CAD Audio GSM-1 User manual

Made with pride in Conneaut, Ohio U.S.A.
GSM-1
LECTERN/PODIUM SHOCK MOUNT
FOR MINI-GOOSENECK
MICROPHONES
Description
The ASTATIC GSM-1 is a high performance lectern/podium shock
isolation mount designed for mini-gooseneck type microphones. The
ASTATIC GSM-1 will work with any mini-gooseneck microphone
that is equipped with a 3 pin male XLR connector such as the ASTATIC
200, 900 and 827 series.
The ASTATIC GSM-1 features an exclusive dual point suspension
system. The high mass metal components combined with ASTATIC's
custom formulated I.N.R. (Impact Noise Rejection) elastomer
bushings result in a highly effective compact shock isolation system
that holds the gooseneck firmly in place even on angled surfaces. Unlike
other shock mount systems, the ASTATIC GSM-1 will not allow the
microphone to "sag" or "droop", even when using longer gooseneck
microphones such as the 220, 920 and 827-17.
The ASTATIC GSM-1 features a built in quick disconnect XLR
connector, complete with 6 feet of balanced line cable. Once installed,
microphones easily plug in and out of the top of the mount. There is
never any need to access the underside of the mount or make any
adjustments when inserting or removing a microphone.
ASTATIC Quality
All GSM-1 shock isolation mounts are inspected prior to shipment. Our
absolute commitment to quality insures that ASTATIC products remain
the Best Value in today's competitive industry.
Features and Benefits
 Built in 3 pin quick disconnect XLR connector. Microphone
simply plugs into top of mount. Microphone can then easily be
unplugged for storage.
 Exclusive dual point I.N.R.(Impact Noise Rejection) suspension
provides superior shock isolation yet holds microphone firmly in
position.
 Low profile and small diameter.
 Provides over 20 dB reduction of transmitted impact and surface
noise.
 Internal stop pin protects rubber parts from damage when inserting
or removing microphones.
 Heavy duty steel construction.
 2 Year Limited Warranty.
PATENT PENDING

SPECIFICATIONS FOR GSM-1
TWO-YEAR LIMITED WARRANTY
CTI Audio, Inc. (ASTATIC) hereby warrants that this product will be free of defects in material and workmanship for a
period of two years from the date of purchase. In the unlikely event a defect occurs ASTATIC will, at its option, either repair
or replace with a new unit of equal or greater value. You should retain proof of purchase to validate the purchase date and return
it with any warranty claim. Return warranty claims carefully packed, insured and prepaid to the Service Department at the
address listed below.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to ASTATICs
instructions or unauthorized repair. All implied warranties or merchantability or fitness for a particular purpose are hereby
disclaimed and ASTATIC hereby disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do
not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty
lasts, so the above exclusions and limitations may not apply to you.
Note: No other warranty, written or oral is authorized by CTI Audio, Inc.
Architects and Engineers Specification
The product shall be an ASTATIC GSM-1 shock isolation mount for
use with mini-gooseneck microphones. The shock mount will feature a
dual point suspension system which holds the microphone firmly in
place yet provides superior shock isolation. The shock mount will feature
a 3 pin quick disconnect standard type female XLR connector for easy
attachment and removal of the gooseneck microphone, and 6 feet of
unterminated balanced line cable. The mount will be of heavy duty
steel construction with ASTATIC I.N.R.(Impact Noise Rejection)
custom formulated elastomer shock mount bushings. The ASTATIC
GSM-1 shock isolation mount will provide over 20 dB reduction of
transmitted impact and surface noise. The mount will be finished in
black urethane paint. The dimensions of the mount will be 2.125" (56
mm) at the largest diameter, have an overall height of 3.076" (78 mm)
and mount into a 1 1/4" diameter hole with three included wood screws.
The weight of the mount will be 14 oz. (395 grams). The ASTATIC
Model GSM-1 is specified.
GSM-1 shown with ASTATIC 215 mini-gooseneck microphone.
Installation
The ASTATIC GSM-1 requires a minimum of 3 1/2" clearance below it
as measured from the top of the mounting surface. Once a mounting
location has been chosen, drill a 1 1/4" hole in the surface. Then temporarily
insert the mount into the hole and use it as a template to mark the
location for the three included #6 wood screws.The cable on the ASTATIC
GSM-1 is supplied unterminated. If an XLR connector is required at the
end of the cable, it can be added either before or after the mount is
installed. The cable on the GSM-1 is wired as follows:
Red to pin #2; Black to pin #3; Shield to pin #1
Installation Note
The ASTATIC GSM-1 easily retrofits into the same mounting holes of
a commonly used but less effective rubber band style shock mount that
requires a 1-3/8 inch center hole.
GSM-1 Schematic
Microphone Recommendations
The GSM-1 can be used with all ASTATIC mini-gooseneck
microphones, including the 910, 915 and the 920 in the 900 series, the
economical 827-13 and 827-17 or our popular speciality CTM 16,
CTM17 and the CTM 18 with additional internal shock mounting and
pop filter. The GSM-1 can also be used with the 215 and 220 mini-
gooseneck microphones which feature an on-off switch and power
indicator on the base of the microphone.
-06