Calypso CA-1000 User manual

3
www.calypsosystems.com
Making Connections
7
Audio 1
Plug-in the power supply jack into the 12VDC (3.5A) power
socket of the CA-1000.
Connect CH2 mini-audio jack to the CH2 port highlighted to
the left and as shown above.
1
Audio 2
Audio 3
Making Connections
Terminate the 5-pin Phoenix screw-down connector to the
CH1 series-socket (next to 12VDC power port).
4
5
Connect CH3 mini-audio jack to the CH3 port as shown
above.
Head Phones
(optional)
IR Communication
(optional)
6
Serial Communication
Plug-in the headphones to the jack port as shown above.
Audio 4
8
Connect the 4-pin IR Input/Output connector to the 4-pin
socket as shown above.
2
Power
Speakers
Connect the 5-pin Phoenix connector to the speaker series-
socket.
Terminate the 2-pin Phoenix connector to the CH4+/CH4- (Bal)
series-socket as depicted above.
9
Terminate the 3-pin Phoenix connector to the 3-pin socket as
shown in the photo above.
It is the responsibility of the service technician to
correctly prepare cables of proper-size and
length when using the Phoenix connectors pro-
vided.
NOTE: Connection illustrations listed below are
provided with highlighted (in blue) port views.

07.01.09

What’s in the Box
Flow Diagram
2
1
3456
7
The list of components in the box contains the following items from top left to right: (1) 1 CA-1000, (2) 2 6 in. stereo-audio splitter cables, (3) 2 5-pin Phoe-
nix connectors, (4) 1 4-pin Phoenix connector, (5) 1 3-pin Phoenix connector, (6) 1 2-pin Phoenix connector, and (7) 1 3.5A power supply.