Cactus QUAD ID116 User manual

QUAD
User Manual
SOFTWARE COMPATIBILITY
www.cactuswatches.com
iOS 9.0 & Above Android 4.4 & Above Supports Bluetooth 4.2

iOS 9.0 & Above Android 4.4 & Above Supports Bluetooth 4.2
Setting
Use GetFitPro App on IOS or Android smart phone to
set the QUAD as follows:
Note: hardware and system of devices should meet the
below requirements:
1. Download GetFitPro
Search and download GetFitPro from the
Apple Store or Android App store
Scan the QR code and download
01

2. Product Activation
Before using your CACTUS QUAD ensure that it is fully
charged. When it is fully charged, it will automatically
power on.
Attach the charger to the back of the device and insert
the other end of the charger into the USB interface. An
image of the battery charging will show momentarily on
the device. Charge for at least 2-3 hours before first use.
When fully charged, the device will show battery
percentage as 100%.
You are now ready to wear the CACTUS QUAD – adjust the
length of the band and fasten the device around your wrist.
3. How to Use
Tap to wake up the screen.
Tap to toggle the current page to the next page / move
across the options on the current page.
Press to enter or confirm an option.
4. Pairing your device
Make sure Bluetooth is ON in your smart phone, and
open the GetFitPro app on your smart phone.
When pairing for the first time, you can complete user
registration and binding in one of the following 3 ways:
• Email registration.
• Third party login (We Chat, QQ, Twitter).
• Guest registration. (If guest registration is selected, note
that user data cannot be retrieved if user changes
mobile phones or uninstalls the App).
Please do NOT match the device in the Bluetooth list on
your mobile phone when pairing.
02

Correct pairing method is: click on the App, click on the
device page, scanning will select the matching watch to
complete the pairing, then tap to approve the pairing.
Then click on the App, user page, and complete your
personal information.
To change the time presentation from 12/24 hours, and to
choose metric or imperial measurements, go to the App,
go to device, settings, App Version and Units Settings,
and select your choice.
5. Major functions
• Physical examination: heart rate / blood pressure /
blood oxygen detection
Automatic heart rate monitoring is ON as default, and
the device monitors heart rate all day automatically.
Please note that the QUAD is not intended to be used
for medical purposes, and is not a medical device.
• Multiple exercise modes: jogging (walking) / running /
treadmill / swimming / tennis / stopwatch
• Exercise Heart Rate: continuously track and display the
real-time heart rate range of your current exercise
pattern so that you can achieve better fitness results
• GPS trajectory: display your current trajectory / speed /
hourly speed and other indicators while exercising outside.
This function should be used in conjunction with the APP
• Weather display: today / tomorrow’s weather
• Call management: mute or reject the call or contact
number
• Music control: open the music app on your phone, and
you can play, pause, skip to next item and at the same
time, you can observe heart rate on your watch
• Sleep analysis: automatically detect sleep / wake up
time, and provide sleep quality analysis. You need to
wear the device while sleeping.
• IP67 waterproof: for swimming
• Standby time: normal use 3-5 days
03

Functions & Features
Time Display
• Press the touch key to enter the
device management page
• Device Power / Mute Settings
• Tap the touch key to select the
option to set
• Press the touch key to set the
selected option
Today’s Activity
• The watch records and displays the
number of steps you walk every day,
the amount of calories you burn, and
the distance covered
• More detailed information analysis
and data logging can be viewed in
the App
Health
• Press the touch key to enter the
Health interface, and tap the key to
move from Heart Rate to Blood
Pressure to Blood Oxygen
measurements. Press each interface
to start detection and wait 20
seconds minimum for detection.
04

Sports
• Press the touch key to enter the
Sports interface, and tap the key to
switch to the selected mode of
exercise. Note that jogging interface
is for walking
• Press on selected mode of exercise
to begin exercise recording / Press
to exit the current exercise mode
• The sports page will display the last
recorded exercise information
Weather
• When you connect your watch and
open your GetFitPro app on your
phone, weather information is
synced to your watch and updated
Music Control
• Tap the touch key to select options
• Press the touch key to set the
current options
• You can measure heart rate while
operating remote music control
Message
• The watch displays and stores the
last 5 messages (notifications)
received by your phone. The stored
messages will be iterated all the
time, always showing the latest 5
messages.
05

System Settings
• Tap the touch key to select options
• Press the touch key to set the
current options
Alternate Dial
Options
Screen Brightness
Screen Delay
Other Reminders
Alarm Reminder
06

Remote Camera Control
Calendar Reminder
Hydration Reminder
Sedentary Reminder
07

08
Common troubleshooting
1. What can we do if the watch cannot
connect to the APP?
Please ensure that the watch is scanned in the APP to
connect, do not connect the watch to the phone system
in Bluetooth
1. Make sure your phone’s operating system is iOS 9.0 &
above or Android 4.4 & above
2. Turn o the phone’s Bluetooth and then turn it on
3. Reboot the mobile phone and ensure that Bluetooth is on
4. Do not connect other Bluetooth devices at the same time
*Android equipment needs to open self start-up, high
power consumption and white list to ensure the normal
operation of the APP
1. If the mobile phone can’t find the watch, please make
sure the watch is awake (tap screen on), and that
Bluetooth is on, and the watch is not connected to
other mobile phones
2. Put the watch close to the phone. If it still doesn’t work,
turn o Bluetooth and then restart Bluetooth about 20
seconds later
3. Android 6.0 and above devices need to turn on GPS
Bluetooth to work
2. Cannot synchronize data from the watch
to the App
When the APP and the watch are connected, the APP
will automatically synchronize the data. If you can’t
synchronize, please switch on Bluetooth or restart the
phone, or you can quit APP completely and reopen it.

09
Basic Specifications
Model No.: ID116
Battery Capacity: 160mAh
Sync: Bluetooth 4.2
Working temperature: 0-40C
Waterproof: IP67
Working Time: 5 days
Declaration
The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS Directive
2011/65/EU and revised directive.
WARRANTY
This product is warranted to be free from defects in
materials and workmanship for a period of 1 year from
date of purchase. This warranty covers manufacturing and
mechanical defects but excludes band and lens damage.
www.cactuswatches.com