Cadillac LYRIQ 2023 User manual

1
LYRIQ
CONVENIENCE &
PERSONALIZATION GUIDE
cadillac.com
Review this quick reference guide for an overview of some important features in your Cadillac LYRIQ. Some equipment described in this guide may not be
included in your vehicle. Contact your dealer for details on a specific vehicle. All information contained in this guide is based on the latest information available
at the time of printing and is subject to change without notice. More information can be found in your Owner's Manual and at cadillac.com/owners.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner’s Manual for complete instructions.
2023

2
INSTRUMENT PANEL
See Introduction in your Owners Manual.
Due to current supply-chain shortages, certain features shown have
limited or late availability, or are no longer available. See the window
label or your dealer regarding the features on an individual vehicle.
Power
Liftgate
Button
Driver’s Power, Heated
& Ventilated, Memory
and Massage Seat
Controls
Turn Signal
Lever/Windshield
Wipers Lever
Instrument
Cluster
Display
Cruise Control/Super
Cruise/Forward Collision
Alert/Heated Steering
Wheel Buttons
Electric Parking Brake/
Lane Keep Assist/Auto
Hold/Instrument Panel
Illumination Controls
Regen on
Demand
Paddle
Control
Panel
Touchscreen
Infotainment
Touchscreen
Vehicle Power On-Off
Button (behind
steering wheel)
Driver Information
Center/Audio/Voice
Control Buttons
Infotainment
Controls/Rotary
Infotainment
Controller
Electronic
Precision Shift
Lever
Climate
Controls
Power Window/
Power Mirror
Controls

3
Cluster Views/
Trip
Information
Gauge View/
Energy View
(shown)/Map View
Applications
Tray
(Shortcuts
to Apps)
Infotainment/Navigation/
Vehicle Settings/ Vehicle
Information
Status
Pane
Right Reconfigurable
Zone – Audio,
Navigation
(not shown)
Left Reconfigurable
Zone – Vehicle
Information
(not shown)
TOUCH CONTROLS
Use simple gestures to interact with the control panel and the
infotainment screen.
Swipe left/right to view the available menus and options.
Scroll up/down to view menu items.
Tap to select or adjust the displayed item.
Press and hold some icons to reset the information.
CLUSTER DISPLAY CONFIGURATION
1. Select Instrument Cluster on the control panel.
2. Select Gauge (information zones), Energy (energy usage),
Map (navigation map) or Clean (no information zones).
VEHICLE INFORMATION (GAUGE VIEW)
1. Select Vehicle Info on the infotainment screen to view the
vehicle information displays.
2. To view an item on the cluster display while in Gauge view,
select Show in Cluster. Select Remove from Cluster to
remove the item or select another item.
BATTERY GAUGE – Displays the propulsion battery state of
charge and an estimated range of the remaining charge.
POWER INDICATOR GAUGE – Displays the instantaneous
charge and consumption power of the propulsion battery.
See Instruments and Controls in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.
Infotainment ScreenControl Panel Cluster Display
CADILLAC INFOTAINMENT SYSTEM

4
KEYLESS ACCESS SYSTEM
Lock
Press to lock all doors and liftgate.
Unlock
Press to unlock the driver’s door or all doors
and liftgate.
[
Remote Start
Press twice to power on the vehicle and
condition the cabin temperature. After entering
the vehicle, press the brake pedal and the POWER button.
To cancel a remote start, press and hold the
[
button until the
parking lamps turn off.
Note: It’s RECOMMENDED to remote start the vehicle when it is plugged
in to use energy from the electrical outlet to assist in getting the cabin to a
comfortable temperature and to leave more battery energy for driving.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
Press and hold for 3 seconds to activate the alarm. Press again
to cancel the alarm.
Power Liftgate
Press twice to open or close the power liftgate. Press once to
stop power operation.
AUTOMATIC MIRROR FOLDING
To enable the automatic power folding mirrors, go to Settings >
Vehicle > Comfort and Convenience > Remote Mirror Folding.
Note: To change or enable some settings, go to Settings > Vehicle >
Remote Lock, Unlock and Start.
See Keys, Doors and Windows in your Owner’s Manual.
The Keyless Access System enables operation of the doors and
liftgate without removing the Remote Keyless Entry transmitter
(key fob) from your pocket or purse. The key fob must be within
3 feet of the liftgate or door being unlocked.
KEYLESS UNLOCKING (DOOR PRESENTERS)
With the key fob within range:
Press and hold the sensing area
(A) on a door release to unlock
thedoor. The door will power
open slightly. Pull the handle on
the exterior door trim to fully
open it. Door unlock settings for
the driver's door can be
customized in the Vehicle
Settings.
Press the lower part of the Cadillac Crest to open the
power liftgate.
KEYLESS LOCKING
With the key fob within range:
Press Lock button on the key fob or interior door panel
to lock all doors and liftgate immediately.
PASSIVE LOCKING
To have all doors and liftgate lock automatically after a
short delay when the vehicle is off, the key fob is removed
from the vehicle, and all doors are closed, go to Settings >
Vehicle > Remote Lock, Unlock and Start > Passive Door
Lock.
To have the driver's door or all doors and liftgate unlock
when using the driver's door, go to Settings > Vehicle >
Remote Lock, Unlock and Start > Passive Door Unlock.
See Keys, Doors and Windows in your Owner’s Manual.
A
REMOTE KEYLESS ENTRY
TRANSMITTER (KEY FOB)

5
KEYLESS START DRIVING EFFICIENTLY
The Remote Keyless Entry transmitter (key fob) must be in the
passenger cabin to power on the vehicle.
STARTING
THE VEHICLE –
POWER ON
With the vehicle in
Park or Neutral,
press the brake
pedal and then
press the
POWER button.
The indicator on
the button will
illuminate green.
When the vehicle is ready to be driven, the READY icon will
appear on the cluster display.
Note: If the key fob battery is weak, place the key fob in the rear cupholder
in the center console to enable the vehicle to start. Replace the key fob
battery as soon as possible.
STOPPING THE VEHICLE – POWER OFF
With the vehicle stopped, shift to Park by pressing the P
button on the end of the Electronic Precision Shift lever and
then press the POWER button to turn off the vehicle.
ACCESSORY MODE
With the vehicle off and the brake pedal NOT depressed,
press the POWER button to activate the Accessory
mode to operate the radio, windows and other accessories
with the vehicle off. The indicator on the button will
illuminate amber.
See Driving and Operating in your Owner’s Manual.
MAXIMIZING RANGE
A number of factors influence energy use and electric range.
Here are a few factors that impact driving range:
Technique – Avoid rapid acceleration or braking. Higher speeds
use more energy and significantly reduce range.
Terrain – Varying road conditions, such as hills, rain, snow, and
wind, impact range.
Climate Settings – The energy needed to warm or cool the
vehicle’s cabin and propulsion battery can cause range to
decline. Turning off the Heat and A/C settings will increase
efficiency.
Outside Temperature – Hotter or colder air has an effect on
vehicle aerodynamics and range.
POWER INDICATOR GAUGE
The cluster display
features a power
indicator gauge to
help track energy
use and extend
battery range. When
the power indicator
gauge is green, you
are driving efficiently.
Avoid driving that
turns the gauge amber,
indicating excessive
power use.
See Driving and Operating in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.

6
The drive unit is
electronically controlled
using the shift lever on
the right side of the
steering column. The
selected position is
illuminated in red on the
lever and is shown on the
cluster display.
Park – Press the P
button on the end of the lever to shift into Park.
Reverse – Press the brake pedal and then pull the lever toward
you and up to shift into Reverse.
Neutral – Press the brake pedal and then pull the lever toward
you and hold briefly to shift into Neutral.
Note: The vehicle will not stay in Neutral for an extended period. It will
automatically shift into Park. See Car Wash Mode in your Owner’s Manual.
Drive – Press the brake pedal and then pull the lever toward
you and down to shift into Drive.
See Driving and Operating in your Owner’s Manual.
ELECTRONIC PRECISION
SHIFT
REGEN ON DEMAND
DRIVER MODE CONTROL
The Drive Mode settings automatically adjust various vehicle
systems based on driving preferences, weather and road
conditions.
Select the Drive Mode icon on the infotainment screen to
change the drive mode.
Available modes may include:
Tour – Use in normal driving for a smooth ride.
Sport – Use for enhanced responsiveness.
Snow/Ice – Use for enhanced acceleration on snowy roads.
My Mode – Use for personalized settings of some subsystems,
including acceleration feel, brake feel, steering and motor
sound.
See Driving and Operating in your Owner’s Manual.
Regen on Demand regenerates energy from the vehicle’s
momentum and stores it in the propulsion battery for later use.
To activate Regen on
Demand, pull and hold
the paddle (A) on the
back of the left side of
the steering wheel.
While pulling the paddle,
the vehicle will begin
to decelerate using
regenerative braking. The
paddle is pressure-sensitive and the vehicle will slow more as
the paddle is pulled; continue holding the paddle for greater
regeneration. Regen on Demand is deactivated once the paddle
is released.
See Driving and Operating in your Owner’s Manual.
ELECTRIC PARKING BRAKE
To apply the parking brake, press the Parking Brake
button on the left side of the instrument panel.
To release the parking brake, turn on the vehicle, press the
brake pedal, and then press the button.
The parking brake will release automatically if the vehicle is
placed in Drive or Reverse and an attempt is made to drive away.
See Driving and Operating in your Owner’s Manual.
A

7
WINDSHIELD WIPERS
AUTOMATIC VEHICLE HOLD
INTELLIBEAM LIGHTING
SYSTEM
Automatic Vehicle Hold
will hold the vehicle
stationary after the brake
pedal has been released
and until the accelerator
pedal is pressed. The
AVH indicator illuminates
in green on the cluster
display when the system is
holding the vehicle.
To turn the system on
or off, press the AUTO HOLD button (A) on the left side of
the instrument panel.
See Driving and Operating in your Owner’s Manual.
To view the exterior lamp controls, go to Virtual Controls >
Lights on the infotainment screen.
The IntelliBeam system automatically turns the high-beam
headlamps on/off based on traffic conditions at night.
The system is activated when the Auto (Automatic) control
setting is selected. A white indicator displays on the
cluster display when the system is on; a blue indicator
displays when the high-beam headlamps are on.
Note: IntelliBeam activates the high-beam headlamps only when driving
more than 25 mph.
See Lighting in your Owner’s Manual.
OFF/Wiper Speed
Rotate the Wiper control
band to turn the wipers
on/off and to adjust the
wiper speed.
1x Single Wipe
Press the button on the
end of the lever once to
wash the windshield and
activate the wipers.
Washer Fluid
Press the button on the end of the lever twice to wash the
windshield and activate the wipers for additional wipes.
See Instruments and Controls in your Owner’s Manual.
ONE-PEDAL DRIVING
Go to Settings > Vehicle > Driving > One-Pedal Driving to
enable and customize “one-pedal driving” while in Drive or
Reverse.
When active, the One-Pedal Driving symbol will illuminate
on the cluster display. When the accelerator pedal is released,
regenerative braking will slow the vehicle without using the
brake pedal, which can help increase energy efficiency. Use the
brake pedal for additional braking or panic stops.
Note: One-Pedal Driving and regenerative braking may be limited when the
propulsion battery is near full charge or cold.
See Driving and Operating in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.
A

8
Applications♦:
Touch a screen icon
to access an app
Power/Volume:
Press to turn power on/
Press to mute/Rotate to
adjust the volume
Phone menu
Navigation
menu
Audio menu
Additional Views/Pages:
Swipe to display additional
views or pages of apps
(if available)
INFOTAINMENT SYSTEM CONTROLS
Read your Owner’s Manual for important information about using the infotainment system while driving.
The infotainment system comes with Google built-in compatibility, which offers a variety of entertainment, communication and vehicle
options. Touch an application icon on the infotainment touchscreen or use the rotary infotainment controller and buttons to access
an item. You can use simple gestures on the touchscreen, such as tap, drag, pinch and spread, to interact with the system. Link a
compatible phone or portable audio player to the system using a Bluetooth or USB connection. For assistance, call 1-855-428-3669
or visit cadillac.com/support.
Home page
Return to
previous
screen
Home page
Applications Tray:
Shortcuts to apps
Rotary Infotainment Controller:
Rotate to highlight an item on
the screen/Tilt knob (left, right,
up, or down) to go to the next
item on the screen/Press to
select an item

9
GOOGLE BUILT-IN†
Google built-in provides access to some of your favorite apps,
including Google Assistant, Google Maps and Google Play.
Google Assistant – Talk to Google in your compatible Cadillac
to get hands-free help to call or text friends, listen to music, set
reminders, or even control the temperature in your vehicle.
To start, say “Hey Google,” tap the Google Assistant icon in
the App Tray on the Home page, or press and release the
Push to Talk button on the steering wheel.
Google Maps – Use Google Maps to find your fastest route,
get updates on traffic, find the nearest coffee shop and know
how much range/mileage you have left when you select a
destination. Sign in to your Google Account for personalized
maps with home/recent locations.
When vehicle data is shared with Google, map features may
include battery charge level at arrival and estimated minimum
charging time. Charging stations also may be added to a route.
Google Play – Download some of your favorite apps in your
vehicle just as you would on your phone, including Spotify and
iHeartRadio, to listen to music, podcasts, audiobooks and more.
Sign in to your Google Account to get your apps, messages,
custom directions and more in your vehicle.
MANAGING HOME PAGE ICONS
1. Press the Home button.
2. To enter edit mode, touch and hold the icon to move.
3. Continue holding the icon and drag it to the desired position
on the screen, and then release.
4. Touch Done to save changes.
STORING RADIO STATION FAVORITES
Radio stations from all bands (AM, FM or SiriusXM
♦
) can be
stored in any order. The number of favorites is displayed
automatically.
1. Tune in a radio station.
2. Touch Hold to set.
SIRIUSXM® WITH 360L
♦
The personalized content of SiriusXM with 360L offers over
200 channels, including ad-free music, sports, comedy, talk and
news, along with access to On Demand shows, performances
and interviews. Certain features require a SiriusXM
subscription and a Connected Access plan. See siriusxm.com
and onstar.com for details.
AUDIO SOURCES
Audio sources may include radio stations, a USB connection, or
a paired Bluetooth device.
1. From the Home page, select the Audio icon.
2. Touch Source.
3. Select the desired audio source.
See Infotainment System in your Owner’s Manual.
INFOTAINMENT SYSTEM FEATURES
♦Optional equipment
†Google built-in services are subject to limitations and availability may vary
by vehicle, infotainment system and location. Select service plan required.
Certain Google actions and functionality may require account linking. User
terms and privacy statements apply. Google, Google Play, and Google
Maps are trademarks of Google LLC.
Some equipment shown may not be included in your vehicle.

10
BLUETOOTH® SYSTEM
Read your Owner's Manual for important information about using the
Bluetooth system while driving.
To use a Bluetooth-enabled device, it must be paired with the
in-vehicle Bluetooth system. Not all devices will support all
functions. The vehicle must be stopped to pair a device.
PAIR A PHONE
1. To use voice control, press the Push to Talk button; after
the prompt, say "Pair my phone."
To use the infotainment screen, select the Phone icon >
Manage Phones > Add Phone.
2. From the phone's Bluetooth settings, select the name
shown on the infotainment screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone screen is displayed.
To pair additional phones, go to Settings > Connections >
Phones.
SECONDARY PHONE
Multiple phones can be paired to the Bluetooth system. The
system connects to the phone that is set to First to Connect.
To set the First to Connect phone, go to Settings >
Connections > Phones > Options.
BLUETOOTH VOICE Control
To use your paired phone's compatible voice assistant, such
as Siri or Google Assistant, press and hold the Push to
Talk button (long press) on the steering wheel.
See Infotainment System in your Owner’s Manual.
APPLE CARPLAY® AND ANDROID AUTO™†
♦
Apple CarPlay or Android Auto capability is available through
a compatible smartphone using the Apple CarPlay or Android
Auto icon on the Home page.
1. There are two ways to set up device projection:
• Wireless Connection – Connect your phone by pairing
it to the in-vehicle Bluetooth system. Turn on wireless
Apple CarPlay or Android Auto in your phone’s settings.
• Wired Connection – Connect your phone to a USB data
port using the USB cable provided with your phone.
Aftermarket cables may not work.
2. Follow the instructions on the infotainment screen and
phone.
3. The Apple CarPlay or Android Auto icon will illuminate when
connected. Touch the icon to have your apps displayed.
To exit Apple CarPlay or Android Auto, press the Home
button. To return to Apple CarPlay or Android Auto, press
and hold the Home button.
To disconnect wireless projection, go to Settings >
Connections > Phones > Options.
See Infotainment System in your Owner’s Manual.
INFOTAINMENT SYSTEM
FEATURES
†Android and Android Auto are trademarks of Google LLC; Apple CarPlay is
a trademark of Apple Inc. User terms and privacy statements apply.

11
WI-FI® HOTSPOT
VEHICLE CUSTOMIZATION
WIRELESS PHONE
CHARGING
Many vehicle features
can be turned on/off
and customized using
the Settings menus on
the infotainment screen,
including Remote Start,
Power Liftgate, Auto
Heated/Ventilated Seats,
Safety Alert Seat, Mirror
Folding, Wipers and
others.
1. Touch Settings on the Home page.
2. Select the Vehicle menu.
3. Select the desired feature and setting.
4. Touch Back to exit each menu.
See Infotainment System in your Owner’s Manual.
The wireless phone charging system is located in the center
console. To check device compatibility, visit
cadillac.com/support. See your phone retailer for required
phone accessories or
charging adapters.
1. The vehicle must be on
or Retained Accessory
Power must be active.
2. Remove all objects
from the charging
pocket.
3. Place the phone,
screen up, in the
pocket.
4. The battery charging symbol will display on the
infotainment screen. If not charging, remove the phone for
3 seconds and rotate it 180 degrees before reinserting it in
the charging pocket.
See Instruments and Controls in your Owner’s Manual.
With the vehicle’s available built-in Wi-Fi hotspot, up to 7
devices (smartphones, tablets and laptops) can be connected
to high-speed Internet. For information on use and system
limitations, visit cadillac.com/support.
To retrieve the name and password for the hotspot, select
the Wi-Fi Hotspot icon on the infotainment screen.
See Infotainment System in your Owner’s Manual.
The Universal Remote System on the overhead console
enables your vehicle to control 3 different devices, ranging
from garage doors and gates to home lighting. Go to
homelink.com for detailed videos and instructions on how
to program the Universal Remote System. For additional
assistance, call 1-800-355-3515.
See Instruments and Controls in your Owner’s Manual.
UNIVERSAL REMOTE
SYSTEM
♦Optional equipment Some equipment shown may not be included in your vehicle.

12
A. CRUISE CONTROL
ADAPTIVE CRUISE
CONTROL SUPER CRUISE
Note: Refer to the Super Cruise Convenience
& Personalization Guide, and Driver Assistance
Systems on page 16, for more information.
On/Off
SET– Set Speed
With Cruise Control on, press the
switch down to set a speed.
RES+ Resume Speed
With Cruise Control on, press the
switch up to resume the set speed.
Adjust Speed
With a cruise speed set, press the
switch up or down to the detent to
increase (+) or decrease ( – ) the set
speed by 1-mph increments; fully press
the switch past the detent to increase
or decrease the set speed to the next
5-mph interval on the speedometer.
Cancel
Press to cancel Cruise Control without
erasing the set speed from memor y.
Press and hold to switch between
Cruise Control and Adaptive Cruise
Control.
Follow Distance Gap
(Adaptive Cruise Control)
Press to select a targeted gap setting of
Far, Medium, or Near — the time between
your vehicle and a vehicle detected
directly ahead.
Super Cruise
Press to engage/disengage Super Cruise
(Adaptive Cruise Control must be set.)
Note: Always pay attention while driving and when
using Super Cruise. Do not use a hand-held device.
Visit cadillac.com/supercruise for full details.
See Driving and Operating in your Owner’s Manual.
B. HEATED STEERING WHEEL
On/Off
See Instruments and Controls in your Owner’s Manual.
C. VOICE CONTROL
Push to Talk
Press to start voice control. Press and hold
to use your paired phone's compatible voice
assistant (Siri or Google Assistant)
End Call/Mute
Press to end or decline a call. Press to
mute/unmute the vehicle speakers.
See Infotainment System in your
Owner’s Manual.
D. AUDIO/PHONE
CONTROLS
+ – Volume
Press the switch up +or down –to
adjust the volume.
Next/Previous
Press or to go to the next or
previous favorite radio station or track
of media source.
Audio
Press to view the audio source.
Phone
Press to answer an incoming call.
See Infotainment System in your
Owner’s Manual.
E. DRIVER INFORMATION
CENTER CONTROLS
Select/ Scroll
Press the switch up or down to move
through the active menu.
Press the switch to open a menu, select
or reset an item, or clear a message.
See Instruments and Controls in your Owner’s Manual.
STEERING WHEEL CONTROLS
E
B
A
C
D

13
CLIMATE CONTROLS
ON/OFF
Power
On-Off
A/C /
Air Conditioning
On-Off/Heat
On-Off
Driver’s
Temperature
Control
(lift up/press
down)
/ /
Airflow
Delivery
AUTO
Automatic
Operation
Recirculation
Mode
Fan Speed
(lift up/press
down)
MAX
/
REAR
Max Defrost/Rear
Defog, Heated
Outside Mirrors,
Heated Wiper Park
Passenger’s
Temperature
Control
(lift up/press down)
AUTOMATIC OPERATION
Press the AUTO switch. The system automatically controls
the fan speed, air delivery, air conditioning and recirculation
to reach the set temperature.
CLIMATE DISPLAY
Select the Climate icon on the infotainment screen to view
and adjust the fan, air delivery, air conditioning, temperature
and Sync (synchronized temperature) settings.
CLIMATE SETTINGS
Use the fan only to distribute air through the cabin without
active electric heating/cooling (Heat and A/C indicators are
off) for increased efficiency.
Select Heat or A/C (Heat or A/C indicator is on) for active
electric heating/cooling. This setting uses more energy.
See Climate Controls in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.

14
RECALL FRONT SEAT MEMORY POSITIONS
Press and hold button 1, 2 or Exit until the set position
is reached.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/off (for exit recall,
the driver’s door must be opened).
To set the recall options, go to Settings > Vehicle > Seating
Position > Seat Entry Memory and Seat Exit Memory.
RECLINE THE REAR SEAT
To recline the
seatback, pull the
lever (A) on top of the
seatback and move
the seatback to the
desired position.
Release the lever.
FOLDING REAR SEAT
Pull the lever (A) on
the top of the
seatback and fold the seatback forward. A red tab near the
lever is visible when the seatback is unlatched.
To fold a rear seat from the cargo area, press and hold the
left or right Seat Release button on the side trim of the
cargo area.
To raise the seatback, lift it up until it locks in place.
See Seats and Restraints in your Owner’s Manual.
SEAT FEATURES
FRONT SEAT ADJUSTMENTS
A. Seatback Recline
B. Seat Adjustment
C. Lumbar Support/
Seat Massage
♦
FRONT SEAT
MASSAGE
Rotate the feature
select knob (C) on the
door panel to view massage settings on the infotainment
screen. Move the knob (up, down, left, right) to adjust the
selected setting.
Press the feature select knob (C) on the door panel to
activate the most recent massage setting or turn off the
active massage.
SET FRONT SEAT MEMORY POSITIONS
With the vehicle powered on or in Accessory mode:
1. Adjust the driver’s seat, power steering column and power
outside mirrors to the desired positions.
2. Press and release the SET button on the driver’s door. A
beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps
sound. Use the button that matches the Driver Information
Center welcome message indicating driver 1 or 2.
To store seat and power steering column positions for
exiting the vehicle, repeat the steps using the Exit
button.
CA
B
A

15
OPEN/CLOSE THE POWER LIFTGATE
Press the Power
Liftgate button on the
Remote Keyless Entry
transmitter (key fob)
twice to open or close.
Press the Power
Liftgate button (A) on
the driver's door panel
to open or close.
Press the lower part of
the rear Cadillac Crest
to open.
Press the button (B)
next to the liftgate
latch to close.
HANDS-FREE
OPERATION
To open or close the
liftgate hands-free, kick
your foot straight
under the left side of
the rear bumper. The
RKE transmitter must
be within 3 feet of the
liftgate. The Cadillac
logo is projected on the
ground near the rear
bumper, indicating the
kicking motion location.
The logo is shown for 1
minute, depending on
operating conditions.
PROGRAMMING THE LIFTGATE HEIGHT
1. Open the liftgate. Adjust it manually to the desired height.
2. To save the setting, press and hold the button (B) next to
the liftgate latch until the turn signals flash and a beep
sounds.
See Keys, Doors and Windows in your Owner’s Manual.
The hood release handle is located under the left side of the
instrument panel.
1. With the driver's door open, pull and release the handle, and
then pull the handle again to open the hood.
2. Lift the hood at the front of the vehicle.
See Vehicle Care in your Owner's Manual.
The power sunshade
controls for the glass
roof are located on the
overhead console.
Press and release the
Sunshade Open
switch to express-open
the sunshade. Press
the switch again to
stop the sunshade.
Press and release the Sunshade Close switch to
express-close the sunshade. Press the switch again to stop
the sunshade.
See Keys, Doors and Windows in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.
POWER LIFTGATE POWER LIFTGATE
HOOD OPENING
GLASS ROOF
A
B

16
DRIVER ASSISTANCE SYSTEMS
To turn the following driver assistance systems on/off or to
change the system settings, go to Settings > Vehicle >
Collision/Detection Systems on the infotainment screen.
SAFETY ALERT SEAT – The driver’s seat cushion pulses
– left, right, or both sides — to alert you of the direction of
potential hazards. Audible alerts may be selected instead.
FORWARD COLLISION ALERT – The Vehicle Ahead
indicator is green on the instrument cluster when a vehicle is
detected and is amber when following a vehicle ahead much
too closely. When approaching a detected vehicle directly
ahead too rapidly, a red alert flashes on the windshield and the
Safety Alert Seat pulses or rapid beeps sound (if selected).
Press the Forward Collision Alert button on the
steering wheel to set the alert timing to Far, Medium, or
Near.
ENHANCED AUTOMATIC EMERGENCY BRAKING – The
system works with Forward Collision Alert to help you avoid
or reduce the severity of front-end collisions with a detected
vehicle you're following. Radar and camera technology are used
to automatically provide hard emergency braking or enhance
the driver's hard braking.
FRONT PEDESTRIAN BRAKING WITH BICYCLIST
DETECTION – During daytime driving, the system detects
pedestrians and bicycles directly ahead and displays an amber
indicator on the instrument cluster. When approaching a
detected pedestrian or bicycle too quickly, a red alert flashes
on the windshield and the Safety Alert Seat pulses or rapid
beeps sound (if selected). The system may automatically
provide hard emergency braking or enhance the driver’s hard
braking. Nighttime and low-visibility performance are limited.
BLIND ZONE STEERING ASSIST – The system works to
help you avoid a potential collision with a detected vehicle in an
adjacent lane.
While driving, the system displays a warning symbol on
the left- or right-side mirror when a moving vehicle is detected
rapidly approaching or is in that side blind zone. The warning
symbol flashes if a turn signal is activated when a vehicle has
been detected on the same side.
To help avoid collisions due to unintentional lane departures,
the system may gently turn the steering wheel as the vehicle
approaches a detected lane marking. The green Lane Keep
Assist indicator will turn amber. If active driver steering is not
detected, the amber indicator may flash, and the Safety Alert
Seat may pulse or beeps may sound (if selected) on the side of
the departure direction, as the lane marking is crossed. Alerts
do not occur when using the turn signal or intentional lane
departure is detected.
If a vehicle is detected in the adjacent lane that you are
entering, the system provides an urgent steering wheel turn to
alert you to take action and the Safety Alert Seat may pulse or
beeps may sound (if selected). The green Lane Keep Assist
indicator will turn amber and the warning symbol will flash
on the left- or right-side mirror.
The system does not continuously steer the vehicle; the driver
needs to steer and be in complete control of the vehicle.
To turn on or off, press the Lane Keep Assist button
on the left side of the instrument panel.
See Driving and Operating in your Owner’s Manual.
Safety or driver assistance features are not a substitute for the driver’s responsibility to operate the vehicle in a safe manner. The driver should remain atten-
tive to traffic, surroundings and road conditions at all times. Visibility, weather and road conditions may affect feature performance. Read your Owner’s Manual
for important feature limitations and information.

17
HD SURROUND VISION – Rear, front or side high-definition
camera views, along with a view of the area surrounding the
vehicle, are displayed on the infotainment screen when the
vehicle is in Reverse
or Drive below 8 mph.
Camera view buttons
are on the screen.
HD Surround Vision
also can be
activated by
selecting the
Camera icon on the
infotainment screen.
REAR PEDESTRIAN ALERT – During daytime driving with the
vehicle in Reverse, the system can detect pedestrians directly
behind the vehicle and will display an amber indicator on the
infotainment screen. When a pedestrian is detected close to
the vehicle, the indicator flashes red and the Safety Alert Seat
pulses or rapid beeps sound (if selected). Nighttime and low-
visibility performance are limited.
REVERSE AUTOMATIC BRAKING – In detected, potentially
imminent collision situations with some objects behind your
vehicle when in Reverse, the system provides alerts and hard
emergency braking, if you have not already done so, to help
reduce the severity or help avoid collisions at very low speeds.
REAR CROSS TRAFFIC BRAKING – W hen in Reverse, the
system warns of detected cross-traffic coming in either
direction by displaying a red alert on the infotainment screen
and pulsing the left or right side of the Safety Alert Seat or
sounding beeps (if selected). The system may automatically
provide hard emergency braking, if you have not already
doneso.
DRIVER ASSISTANCE
SYSTEMS
DRIVER ASSISTANCE
SYSTEMS
REAR CAMERA MIRROR
FRONT AND REAR PARK ASSIST – During low-speed parking
maneuvers, the system provides “distance to closest object”
information on the instrument cluster and the Safety Alert
Seat pulses or a beep sounds (if selected). When an object is
very close, the Safety Alert Seat pulses or 5 beeps sound (if
selected).
See Driving and Operating in your Owner’s Manual.
The Rear Camera Mirror
provides a wider, less-
obstructed field of view
than a traditional mirror
to assist when driving,
changing lanes and
checking traffic conditions.
A. On/Off
Pull or push the lever
at the bottom of the mirror to
turn the video display on or off.
B. Selection Control
Press and release the button to select the brightness, zoom,
or tilt setting.
C. Adjustment
Press and release either button to adjust the selected
setting.
Rotate the Rear Camera control band on the turn signal
lever to spray washer fluid on the Rear Camera Mirror lens.
See Keys, Doors and Windows in your Owner's Manual.
AB C
Some equipment shown may not be included in your vehicle.

18
CHARGING
CHARGING APP
Touch the Charging icon on the infotainment screen to
open the Charging app. Select the Next Charge, Charge
Assist, Schedule or Settings tab to display the desired
charging information.
Next Charge – Select Charge Now to begin charging
immediately upon plug in or Charge Later for delayed charging.
Options include setting the target charge level, time selector,
and cabin pre-conditioning.
Charge Assist – View nearby charging stations, set favorite
charging stations, create and save routes, and manage charge
provider accounts. Charge Assist requires a myCadillac mobile
app account.
Schedule – Set options for the charge level and a schedule
for when to charge each day of the week. With a schedule set,
charging can occur during off-peak times at a lower cost. On
unscheduled days, the vehicle will charge immediately upon
plug-in.
Settings – Enable custom settings for several features,
including Home Charge Location, Notifications, DC Fast Charge
Battery Conditioning, Cabin Pre-Conditioning Temperature, and
Preferred Charge Times.
VEHICLE INFORMATION
Touch the Vehicle Info icon on the infotainment screen to
view details about the vehicle’s energy use and how to
maximize efficiency.
CHARGING STATUS
The charging status indicator on the top of the instrument
panel shows the current charging status of the vehicle.
Solid blue indicator –
Successful initial plug-
in connection.
Flashing green
indicator and single
tone – Vehicle is
plugged in; battery
is charging. Flashes
indicate current
percentage of battery
charge. As the vehicle
charges, the flashes will be longer, showing a higher state of
charge.
Slow (long pulse) flashing blue indicator with double tone –
Vehicle is plugged in; battery charging is delayed.
Solid green indicator – Vehicle is plugged in; battery is fully
charged.
Flashing red indicator – Vehicle is plugged in; not charging.
Check the charge cord connection.
No light – Vehicle is not plugged in OR there is an issue with
the charger or outlet.
No light and three tones – The charge port door is open.
See Driving and Operating in your Owner’s Manual.

19
CHARGING
START CHARGING
1. With the vehicle
in Park, select the
Charging icon to
review the selected
charge mode and
charge cord limit.
The 8-amp charge
cord limit should be
used until a qualified
electrician inspects
your facility’s electrical circuit capacity, or if the electrical
circuit or outlet capacity is not known.
Note: If a home charge location is not set, the charge level selection
returns to the 8-amp setting each time the vehicle is driven.
2. Plug the charge cord into an electrical outlet. DO NOT
PLUG INTO AN EXTENSION CORD.
3. Press the Cadillac Crest (A) on the charge port door,
located just behind the driver-side front wheelhouse, to
open it.
4. Plug the charge cord into the charge port.
5. When charging
begins, the charging
status indicator will
flash green and a
single tone sounds.
If the charging
status indicator
flashes red, check
the charge cord
connection and
power supply.
Note: To change the vehicle chirp settings, go to Charging > Settings on
the infotainment screen.
6. Periodically check the electrical outlet/ plug while charging.
Discontinue use if the electrical outlet/plug is hot and have
the outlet serviced by a qualified electrician.
To temporarily override a delayed charge event, remove and
reconnect the charge cord to the vehicle within 5 seconds. It
will begin charging immediately.
END CHARGING
1. When the charging status indicator is solid green, charging
is complete.
2. Unlock the charge cord from the vehicle by pressing the top
latch button and then unplug the charge cord.
3. Press the power charge port door button (B) at the upper-
rear corner of the charge port housing to close the charge
port door.
4. Unplug the charge cord from the electrical outlet.
DUAL-LEVEL CHARGE CORD
The included dual-level charge cord features 120-volt and
240-volt attachment plugs that can charge the vehicle at either
Level 1, 120 volts, or Level 2, 240 volts, up to 32 amps. For
240-volt charging, a NEMA 14-50 outlet is required. When
changing attachment plugs, make sure to fully insert the
attachment plug into the charger body so that the connector
is flush to the charger body.
See Driving and Operating in your Owner’s Manual.
A
B
Some equipment shown may not be included in your vehicle.

20
OWNER PRIVILEGES™
CUSTOMER ASSISTANCE 1-800-458-8006
Cadillac Customer Assistance is available anytime to answer
questions or provide additional information.
myCADILLAC MOBILE APP
Download the myCadillac app to your compatible smartphone
(or device) and, if your vehicle is properly equipped, you can
start or turn off your vehicle, lock or unlock your doors, view
key diagnostic information, set parking information and more.
The app is available on select Apple® and Android™ devices. Service
availability, features and functionality vary by vehicle, device and data
plan. Device data connection required. Visit onstar.com for more details.
Download the mobile app from your compatible mobile device’s app store.
MY CADILLAC ACCOUNT
Create an account at cadillac.com/owners to access
personalized information, including an online Owner’s Manual
and helpful how-to videos; track your service history and
warranty status; manage your OnStar and Connected Services
vehicle plans; review your current Vehicle Diagnostics report
(active account required) andmore.
ROADSIDE ASSISTANCE 1-800-224-1400
TTY Users: 1-888-889-2438
Roadside Assistance provides every Cadillac owner with
the advantage of contacting a Cadillac advisor and, when
appropriate, a Cadillac-trained dealer technician who can
provide on-site services, including towing service, battery
jump-starting, lock-out service and flat tire assistance. Services
are provided for up to 6 years/70,000 miles, whichever
occurs first.
OnStar®Roadside Assistance
If you have a current OnStar Safety & Security plan, press the
blue OnStar button or red Emergency button (emergencies
only) to get the help you need. An OnStar advisor will use GPS
technology to pinpoint your vehicle location and contact the
nearest service provider.
To learn more about OnStar services, press the blue OnStar
button, visit onstar.com, call 1-888-4-ONSTAR
(1-888-466-7827), or refer to your Owner’s Manual.
Some equipment described in this guide may not be included in your vehicle. Contact your dealer for details on a specific
vehicle. All information contained in this guide is based on the latest information available at the time of printing and
is subject to change without notice. Certain restrictions, precautions, and safety procedures apply to your vehicle.
Please read your Owner’s Manual for complete instructions. Copyright 2022 General Motors LLC. All Rights Reserved.
We recommend always using ACDelco or GM Genuine Parts.
85116514 A