Cabela's intrepid User manual

INTREPID
80 mm Spotting Scope

- 3 -
- 2 -
spotting scopes
Twist-up Eyecup
Rapid Focus Dial
Retractable
Sunshade
Objective Lens
Ocular Lens Fine Focus Dial
Magnification
Adjustment Ring
Tripod Mount Collar
Tripod Mount Foot
For long-range observation, put high performance at your fingertips with the
Intrepid® spotting scope.
The InTrepId®SpoTTIng Scope

- 5 -
- 4 -
spotting scopes
1. Insert the eyepiece into the body
of the Intrepid spotting scope.
how ToUSe The InTrepId SpoTTIng Scope
Before attaching the eyepiece, remove any covers that would interfere with attaching the
eyepiece to the spotting scope body. Keep exterior lens covers handy to protect exposed
lenses whenever you’re not viewing through the Intrepid spotting scope.
Attach the eyepiece Adjust the eyecup
The adjustable eyecup twists up and down so that you can observe the
full field of view even if you wear eyeglasses. Twist the eyecup down
when viewing with eyeglasses or sunglasses and twist up when viewing
without glasses.
2. Turn and tighten the retaining
ring to securely attach or remove the
eyepiece.
Adjustable Eyecup

- 7 -
- 6 -
spotting scopes
Rapid Focus Dial
Fine Focus Dial
The versatile magnification of the Intrepid spotting scope allows you to view a wide field
of view at lower power, then zoom in on distant details.
Adjust the magnication
Change the magnification of your spotting scope by simply turning the magnification
adjustment ring.
• Increase the magnification by
turning the adjustment ring in a
counter-clockwise direction.
• Decrease the magnification by
turning the adjustment ring in a
clockwise direction.
Caution: Never look directly into the sun (or any other intense light) with your Intrepid spotting
scope. This could cause damage to the retina and cornea of your eyes to the point of causing
blindness.
Fine focus of the Intrepid spotting scope
After setting the magnification, you can adjust
the fine focus. This does more than allow you to
see critical details, it also ensures fatigue-free
viewing. When you change the magnification, some
refocusing is usually required.
Handle rapid and fine adjustments with just the tip
of a finger:
• Slowly turn the rapid focus dial until the subject is nearly in focus.
• Turn the fine focus dial to pick out the finest details.

- 9 -
- 8 -
spotting scopes
Flexible viewing angle
The tripod mounting collar of the Intrepid allows you to rotate
the spotting scope body for greater viewing flexibility.
• Loosen the mounting collar by turning the thumbscrew to the left.
• Rotate the spotting scope body to a comfortable viewing angle.
• Keep the scope body in your preferred viewing position by securing
the mounting collar with a turn of the thumbscrew to the right.
Extendable sunshade
Extend this fitted hood to effectively block out disturbing
stray light. The sunshade also shields the objective lens
from mechanical damage and guards against soiling by
fingerprints and raindrops.
Attaching the Intrepid to a tripod
Use a sturdy tripod or car window mount as a mount for steady viewing through the
Intrepid spotting scope. Simply secure the tripod mount foot on a quick-release plate or
mounting plate of the tripod head.
Sunshade shield is easily
extended or retracted.
Mounting Collar
Thumbscrew
The tripod foot attaches to any tripod
or car window mount that uses 1/4 x
20 screw threads.

- 11 -
- 10 -
spotting scopes
care and handlIng TIpS
Keep lenses clean
Keep your Intrepid spotting scope in its protective padded case while viewing. If your
spotting scope gets wet, be sure to dry it out thoroughly before packing it away. For long-
term storage, choose a dark, well-ventilated place.
For the best viewing, regularly clean the exterior lenses:
Note: Use lens cleaning fluid and optical paper to clean lenses. Never use facial tissue, heavy
cotton, or lenses—these materials can scratch the surface of a lens.
• Remove any dust or grit from the lens before wiping. Use a can of pressurized air,
soft camel hair brush or an acrylic optical brush.
• Clear lenses of smudges, fingerprints or eyelash oil. Fog the lens with your breath,
then use a non-abrasive lens cloth to clean the lens.
The VIp warranTy
We build optics based on our commitment to your absolute satisfaction. That’s why our
products are unconditionally guaranteed and we make this Very Important Promise to
you—a Very Important Person.
Rest assured that in the event your Intrepid spotting scope
becomes damaged or defective, we will repair or replace the
scope at no charge to you. Call us at 800-426-0048 for prompt,
professional, and friendly service.
2120 West Greenview Drive
Middleton, WI 53562
[email protected]
Visit www.vortexoptics.com for more information.
The VIP Warranty does not cover loss, theft, deliberate damage or cosmetic damage that
does not hinder the performance of the product.

INTREPID
80 mm Spotting Scope