Campomatic NT30 titanium User manual
INSTRUCTION MANUAL
Cauon: Read and follow all safety and operang instrucon before rst use of this product.
Campomac S.R.L. Via Congliachi 5/B . 35031, Abano Terme (Padova), ITALIA
WWW.CAMPOMATIC.COM
Made in China
NT30
titanium
nose, ear & beard trimmer
2
hc20w
TABLE OF CONTENT
English ________________________________________ 3
____________________________________________ 6
3
hc20w
ENG
NOSE EAR & BEARD HAIR TRIMMER
4
hc20w
ENG
CLEANING THE TRIMMER:
Be sure that the switch is turned o before removing, assembling or cleaning blades.
1. As shown in the gure, switch trimmer o, remove the outer blade frame by twist-
ing counterclockwise and raising it upward. Wipe the blades with a ssue or
cleaning brush (included) to remove any cut hairs, dust, etc.
2. Place the outer blade back on to the top body by pushing down gently and twist-
ing clockwise.
3. Replace the protecve cap.
OPERATIONS:
1. Remove the baery cover, and place a one AA baery in the appropriate posion.
Make sure to set the right polarity with guidance of the indicang symbol.
2. Close the baery cover.
3. Push the switch buon to ON
IMPORTANT NOTICE:
1. This nose and ear hair trimmer is not suitable for hair or moustache
2. Clean the cung blades with a so brush. Never rinse or immerse in water.
5
hc20w
AR
:
, ”
.
,,-
.
.
-
.
. -
:
.” ΑΑ-
.-
on/-
:
-
.,-
Campomatic S.R.L. Via Configliachi 5/B . 35031, Abano Terme (Padova), ITALIA
WWW.CAMPOMATIC.COM
nt30
Table of contents
Languages:
