Canon EOS 5D Mark III User manual

m
0
Ul
7+
==
CaHOH
S
ark
m
m !
m m
m B
w
Ill

Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file number imprinting.
The print settings will be applied to all print-ordered images. (They
cannot be set individually for each image.)
Setting the Printing Options
Select [Print order].
_ Under the [[_]1] tab, select [Print
order], then press <8>.
_Select [Set up].
_ Select [Set up], then press <_>.
[Print type]
3Set the option as desired.
®_Set the [Print type], [Date], and [File
No.].
_ Select the option to be set, then press
<__>. Select the desired setting,
then press <8>.
[Date] [FileNo.]
305

Digital Print Order Format (DPOF)
Print type
Date
File number --
_) Standard Prints one image on one sheet.
_) Index Multiple thumbnail images are printed on one sheet.
®
_ Both Prints both the standard and index prints.
On
-- [Onlimprints the recorded date on the print.
Off
On [On] imprints the file number on the print.
Off
4Exit the setting.
_ Press the <MENU>button.
_, The print order screen will reappear.
_ Next, select [SeMmage], [Bylk], or
rAil Jrnage] to order the images to be
printed.
#> Even if [Date] and [File No.] are set to [On], the date or file number may
not be imprinted depending on the print type setting and printer model.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-com_oatible printers and photofinishers may not be able to
print the images as you specified, if this happens with your printer, refer
to the printer's instruction manual. Qr check with your photofinisher
about compatibility when ordering prints.
Do not inser[ into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also. depending on the image type, the
print order may not be possible.
] RAW images and movies cannot be print ordered. You can print RAW
images with PictBndge (p.296).
306

Digital Print Order Format (DPOF)
Print Ordering
®_Sel.lmage
Totalimages selected
Select and order images one by one.
If you press the <O, > button and turn the
<_> dial counterclockwise, you can
select an image from a three-image
display. To return to the single-image
display, turn the <_> dial clockwise.
Press the <MENU>button to save the
print order to the card.
[Standard] [Both]
Press <8> and a print order for one
copy of the displayed image will be
placed. By turning the <O> dial, you
can set the quantity up to 99.
[Index]
Press <__> to include images with a
checkmark <,l> in the index print.
Index icon
_ Bym
Select [Mark all in folder] and select the folder. A print order for one
copy of all the images in the folder will be placed. If you select [Clear
all in folder] and select the folder, the print order for that folder will
all be canceled.
®_All image
If you select [Mark all on card], one copy of all the images on the
card will be set for printing. If you select [Clear all on card], the print
order will be cleared for all the images on the card.
_1 ® Note that RAW images and movies will not be included in the print order
even if you set !!Byl/i! or f'AII image.':
® When using a PictBridge printer, print no more !hart 400 images for one print
order. !f you specify more than this, allthe images may not be printed,
307

Direct Printing with DPOF __,...................... ::_:_
With a PictBridge printer, you can easily
print images with DPOF.
_Prepare to print.
_ See page 296. Follow the "Connecting the Camera to a Printer"
procedure up to step 5.
_Under the [i-_1] tab, select [Print order].
_Select [Print].
_ [Print] will be displayed only if the camera is connected to a
printer and printing is possible.
4Set the [Paper settings] (p.298).
_o Set the printing effects (p.300) if necessary.
,,!_Select [OK].
_l_ _ Before printing, be sure to set the paper size.
Certain printers cannot imprint the file number.
If [Bordered] is set, certain printers may imprint the date on the border.
Depending on the printer, the date may appear faint if it is imprinted on a
bright background or on the border
L_ _ Under [Adjust leveJs], [Manual] cannot be selected.
¢_ If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you slop
the printing and any of the following occurs:
*Before resuming the printing, you changed the print order or deleted
print-ordered images.
* When you set the index, you changed the paper setting before
resuming the printing.
*When you paused the printing, the card's remaining capacity was low.
Ira problem occurs during printing, see page 304.
3O8

[-_ Transferring images to a Personal Computer _
You can connect the camera to a personal computer and operate the
camera to transfer images on the card to the personal computer. This is
called direct image transfer.
The direct image transfer can be performed with the camera while
you look at the LCD monitor.
The images transferred to the personal computer will be saved in the
[Pictures] or [My Pictures] folder and organized in folders by shooting
date.
Before connecting the camera to the personal computer, be
sure to install the provided software (EOS DiGiTAL Solution
Disk on CD-ROM) on the personal computer.
For the procedure to install the provided software, see page 395.
Preparation for image Transfer
Set the camera's powerswitch to
<OFF>.
Connect the camera to a personal
computer.
_ Use the interface cable provided with
the camera.
®_Connect the cable to the camera's
<DIGITAL> terminal with the cable
plug's <-_7> icon facing the front of
the camera.
_ Connect the cord's plug to the
personal computer's USB terminal.
309

Transferring Images to a Personal Computer
Set the camera's power switch to
<ON>.
_'_ When the personal computer displays
a screen to select the program, select
[EOS Utility].
_s, The EOS Utility screen will appear on
the personaU computer.
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility's top screen is displayed, [Direct transfer] in
step 5 on page 312 will not be displayed. (The image transfer function will
not be available.)
] #_ If the EOS dtihty screen does not appear, refer to the Software
Instruction Manual (CD-ROM, p.396L
Before disconnecting the sable, turn off the camera. Hold the plug (not
Lhecord) to pull out the cable.
Transferring RAW÷JPEG Images
For RAW+JPEG images, you can specify
which image to transfer. On the next
page in step 2, select [RAW+JPEG
transfer], and select the image to be
transferred: [JPEG only], [RAW only], or
[RAW+JPEG].
310

E-_ Transferring Images to a Personal Computer
Select the images to be Transferred
®_Sel.lmage Select [Image transfer].
®_Under the [[_]2] tab, select [image
transfer], then press <8>.
_Select [image sel.ltransfer].
®_Select [image sel./transfer], then
press <8>.
_Select [Sel.lmage].
_ Select [Sel.lmage], then press <_>.
_:_ Select the images to be
transferred.
_ Turn the <O> dial to select the image
to be transferred, then press <__>.
_ Turn the <0 > dialto display the < _/> on
the screen's upper left, then press <(_>.
_ Ifyoupressthe<O, >buttonandturnthe<_ >
dialcounterclockwise,youcanselectanimage
fromathree-imagedisplay.Toreturntothesingle-
imagedisplay,turnthe<_ >dialclockwise=
® To select other images to be
transferred, repeat step 4.
_ To return to the screen in step 3,
press the <MENU>button.
_when [sei image] is selecte& you can Check the image,s transfer Status
on the upper left of the screen: No mark; Not selected: Se!ecte d for
transfer, x: "Transfer fai!ed.O: Transfer succeeded.
page 310, the procedures for [RAW+JPEG transfer] and steps ! to #
can a!so be performed whi!e the camera !S !0t c0nnected to a persona!
computer,
311

TransferringImagestoa PersonalComputer
5Transfer the image.
® On the computer screen, check that
EOS Utility's top screen is displayed.
® Select[Direct transfer], thenpress<8>.
® On the confirmation screen, select
[OK] and the images will be
transferred to the personal computer.
® Images selectedwith [Sel. IIm] and [AH
image] can also betransferred inthis way.
® Sel.lh
Select [Sel. mm] and select [Folder images net transfer'd]. When
you select a folder, all the images in that folder not yet transferred to
the personal computer will be selected.
Selecting [Folder images failed transl.] will select the selected
folder's images that failed to transfer.
Selecting [Clear folder transl, history] will clear the transfer history
of the images in the selected folder. After clearing the transfer
history, you can select [Folder images net transfer'd] and again
transfer all the images in the folder.
® AH image
If [AH image] is selected and you select [Card images net
transferred], all the images on the card not yet transferred to a
personal computer will be selected.
For a description of [Card images failed transfer] and [Clear
card's transf, history], see "SeL Ik, above.
_[_ _* if any SCreen Other than E0S utiiity'S top SCreen iS displayed on the
personal c0mputer, [Direct transfer] is not displaYed,
® During the image transfer, certain menu options cannot be used.
¢ You Can a!s0 transfer rnQviesl
® Up to 9,999 images can be transferred in one batch.
_} Shooting is possible during the image transfer.
312

Customizing the
Camera
You can customize various camera features to suit your
picture-taking preferences with Custom Functions.
Also, the current camera settings can be saved under
the Mode Dial's <_]>, <Jill>, and <r_> positions.
The features explained in this chapter can be set and
used in the following shooting modes: PITy/AM/M/
B.