLEAN ONLY with a dry cloth.
7. DO NOT obstruct the ventilation holes.
Install according to the manufacturer's instruc-
tions.
8. DO NOT install near any heat sources such as
radiators, heat registers, stoves, or other appara-
tus (including ampliers) that produce heat.
9. DO NOT disable the safety feature of the
polarized or ground pin plug. A polarized plug
has one blade wider than the other. A ground
pin plug has two blades and a third pin for the
ground. The wide blade or the third pin is pro-
vided for the safety of the user. If the provided
plug does not t into the outlet, have an electri-
cian replace this outlet type that is too old.
10. PROTECT the power cord, making sure that it
is not likely to be
stomped or crushed, particularly near the
plugs, power strips and its point of exit from the
device.
11. USE ONLY the accessories recommended by
the manufacturer.
12. Unplug this apparatus during lightning
storms or when unused for
a long time.
13. CONFIRM any troubleshooting work to a
competent professional repairer.
Have the device repaired in case of damage, for
example: damaged plug or power cord, liquid
spilled on the device or object inserted in the
device, unit exposed to rain or moisture, malfu-
nction or after a fall.
14. RUNOFF / HUMIDITY: To prevent re or shock
hazard, do not expose the unit to water or mois-
ture. The appliance must not be exposed to any
risk of liquid leaks, no object such as a vase will
be placed on or above the appliance.
15. KEEP this product a safe distance away from
any naked ame, such as a lit candle.
16. THE MAINS are nor disconnected in the o
position, but the circuits are de-powered.
CAUTION: do not ingest the battery, fatal risk of chemical burn within 2
hours. Always keep button cells, new and used, out of reach of children. Seek
immediate medical attention if you think that batteries may have been swal-
lowed or inserted anywhere in the body. If the battery compartment no lon-
ger closes securely, stop using the product and keep it away from children.

4 5
UNPACKING
Open the cardboard box widely and take out the dierent elements one by one. If any
of the items on the carton appear to be damaged, do not use it, put it back in the origi-
nal carton and contact your dealer immediately.
Keep your packaging for possible future transport of your system.
THE COMPONENTS OF YOUR SYSTEM
THE PEARL, 1 power cord, 1 remote control, 1 simplied instruction and 1 warranty card.
THE PEARL SUB, 1 power cord, 1 remote control, 1 simplied instruction and 1 warranty
card.
THE PEARL AKOYA, 1 power cord, 1 remote control, 1 simplied instruction and 1 war-
ranty card, 1 USB adaptor, 1 RCA-Jack 3.5 mm adapter , 1 sac carry bag.
Volume +
Preset 1 access
Previous
Play / Pause
Next
Source Selection
Volume -
REMOTE CONTROL KEYSTHE PEARL
FUNCTIONS
Bluetooth
connection
WLAN/LAN
via internet
routeur / box
Loss less audio broadcast YES
Access to all audio media from the WIFI
network (computer ...) YES
Multi-room YES
Broadcast smartphone / tablet audio
content YES YES
Broadcast audio application (youtube
...) from smartphone / tablet YES
Broadcasting from USB media YES
Internet radio and music services Qobuz, Deezer,
Napster, Spotify,
Tidal, Vtuner

6 7
THE PEARL / THE PEARL SUBTHE PEARL / THE PEARL SUB THE PEARL AKOYATHE PEARL AKOYA
Status LED Pairing LED
Reset Pairing
Optical LAN USB ON/OFF Analog RCA IN
POWER
Status LED Pairing LED
Reset Pairing
Optical LAN ON/OFF Analog
USB
POWER

8 9
THE PEARL SUBTHE PEARL SUB
FIRST USE
Connect THE PEARL THE PEARL AKOYA/THE PEARL SUB to the mains with the proper power
cord.
THE PEARL / THE PEARL AKOYA / THE PEARL SUB are operationals as soon as the LED on the
left of the rear panel opposite is lit in solid blue.
A voice announcement, if the volume of THE PEARL / THE PEARL AKOYA/ THE PEARL SUB
is not at a minimum, indicates the status of the network connection: current, successful,
failure.
STEREO USE WITH 2 THE PEARL / THE PEARL AKOYA / THE PEARL SUB
Use only one remote control to drive a stereo pair. Do not activate another remote in the
same room.
REMOTE CONTROL ACTIVATION
Before rst use, unscrew the screw (PH00
screwdriver), remove the cover, remove
the protective tab, replace the cover and
retighten the screw.
The blue LED on the remote control ashes,
waiting for pairing.
PAIRING THE REMOTE CONTROL
1- Connect the speaker to the mains.
2- Switch on the speaker using the on / o
button on the back.
3- Press the "pairing" button on the back of
THE PEARL/ THE PEARL AKOYA / THE PEARL
SUB briey. The LED "pairing" ashes.
4- The LEDs on the remote control and THE
PEARL stop ashing when the pairing is
nalized.
Replacement of the CR-2450 type button-
cell: turn the remote control over, unscrewthe
screw, remove the cover, remove the old
battery, insert the new battery, marked "+"
to the outside, replace the cover, tighten the
screw.
COLOR CODES OF THE STATUS LED
CYAN DLNA input: wi, Ethernet, domestic streaming , internet streaming
GREEN Spotify Connect
WHITE Aux In Input
YELLOW Optical input
BLUE Bluetooth input
RED (ashing) Connexion to network failed
PURPLE Automatic calibration running
Status LED Pairing LED
Reset Pairing
Optical LAN USB ON/OFF Analog RCA IN
POWER

10 11
ANALOG INPUT
This input can be connected to an
audio source (CD player, MP3 player,
smartphone, TV) equipped with an
analog output RCA or mini-jack type.
Use RCA / RCA cord or minijack / RCA
cord (not included)
USB INPUT
This input is only useful for use in Wi-Fi / Ethernet
mode (paragraphs 4,5,6 below). Connect a USB stick
or hard drive containing audio les to this input
to automatically network them. All les in formats
recognized by the DLNA server included in THE
PEARL are then listed in the Stream Audio Control
application and can be read by all Cabasse Stream
players connected to the same network. The PEARL
USB socket has a 5V - 1A DC power supply for use
with a portable hard drive without external power
supply.
BLUETOOTH CONNECTION
1. Once the speaker is on, press the "Pairing" button on the back
2. The "Pairing" LED on the back should ash
3. Activate Bluetooth on your mobile
4. Select "THE PEARL XXXX Cabasse" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on the back stops ashing
WIRED AND NON-WIRED INPUTS
THE PEARL / THE PEARL SUB
WIRE CONNECTION (LAN) TO THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum
and constant transfer rate in any environment. Use this if
Wi-Fi mode operation shows untimely cuts or stops of
music, signs of a saturated Wi-Fi network, or too much
router-to-stream distance.
Connect an RJ45 cable between THE PEARL / THE
PEARL AKOYA / THE PEARL SUB and your router (or
Box Internet).
The connection is established when the ETH diode changes
to solid blue. The WIFI connection is then automatically
disabled.
CAUTION: DHCP mode of the router must be enabled.
WIRED AND NON-WIRED INPUTS
THE PEARL AKOYA
ANALOG INPUT
This input can be connected to an audio source (CD player, MP3 player, smartphone, TV)
equipped with an analog output RCA or mini-jack type. Use the included RCA / mini-jack
adapter for RCA-RCA cord or minijack / RCA cord (not included), or a mini-jack/mini-jack cord
if the source output is mini-jack type.
Micro-USB INPUT
This input is only useful for use in Wi-Fi / Ethernet mode (paragraphs 4,5,6 below). Connect
a USB stick or hard drive containing audio les to this input to automatically network them.
Use the supplied Micro-USB/USB adpater if needed. All les in formats recognized by the
DLNA server included in THE PEARL are then listed in the Stream Audio Control application
and can be read by all Cabasse Stream players connected to the same network. The PEARL
micro-USB socket has a 5V - 1A DC power supply for use with a portable hard drive without
external power supply.

12 13
WIRELESS DLNA CONNECTION (WLAN) TO WIFI NETWORK
THE PEARL / THE PEARL AKOYA / THE PEARL SUB
on a smartphone or tablet connected to the Wi-Fi network.
1. Install the Cabasse Stream CONTROL App on your tablet
/ smartphone from "Play Store" for an Android device, or
"App Store" for an Apple product.
2. Press "pairing" button for 3 seconds: the blinking pairing
LED shows that the device is ready for pairing
3. Open the "settings" or "parameters" App of your smart
phone or tablet, select "Wi-Fi " then "THE PEARL XXX"
among the list of available networks. You might have to
wait a little for THE PEARL to be listed.
4. Open the application and choose "congure this new
player"
5. Follow the instructions and upon request select the wi-
 network to be used and enter the network password.
6. Start listening to your favorite music from your smartphone, key or hard drive connected
to THE device's USB input, or using sources connected to its analog input or optical input.
The sources connected to the analog and optical inputs of the device can be played by all
the other Stream devices belonging to the same zone.
WARNING !An update of software can start automatically as soon as an
internet connection is made.
The beginning and the end of the update are announced by voice.
Do not turn off or disconnect
THE PEARL,
THE PEARL AKOYA or
THE PEARL SUB
during updates that may require several
minutes.

14 15
USE / SYNCHRONIZE WITH A TV SET
THE PEARL / THE PEARL AKOYA / THE PEARL SUB
CONFIGURATION
1- Lay the device next to your TV, or a pair of devices on both sides of the TV
on a solid stand.
2- Leave a space of at least 3 centimeters between the rear wall and the
appliance.
3- Connect it to the TV with one of the 2 available inputs. Favor the SPDIF
coaxial solution:
- SPDIF optical input: Connect the "OPTICAL IN" input to the TV audio output
(TV Audio OUT) with the supplied optical cable or equivalent. Make sure that
the protective caps at the ends of the optical cable are removed.
- The device analog RCA input: if the TV does not have an SPDIF optical
output, connect the "AUX IN" input to the TV's analogue stereo output (RCA
TV Audio out) with an RCA-RCA cable , or to the headphone output of the TV
with a Jack-RCA cord (not supplied).
- THE PEARL AKOYA analog 3.5mm jack input: if the TV does not have an
SPDIF optical output, connect the "AUX IN" input to the TV's analogue stereo
output (RCA TV Audio out) with an RCA-RCA cable and the supplied RCA to
mini-jack adapter, or to the headphone output of the TV with a Jack-mini-
Jack cord (not supplied).
DEACTIVATION OF THE SPEAKERS OF THE TELEVISION
Turn on the TV, open the TV menu, and look for a tab such as Audio, Sound or Speakers. Use
the menu function to switch o the TV speakers. This menu item may for example be labeled
"Speaker On / O" for speakers on / o. If this function does not exist, bring the TV sound
volume with the TV remote control to the minimum level.
ACTIVATION OF THE OPTICAL OUTPUT OF THE TELEVISION
If there is no sound with an optical connection, set the chosen optical output in the TV menu
if necessary.
OPTIMIZATION OF AV SYNCHRONIZATION
In order to provide a stable stereo reproduction with a WLAN connection, the standard
delay in the rmware of THE PEARL / THE PEAL AKOYA / THE PEARL SUB can be up to 1000
milliseconds. This delay can be divided by 5 or more for AV purpose by selecting the TV
mode instead of the Hi-Fi mode.
STREAM CONTROL APPLICATION
FIRST USE
Open the Stream Control application and launch the tutorial to discover the main features of
the application.
Swipe left-right to open the window giving access to sources and settings.
Select "parameters" then "see the tutorial" at the bottom of the "settings" page. Here are the
main actions detailed here:
- Navigation in the application - Stereo mode
- Selection / conguration of a zone - Voice control
- Zone Management - Audio Customization
- Player options - Favorites
- Media Playback Menu - Services

16 17
AUDIO CUSTOMIZATION
AUTOMATIC CALIBRATION
4: stay away from the
speaker during calibra-
tion. Avoid making
noise
2 : enter into settings /
players / The Pearl / au-
tomatic calibration
3 : follow the instruc-
tions and press "start"
1: place The Pearl speaker on a stable and not resonant stand
or support, with a correct height and orientation according to
your favorite listening positions.
4: press OK to exit or fol-
low further instructions
AUDIO OPTIMIZATION
PREFERED AUDIO SPECTRUM
1 : enter into settings /
players / The Pearl / Au-
dio Spectrum
2: select the expected res-
ponse curve, press "Back"
and save the setting.
Listen to The Pearl with
your favorite cuts. Test an
other option if the set-
ting does not meet your
expectations.

18 19
2 : TURN THE DUAL MONO ZONE INTO A STEREO ZONE
1 : select the left speaker
icone for the The Pearl
on the left
2: select the right speaker
icone for the The Pearl on
the right . Exit Zone. The
stereo pair is listed with a
name composed by both
speakers'names.
3: Stereo balance: press on the "settings"
icone on the right of the volume control
bar and access the volume setting of each
speaker to adjust the left/right balance if
necessary.
3 : select the second The Pearl and create a
group (zone) of 2 speakers.
Note that other Cabasse Stream products
can be added to the zone, for instance for
a synchronised diusion in another room
CREATE A STEREO PAIR
1 : CREATE A ZONE WITH 2 THE PEARL
1 : press on the name of
the rst The Pearl to ac-
cess to Zone
2 : press on the "..." icone
to select the rst The
Pearl

20 21
STREAMING QUALITY OPTIONS
(QOBUZ)
Qobuz (today, and soon other providers) oers
several resolution qualities for most of its strea-
ming catalogue. If your internet access does
not allow to play high resolution les, please
select another position in the audio quality
menu
Open "Audio Quality" in settings / Players/ The
Pearl.
Set the maximum audio quality allowed:
Normal = up to MP3 320 kbs
Superior = up to FLAC 16 Bits / 44 kHz
Best = up to FLAC 24 Bits / 192 kHz
DISPLAY THE AUDIO SPECIFICA-
TIONS OF THE CUT BEING PLAYED
The audio specications are available on most
sources. When playing a music cut open the
here-under page by clicking on the icone on
the left of the volume control bar.
Then click on the "i" info icone to display the
specications
Click on "OK" to erase the specications win-
dow.

22 23
DEEE MARKING
Treatment of electrical and elec-
tronic devices at the end of their
life (applicable in the countries of
the European Union).
This crossed-out wheeled bin sym-
bol axed to the product indicates
that this product should not be
treated with household waste.
It must be handed over to a col-
lection point for the treatment of
electrical and electronic equipment at the
end of its life. By ensuring that this product
is disposed of properly, you will help prevent
potential negative consequences for the en-
vironment and human health. Recycling ma-
terials will help conserve natural resources.
For more information about recycling this
product, you may contact your municipality,
your dump or the store where you purchased
the product.
REPLACING THE BATTERY
FROM THE REMOTE CONTROL
Turn the remote control over, facing towar-
ds the oor. Remove the old battery and re-
place it with another type CR-2450 coin cell.
Dispose of the used battery according to the
information below.
Information about batteries and
accumulators in the equipment
(Applicable in the countries of the
European Union).
This crossed-out wheeled bin
symbol axed to a battery or
accumulator indicates that the
battery or accumulator should
not be disposed of as unsorted
household waste but should be collected se-
parately from the battery. to make it easier to
process and recycle. It must be returned to a
collection point for the treatment of used bat-
teries and accumulators. By ensuring that this
product is disposed of properly, you will help
prevent potential negative consequences
for the environment and human health. Re-
cycling materials will help conserve natural
resources. For more information about recy-
cling this product, you may contact your mu-
nicipality, your dump or the store where you
purchased the product.
WARNING for explosion hazard if battery is
incorrectly replaced: use only the same or
equivalent battery. Do not expose batteries
to excessive heat such as the sun, re or the like.
AUTOMATIC UPDATE
THE PEARL software updates are automatic.
The update time is variable and can last up to
fteen minutes during the rst connection to
the Internet.
The beginning and the end of the update are
announced by voice.
THE PEARL is not functional during this phase.
Note: the reference of the current software
version is available via the Cabasse Stream
application: tab "Settings" + sub-tab "audio
players" + THE PEARL
CLEANING
THE PEARL can be cleaned with a soft cloth,
do not use detergent or liquid that can run
inside the appliance.
Do not use any solvents, chemicals, or
cleaning solutions containing alcohol,
ammonia, or abrasives.
FAQ
Check out our answers to frequently asked
questions on www.cabasse.com, on the
STREAM FAQ page.
AFTER SALES SERVICE
Cabasse has a network of authorized resellers
who are at your disposal to ensure the after-
sales service of your equipment.
For a list of Cabasse Authorized Dealers,
contact us or visit our website www.cabasse.
com.
WARNING ! Do not turn o or
disconnect THE PEARL from the
mains during the update phases!
An update may take several minutes.

24 25
Digital inputs
- 1 DLNA input: wired with RJ45 plug
or Wi-Fi dual band 2x2 802.11a / b / g / n / ac
- 1 Bluetooth 4.2 input
- 1 S / PDIF optical input
- 1 USB 2.0 input 5V 1A
Analog input RCA stereo
Power supply 100-240 V ~60/50 Hz, 6A
Consumption
1,400 W
Consumption in Eco mode 2.9 W @ 100-240VAC~50/60Hz
Remote control Bluetooth low energy
Operating temperature +5°C à +35°C
Storage temperature
-5°C à +40°C
Moisture rate in use 40% to 70%
Network
10/100Mb Ethernet
MAC & PHY
Wireless LAN 802.11b/g/n
WPS 2.0 Security
Digital audio player
(DMR with DLNA 1.5)
Audio formats
Wi/RJ45
MP3, AAC, WMA, WAV, AIFF, FLAC, ALAC
up to 24 bits/ 192 kHz
Voice control Google
Music services Qobuz, Deezer, Napster, Spotify Tidal, Vtuner
Speakers
Active 3-way amplication
Distortion rate plus noise
(THD + N on the tape
20-20 000 Hz for a power of 100 mW
and more)
1 coaxial medium-high BCI
1 x woofer 25 HELD
tweeter: 300 W
medium 300 W
woofer 1 000 W
Wi : < 0.2%
Bluetooth : < 0.2%
Analogic : < 0.2%
Optical< 0.2%
Dimensions
(h x l x p) 326 x 327 x 323 mm
Weight 18 kg
THE PEARL / THE PEARL SUB
FUNCTIONS
Bluetooth
connection
WIFI/ETHER-
NET via routeur
internet / box
internet
Loss less audio broadcast YES
Access to all audio media from the WIFI
network (computer ...) YES
Multi-room YES
Broadcast smartphone / tablet audio
content YES YES
Broadcast audio application (youtube
...) from smartphone / tablet YES
Broadcasting from USB media YES
Internet radio and music services Qobuz, Deezer,
Napster, Spotify,
Tidal, Vtuner

26 27
Digital inputs
- 1 DLNA input: wired with RJ45 plug
or Wi-Fi dual band 2x2 802.11a / b / g / n / ac
- 1 Bluetooth 4.2 input
- 1 S / PDIF optical input
- 1 USB 2.0 input 5V 1A
Analog input JACK 3,5 mm stéréo
Power supply 100-240 V ~60/50 Hz, 6A
Consumption
1,400 W
Consumption in Eco mode 1,9 -W @ 100-240VAC~50/60Hz
Remote control Bluetooth low energy
Operating temperature +5°C à +35°C
Storage temperature
-5°C à +40°C
Moisture rate in use 40% to 70%
Network
10/100Mb Ethernet
MAC & PHY
Wireless LAN 802.11b/g/n
WPS 2.0 Security
Digital audio player
(DMR with DLNA 1.5)
Audio formats
Wi/RJ45
MP3, AAC, WMA, WAV, AIFF, FLAC, ALAC
up to 24 bits/ 192 kHz
Voice control Google
Music services Qobuz, Deezer, Napster, Spotify Tidal, Vtuner
Speakers
Active 3-way amplication
Distortion rate plus noise
(THD + N on the tape
20-20 000 Hz for a power of 100 mW
and more)
1 coaxial medium-high BCI
1 x woofer 17 HELD
tweeter: 300 W
medium 300 W
woofer 450 W
Wi : < 0.2%
Bluetooth : < 0.2%
Analogic : < 0.2%
Optical< 0.2%
Dimensions
(h x l x p) 220 x 220 x 220 mm
Weight 8 kg
THE PEARL AKOYA
FUNCTIONS
Bluetooth
connection
WIFI/ETHER-
NET via routeur
internet / box
internet
Loss less audio broadcast YES
Access to all audio media from the WIFI
network (computer ...) YES
Multi-room YES
Broadcast smartphone / tablet audio
content YES YES
Broadcast audio application (youtube
...) from smartphone / tablet YES
Broadcasting from USB media YES
Internet radio and music services Qobuz, Deezer,
Napster, Spotify,
Tidal, Vtuner

28 29
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions : (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.This
equipment complies with FCC radiation exposure limits set forth for an uncon-
trolled environment.
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body

Cabasse SAS - 210, rue René Descartes - BP 10 - 29280 Plouzané - FRANCE
Tel [phone] - Fax [phone]
www.cabasse.com