Cantrack G02M User manual

1
G02M Smart Pet GPS Tracker
GPS+WIFI+LBS
This device is a water resistance IP65 remote tracking device with built-in
GPS/GSM/GPRS technology. It’s mainly using for pet monitoring and
protecting.

2
SIM card Installation
Prepare a 2G Nano SIM card from the user's local operator.
Insert SIM card and make sure it’s activated with credits
Note: Before installing the SIM card, check if the SIM card has PIN code or not,
if yes, please use a cell-phone to unlock the card's PIN code.
Device Charging
For the first time use, please fully charge the battery for around 3~4 hours
※To get an initial location, use outdoors so the device may fix onto the
satellites.

3
Button & Indicator
●Long pressing button to power on device; Indicator will show off after read
SIM card; if indicator keep flashing represent SIM card not insert properly.
●Long pressing more than 6s until indicator off to power off device.
How to connect toAPP & GPS Platform
If you are using local SIM card, use your phone to send command message to
device’s phone number（Skip this step if use data SIM card from factory）
Step 1: Configure APN
Command: apn123456+space+ApnUserName+space+ApnPassword
Example: apn123456 internet
Notes: Some APN without user name and password, so please leave it blank.
“internet” is the APN from the SIM card provider; make call to your operator to
confirmAPN details.

4
Step 2. Change IP Port(Skip this step if you are using “secumore1”APP)
Command: adminip123456+space+IP/Domain+space+Port
Example: adminip123456 www.gps228.com 8989
Step 3. Check APN & IP, Port
If your device can’t online, send SMS to check device setting,
Command: check123456
GPS Tracking System
Website: www.secumore1818.com
Step 1: Download APP “secumore1”from app store
Step 2: Choose “User/IMEI/Plate No.” login as below photo
Step 3: Use IMEI as user name, password 123456
Step 4: Once configured APN SMS, device will show location:

5
Step 5: Click “More”button →Click “Device Info”button→Click “license
plate”button to change the user name you need to replace IMEI number

6
Step 6: Click “Send Command→Click “Time Interval”button change update
time interval
●If need fast tracking to show accurate location, set time interval “60”
that can last 6hours.
●If when the pet is sleep/static/at home, set time interval “7200”that can
standby 2 days. It will show location not accurate for power saving
purpose.

7
APP Support Geo-fence & History Trace
Trouble Shooting
APP can’t show location
Make sure you configured APN SMS;Activated
GPRS data service for SIM card;SIM card
support 2G network
Indicator keep flashing
Check SIM card insert properly
Location not accurate when
indoor
Indoor: device will locate via LBS/WIFI to
show a roughly location. Please move outdoor
to get GPS signal and Change short time
interval “60”
Location not update in time
even at outdoor
Device is default power-saving mode, you need
change short time interval “60”from APP
command