Calypso Watches SMARTIME K8500 User manual

USERS MANUAL K8500
Thank you for choosing our Calypso Smartime watch. With the help of this manual you will gain a
comprehensive understanding of the use and operation of the device.
We reserve the right to amend the contents of this manual without prior notice.
1. Watch Function Description
1.1 Touch button:
A: Press and hold the power button for 3 seconds to turn on the device when the power is off.
B: Press the power button repeatedly to browse the different functions. Press and hold the button to confirm the
choice of function.

1.2 Charging instructions:
Please take care when connecting the watch, see hereafter how to connect correctly.
Important: Of the two ends of the watch strap, only one is the USB connection. Do not use the other end as it
may damage the watch.
1.1 Standby dial interface
1) By repeatedly pressing the power button you can change functions.
2) Browse the functions and select the desired one by pressing and holding the power button.
1.2 Step counter
The step counter is initiated automatically and gives details of the current number of steps made. All data is
reset daily at 00:00.
1.3 Heart rate
To monitor your heart rate, adjust the watch correctly on the wrist (on either hand) and select the heart rate
function. Connecting the watch to the Calypso APP will synchronize the heart rate data with the APP in real time.
1.4 Blood pressure
To measure blood pressure, adjust the watch correctly on the wrist (on either hand) and select the blood
pressure function. Connecting the watch to the Calypso APP will synchronize the blood pressure data to the APP.
1.5 Multi Sport Mode (walking, running, cycling, mountaineering, swimming, football, basketball, table tennis,
badminton, history)
1.5.1 Select the corresponding sports mode; once enabled, the display of information regarding the sports
activity appears, maintain the button pressed to pause at any time: press the button to continue the activity
tracking; click stop to save the data. The movement record can be viewed in the history.
1.5.2 Activity data will start to be saved only when the distance covered is greater than 200 meters or the
motion time is greater than 5 minutes; when the activity condition is not fulfilled a ‘data is too little to be saved’
alert appears.
1.5.3 After the watch synchs to the Calypso APP, selecting the sports history interface in the Calypso APP
will synchronize the movement history data from the watch and you can view the detailed data in the Calypso
APP.
1.6 Sleep Monitoring
The Sleep monitoring time runs from 21:00 to 09:00 the next day and the data generated by the watch is sent to
the Calypso APP when synchronized.
1.7 Set up
1.7.1 Alarm
The alarm can be set on the Calypso APP which then synchronizes to the watch.

1.7.2 Find mobile phone
Once the watch is paired with the mobile phone via the APP, click ‘Find the mobile phone’on the smartwatch and
your mobile phone will start ringing.
1.7.3 Stopwatch
Enter the stopwatch function via the power button. Then use the button to start and stop the timing.
1.7.4 Sedentary reminder
Set the start and end time period and sedentary interval (minutes), threshold (steps), click to enter the repeat
setting to select the sedentary reminder date (week), when the sedentary time arrives, the wristband vibrates
and the sedentary reminder icon appears.
1.7.5 Remote photo
After the smart watch binds to the APP：
1）Click on the Remote Shutter in the app. The watch displays the remote photo icon and the mobile phone
automatically initiates the camera. To take a photo with the mobile phone, simply click on the power button.
1.7.6 Music control
Music on the mobile phone can be played, paused and songs can be changed via the watch when the APP is
bound with the smartwatch.
1.7.7 About
Here you can consult the Bluetooth name of the smartwatch as well as the Bluetooth address and version
number
1.7.8 Restoration of factory settings
Click to restore the factory settings and the smartwatch is restored to the factory settings.
1.7.9 Shutdown
Click the shutdown option to turn off the watch.
1.8 Notifications
Activate notifications in the APP to automatically receive notifications on the smartwatch, which can store up to
8 messages. After that, new ones will substitute older messages.
Press power button to delete all messages.
1-Binding APP
1.1 Application e-store search and download
Android (version 4.4 onwards): Android, google play or others to search 'Calypso' to download.
iOS (version 9 onwards): Search for 'Calypso' download in APP Store to download
-Android phone：'Calypso'
Once the installation is completed, the following app icon is shown：
-iOS phone：'Calypso'
Once the installation is completed, the following app icon is shown：

2 Connecting Bluetooth
2.1 Unconnected state：grey
Once the smartwatch is turned on, the Bluetooth is always in search status, and after the APK/ APP is on, click
'more' and connect to the device, click 'search' and the corresponding smartwatch device name is selected, so
that the smartwatch and the APP can be bound successfully.
Should the watch not be found by the mobile phone, please revise your phone's location settings.
2.2 Binding APP state：blue
Watch time synchronization: once the watch and APP are successfully bound, the watch and mobile phone are
synchronized.
2.3 Find device
You can activate the vibrator on your smartwatch from the app by pressing ‘more’ then ‘Find device’. This will
allow you to find your smartwatch if you have lost it as long as your smartwatch is still connected to your phone.
2.4 Data synchronization
With the smartwatch successfully bound to the app, health data collected by the watch can be sent to the APP.
Turn on the heart rate, sleep, exercise interface, click the selected date, click on the upper right corner icon, you
can successfully share the current interface data to QQ, QQmoments, WeChat, WeChat moments,
Facebook,Twitter and so on.
2.5 Push message
When the smartwatch is connected to the mobile phone you can activate notifications on your watch from
third-party applications. In the APP, go to 'more'- 'App notification settings' to turn on the third-party application
you would like to receive notifications from.
2.5.1.Incoming call
By turning on the call notification in personal application, when one or more calls are received on the mobile
phone, the watch will simultaneously receive one / more call reminders.
2.5.2.SMS notification
Turn on SMS notification in personal application and when the mobile phone receives one or more SMS, the
watch will receive one / more SMS reminder at the same time.
2.5.3.Additional Application Message Notification
The corresponding application message notification switch is opened in the personal application, such as WeChat,
QQ, Facebook, Twitter,etc, and when the mobile phone terminal receives one/ more application message
notifications, the smartwatch terminal receives one or more corresponding message reminder notifications at
the same time.
2.6 Water-drinking reminder
Set the start and end time for the period and frequency (minutes), click enter repeat settings to select the ‘drink
water’ reminder date (week), check the drinking water reminder and save. When the water warning time is
reached, the watch vibrates and drinking icon appears.
2.7 Sedentary reminder
Set the time interval from start to end and sedentary interval (minutes), threshold (number of steps), click enter
repeat setting to select sedentary reminder date (week), when sedentary time reaches, the end of the
smartwatch vibrates and has a sedentary reminder icon.
2.8 Alarm clock reminder
Click the alarm clock reminder for setting to add the alarm time. When the alarm clock time is reached, the

alarm clock icon and time are displayed and the smartwatch vibrates.
2.9 Reminder mode
3 modes for notifying user:
In addition to drink water/alarm clock/sedentary alarm, you may choose how the smartwatch should notify you
for other alarms.
Mode 1, only screen ON bright.
Mode 2, only vibration
Mode 3, screen + vibration
2.10 Heart rate test
Set the time period from start to end, check the heart rate detection switch and save it.
2.11 Firmware upgrade
The version of the watch firmware is monitored to verify if the latest version is installed and prompts for updates
will appear when there is a new version to keep the watch updated.
2.12 Unbinding
When the watch is bound to the APP, click on the connected device name or left slide to unbind the watch and
the APP. The iOS system also needs to ignore the matched device from the smartphone settings.
HOW THE CALYPSO SMARTIME APP WORKS
1. Connecting the watch to the app
In the More menu select +Add device and connect the watch. Once connected, the data
from the watch synchronizes with the app. Every time the the app is launched there is
an automatic data exchange.
2. The Me menu
2.1 Create your profile
Open the ‘Me’menu.
Press the image "Not set yet" to fix avatar.
Fill out all the required information.
2.2. Today.
Three types of information are displayed here: steps, distance covered y calories burned (vs. yesterday –
compared to day before).
2.3 Personal best.
Slide to the left to see three types of indicator: Personal best, Average and Last Week.
3. Analysis
3.1 Two options:

Here are the Steps and Sleep menus with details of the last 7 days.
Steps: daily step average & total steps in a week.
Sleep: daily sleep average & total hours of sleep in a week.
- Further data on steps and sleep can be found by expanding the box next to the Sports and Sleep options, with
details of the last month, last six months and last year.
Steps - The information given includes average daily steps, total steps, percentage of target completed and total
distance covered.
Sleep –here are the details of total time slept, the amount of light and deep sleep time and the average nightly
sleep time.
Regular synchronization of the data held on the watch is recommended by tapping the icon at the top left of the
app). The icon at the top right allows the sharing of information via social media.
4. Sports
Corresponding to the centre button at the bottom of the screen.
5 sub options: Sports (Walking, Outdoor walking, Indoor running, Rambling, Outdoor
running, Half marathon, Marathon), Steps, Sleep, Heart rate, Blood pressure.
4.1. Sports:
Pace, Km/minute, Activity duration, calories burned, elevation change (height in
metres covered). Change the sport required by pushing the icon on the top left.
4.2 Steps:
Daily steps covered. Tapping the chequered flag gives the option to fix a step goal, which then appears in centre
circle as the overall goal; other information shown here includes daily steps made, and percentage of goal
reached. The calories burned, activity time and distance covered are also given.
4.3. Sleep:
Here the daily sleep details can be found. In the centre are the total hours slept and the
quality of the sleep. At the screen top previous sleep history can be consulted using the
arrows. Towards the bottom of the screen are the hours of deep and light sleep and
together with the total duration.
4.4 Heart:
Here you can visualize the results of the last time the heart rate was measured with
details of the average, the maximum and the minimum heart rate levels.
4.5. BP:
Shows data on shrinkage, diastolic and pulse blood pressure.
5. Report
5.1. Activity report graph showing hourly step rate.
5.2. Activity report graph showing daily sleep information.
5.3. Heart rate report showing graph with the minimum, the maximum and the average
rates.
5.4. Blood pressure report with graph showing shrinkage, diastolic and pulse blood
pressure.

FREQUENTLY ASKED QUESTIONS
-The watch should not be exposed to prolonged exposure to extreme temperatures (too cold or too hot) which
can cause permanent damage.
- Why can't I wear a smartwatch to take a hot bath?
With the difference in the temperature of the bath water and the outside air, water vapor can be generated.
This vapor, in gas form, may enter the watch through the gap in the casing of the watch. When the temperature is
lowered, the liquid droplets are re-formed and the circuit inside the watch may be damaged, thus damaging the
circuit board and the correct functioning of the watch.
-The watch wont launch or charge.
If you receive the watch and cannot launch it, there may have been a collision during transport. The battery
precision board is protected so plug in the watch to charge and activate it.
If the battery charge is too low, or if the watch has not been used for a long time, the watch may not start up. In
this case please plug in the data cable and charge it for more than half an hour to activate.
DISCLAMER
The method of capturing the heart rate through an optical sensor used by this Calypso watch does not reach the
level of precision and accuracy of a professional medical device, nor can it guarantee the equivalent stable
readings. The watch cannot replace a medical device in its function of detecting or diagnosing pathologies, heart
or other diseases.
Consequently, with respect to this function, the device is for recreational use only. Multiple factors (including
level of skin contact, pigmentation, tattoos, sudden arm movements etc) can alter the accuracy of the data
provided by the sensor. Therefore, keep in mind that the actual heart rate may be higher or lower than the
reading indicated by the optical sensor at a given time.
If you suspect any anomaly, always consult your doctor and in case of emergency, immediately contact the
emergency services in your area.
CALYPSO assumes no responsibility for any claim that may arise from the use and / or interpretation that the user
of the device and / or third parties may make of the heart rate information provided by their devices.
WARRANTY INSTRUCTIONS
1．The motherboard is guaranteed for two years from the date of purchase. The battery and charger are
covered for six months. The strap is not covered by this warranty.
The guarantee covers any problem experienced when the product is used normally if there is a product quality
issue caused by manufacturing, material or design defect.
2．The warranty does not cover failures caused by personal reasons of the user, for example:
1). Damage caused by the unauthorized disassembly and assembly, modification of watches, etc.
2). A malfunction caused by accidentally dropping during use.
3). Any man-made damage through misuse of a foreign element (such as: hot water, external force shattering,
damage to peripheral components, etc.) is not covered by the warranty.
3. When requesting a warranty repair, a fully filled out warranty card must be provided with the date of purchase
and the stamp of the place of purchase.
4. In case of doubt please contact the point of sale or a qualified after sales service should a repair be needed.

MANUAL DEL USUARIO K8500
Gracias por escoger nuestro reloj Calypso SmarTime. Con la ayuda de este manual usted comprenderá el
funcionamiento y uso del dispositivo.
Nos reservamos el derecho de modificar los contenidos de este manual sin previo aviso.
1.Descripción de las funciones del reloj
1.1 Botón táctil
A: Pulse y aguante el botón principal durante 3 segundos para poder encender el dispositivo cuando esté
apagado.
B: Presione el botón de encendido varias veces para explorar las diferentes funciones. Mantenga presionado el
botón para confirmar la elección de la función.
1.2 Instrucciones de carga:
Tenga cuidado al conectar el reloj; consulte la forma correcta de carga a continuación.
* Tenga en cuenta que, de los dos extremos del reloj, solo uno es el USB. No lo cargue por el otro lado ya que
puede provocar un cortocircuito.
1.1 Interfaz de marcación en espera

1) Pulsando el botón de encendido puede cambiar las funciones.
2) Mantener pulsado el botón de encendido para seleccionar la función. Elija la función deseada y mantenga
presionado el botón para seleccionarla.
1.2 Contador de pasos
El contador de pasos se inicia automáticamente y proporciona detalles del número actual de pasos realizados.
Todos los datos se restablecen diariamente a las 00:00.
1.3 Frecuencia cardíaca
Para controlar su ritmo cardíaco, ajuste el reloj correctamente en la muñeca con cualquier mano y seleccione la
función de ritmo cardíaco. Conecte el reloj a la aplicación Calypso y los datos de frecuencia cardíaca se
sincronizarán con la aplicación en tiempo real.
1.4 Presión arterial
Para medir la presión arterial, ajuste el reloj correctamente en la muñeca (mano izquierda o derecha) y
seleccione la función de presión arterial. Conecte el reloj a la aplicación Calypso y los datos de presión arterial se
sincronizarán con la aplicación.
1.5 Modo multideportes (caminar, correr, ciclismo, montañismo, natación, fútbol, baloncesto, tenis de mesa,
bádminton, historia)
1.5.1 Seleccione el modo deportivo correspondiente haciendo clic y esperando 3 segundos; una vez
habilitado, aparece la visualización de información sobre la actividad deportiva, mantenga presionado el botón
para pausar en este momento: haga clic en el botón inferior para continuar el movimiento; guardar el
movimiento de detención de datos puede hacer clic directamente en el botón de pausa a continuación y hacer
clic en detener para guardar los datos. El registro de movimiento se puede ver en la historia.
1.5.2 Los datos sobre el movimiento se pueden guardar cuando la distancia recorrida es superior a
200 metros o el tiempo de movimiento es superior a 5 minutos; cuando no se cumple la condición de
movimiento, aparece una alerta de "los datos son demasiado pequeños para ser guardados".
1.5.3 Después de que el reloj se sincronice con la aplicación Calypso, al seleccionar la interfaz del
historial deportivo en la aplicación Calypso se sincronizarán los datos del historial de movimientos del reloj y
podrá ver los datos detallados en la aplicación Calypso.
1.6 Monitor del sueño
El tiempo de monitoreo del sueño se extiende desde las 21:00 hasta las 09:00 del día siguiente y los datos
generados por el reloj se envían a la aplicación Calypso cuando se sincronizan.
1.7 Configurar
1.7.1 Alarma
La alarma se puede configurar en la aplicación Calypso que luego se sincroniza con el reloj.
1.7.2 Buscar teléfono móvil
Una vez que el reloj esté sincronizado con el teléfono móvil a través de la APLICACIÓN, haga clic en Buscar el
teléfono móvil en el reloj y su teléfono móvil comenzará a sonar.
1.7.3 Cronómetro
Mantenga presionado el cronómetro para ingresar a la interfaz de sincronización, presione prolongadamente el
icono de inicio para iniciar la sincronización.
1.7.4 Recordatorio sedentario
Establezca el período de inicio y finalización y el intervalo sedentario (minutos), el umbral (pasos), haga clic para
ingresar a la configuración de repetición para seleccionar la fecha de recordatorio sedentario (semana), cuando
llegue el momento sedentario, la pulsera vibra y tiene un icono de recordatorio sedentario.
1.7.5 Foto por control remoto
Después de que el reloj se une a la APLICACIÓN:

1）Haga clic en el obturador remoto en la aplicación. El reloj muestra el ícono de la foto remota y el teléfono
móvil inicia automáticamente la cámara, para tomar una foto con el teléfono móvil, simplemente haga clic en el
botón del reloj.
1.7.6 Control de música
La música en el teléfono móvil se puede reproducir, pausar y las canciones se pueden cambiar a través del reloj
cuando la aplicación está vinculada con el reloj.
1.7.7 Acerca de
Aquí puede consultar el nombre de Bluetooth del reloj inteligente, así como la dirección de Bluetooth y el
número de versión
1.7.8 Restauración de la configuración de fábrica
Haga clic para restaurar la configuración de fábrica y el reloj inteligente se restaurará a la configuración de
fábrica.
1.7.9 Apagado
Haga clic en la opción de apagado para apagar el reloj.
1.8 Notificaciones
Active las notificaciones en la APLICACIÓN para recibir notificaciones automáticamente en el reloj inteligente. El
reloj inteligente puede almacenar hasta 8 mensajes. Después de eso, los nuevos sustituirán a los mensajes más
antiguos.
Presione el botón inferior para eliminar todos los mensajes.
1. APLICACIÓN vinculante
2. 1.1 Búsqueda y descarga de aplicaciones en tiendas electrónicas
Android (versión 4.4 y superior): Android, Google play u otros para buscar 'Calypso' para descargar.
iOS (versión 9 y superior): Busque la descarga 'Calypso' en la tienda de aplicaciones para descargar
-Teléfono Android: 'Calypso'
Una vez que se completa la instalación, se muestra el siguiente icono de la aplicación:
-Teléfono iOS: 'Calypso'
Una vez que se completa la instalación, se muestra el siguiente icono de la aplicación:
2-Conexión Bluetooth
2.1 Estado desconectado: gris
Una vez que el reloj inteligente está encendido, el Bluetooth siempre está en estado de búsqueda, y después de
que el APK / APP esté encendido, haga clic en "más" y conéctese al dispositivo, haga clic en "buscar" y se
seleccionará el nombre del dispositivo del reloj inteligente correspondiente, de modo que el El reloj inteligente y
la aplicación se pueden vincular con éxito.