Cantrack G600L User manual

1
4G Asset GPS Tracker
(G600L)
User Manual
2020.12.8
(V1.1)

2
Attention:
●Please use 4G simcard, make sure GPRS open
●Please put device outdoor or in open area for better GPS signal. Device also support LBS
when indoors(accuracy 100-1000 Meter）.
Parameter
Housing
Size
111x 77x 27mm
Material
ABSfire-prof
Waterprof
IP65
GSM
G600LN
EC-25-AFX
(US/Canada/Mexico)
LTE-FDD：B2/B4/B5/B12/B13/B14/B66/B71
WCDMA:B2/B4/B5
G600LC
EC200S-CN
(China/India)
LTE-FDD:B1/B3/B5/B8
LTE-TDD:B34/B38/B39/B40/B41
GSM :900/1800Mhz
GPS
GPS Frequency
GPS L1 1575.42 Mhz BeiDou 1561.098Mhz
GPS Accuracy
≤5 Meter
Positioning way
GPS/BDS
GSM Module
Quectel BG95(CatM1)
MCU
STM32F103RCT6
GPS Chipset
AT6558R
Speed Accuracy
<0.1M/S
Positioning time
Cold start≤32S Warm start ≤3S
Power
Battery
10000mAh
Standby time
180 Day
Working Currency
80mA
Standby Currency
10uA
Working temperature
-40°C to +85°C
Storage temperature
-20°C to +65°C
Indicator
Light Status
Power ON/OFF
Insert SIM card power on, remove SIM power off
Red light
Power
Flashing: when charging; Constant on: charge full
Green light
GPRS network
Flashing: trying to connect server; Constant on: connect server OK

3
Blue light
GPS signal
Flashing: trying to get GPS signal; Constant on: GPS located OK
Light will turn off after power on 3 minutes, make a call or send any SMS to wakeup light 10s shortly.
How to use device?
Step 1: To power on the device, Insert 4G GSM SIM card (Nano Size) with GPRS data activated. Make
sure remove PIN code if SIM card need.
Step 2: Edit SMS Command send to device SIM number as below one by one
Set IP Port: adminip123456(space)www.gps228.com(space)8989
Set APN: apn123456(space)APN (space)ApnName(space)ApnPassword
Step 3: Go outdoor and keep device vibrating for 5 minutes for get accurate positioning, especially when 1st
time using.
Step 4: Login Platform/APP:
Web: www.secumore1818.com
Android & IOS APP: secumore1
Default to use IMEI number login, password 123456.
QR Code for APP download
IOS Android
Command List
SMS Function
SMS Command format
SMS example
★Please don’t type “+” “space”, password 123456.
★Preset Center Number first if need receive SMS alarm.
★Each SMS must reply “Set OK” represent command successfully.
Step 1 Set IP Port
adminip+password+space+IP
Address+space+port number
adminip123456 www.gps228.com
8989
Step 2 Set APN
apn123456+space+LocalApn+space+Apn
apn123456 tim.br tim tim

4
Name+space+ApnPassword
Get Google link
smslink123456
Set fall-off alarm
remove123456+space+1
remove123456 1
Cancel fall-off alarm
remove123456+space+0
remove123456 0
Set Time Interval
ITV123456+space+time interval(s)
If 60s , send SMS: ITV123456 60
Set center number
centernum123456+space+phone number
centernum123456 13712345678
no need put country code
Cancel center number
centernum123456
Center number use to receive alarm
message
Set low battery alarm
lowbat123456+space+1
lowbat123456 1
Cancel low battery
lowbat123456+space+0
lowbat123456 0
Set SMS time zone
timezone123456+space+(timezone*60)
If+5.5:timezone123456 330
Check device status
check123456
check GPS GSM status
Check current mode
*SPJLX*P:123456*RM:0#
Restart device
reset123456
Set alarm mode
KC123456+space+1
APP alarm (default)
KC123456+space+2
APP+SMS alarm
KC123456+space+3
APP+SMS+PhoneCall alarm
Set vibrate alarm
vibrate123456+space+1
Must keep continuously static 3
minutes before vibration
Cancel vibrate alarm
vibrate123456+space+0
Set factory mode
begin123456
It will erase all setting
Tips: Fall-off alarm: device sticking to the metal cover with magnet, fall-off alarm will be triggered once
device was removed off.
Working modes:
A.) Mode 0: Real time tracking mode
Command: *SPJLX*P:123456*RM:1,0#
0: means working mode 0.
B.) Mode 1 (default) : Power saving mode
Command: *SPJLX*P:123456*RM:1,1,3,3,120,30,3,30#
1: means working mode 1.---- User can modify yellow value as per actual needs.

5
When device moving, it will update new location at every 1 minute;
If not moving, device will sleep to save power & wake up for 3 minutes(above yellow 3) at every 120
minutes(above yellow120). Device will show disconnect from server when in this case.
C.) Mode 2: Set clock mode
Command:*SPJLX*P:123456*RM:1,2, 3,1:00,2:00...#
2: means working mode 2. ----User can modify yellow value as per actual needs.
Device will wake up for 3 minutes (above yellow 3) at fixed time clock 1:00,2:00 etc…
In Mode 2, Device will disconnect from server when sleep.
Tips: In all working modes, device standby time is directly affected by “working time”, if works longer,
battery standby time will be shorter.