Canvas HIGHFIELD BALANCELLE 088-2299-0 User manual

HIGHFIELD BALANCELLE
PRODUCT NO. 088-2299-0
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #mycanvasstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!
INSPIRED BY CANADA

Parts List 4
Step-by-step Guide 6
Caring for Your Item 13
Warranty 13
TABLE OF CONTENTS
TOOLS REQUIRED
•
Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
•Any assembly or maintenance of the product must be carried out by adults only.
•Some parts may contain sharp edges. Wear protective gloves if necessary.
•To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
•Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
3people
12
Allen Wrench
Not shown at actual size
HIGHFIELD BALANCELLE 3
Hex Wrench
•
Do not exceed the maximum load capacity 275 kg.

PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1
2
Metal leg
Lower Connection Bar
4
2
4
32
4
Top Connection Bar
Top Support Bar 2
5
6
Top crossbar
Right Arm
1
1
7
8
Left Arm
Seat
1
1
9
10
Back
Hanging bar
1
4
11
12
Canopy
Canopy crossbar
1
2
13
Middle Canopy crossbar 1
Right
Left
14
15
1
Cushion
Back cushion 2
HIGHFIELD BALANCELLE

EXPLODED PARTS
5
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A
B
C
D
Bolt with washer M6X18 18 + 1 Spare
Bolt with washer M6X36 2
Bolt with washer M6X45
Bolt with washer M8X25
2
E
G
H
Bolt with washer M8X45 24 + 1 Spare
“S” hook 2
Allen wrench 1
8 + 1 Spare
11
13
12
2x
5
15
2x
G
2x
14
4
2x
6
7
9
8
3
2x
10
4x
1
4x
2
2x
F2
Bolt with washer M6X25
IHex wrench
1
HIGHFIELD BALANCELLE

6
STEP-BY-STEP GUIDE
2X2
IX1
1X4
EX8
STEP 1
Attach the lower connection bar 2 to the metal leg 1using the bolt Ewith washer, and
aligning the holes. Do not tighten completely. Repeat procedure for the other connection
bar and metal legs. Note: The side with “inside” label should be facing the inside of the
metal leg 1.
STEP 2
Attach the top connection bar 3to the metal leg 1using the bolt Ewith washer,
and aligning the holes. Do not tighten completely. Repeat procedure for the other
connection bar. Note: The side with “inside” label should be facing the inside of the
top connection bar 3.
1
1
2
E
1
2
Inside
1
1
3
E
1
3
Inside
HIGHFIELD BALANCELLE
3X2
IX1
1X4
EX8

7
STEP-BY-STEP GUIDE
STEP 3
Attach the top support bar 4 to the metal leg 1using the bolt Ewith washer, and aligning
the holes. Do not tighten completely. Repeat procedure for the other top support bar.
Note: The side with “inside” label should be facing the inside of the top support bar 4.
Make sure the arrow “↑” is pointing up.
STEP 4
Attach the top crossbar 5 to the top support bar 4using the bolt Dwith washer,
and aligning the holes. Repeat procedure for the other side.
When assembled, securely tighten all bolts with the hex wrench Ifor steps 1-4.
4
11
E
4
Inside
5
D
4
5
HIGHFIELD BALANCELLE
4X2
IX1
1X4
EX8
5X1
IX1
4X2
DX8

8
STEP-BY-STEP GUIDE
8X1
CX1
6X1
FX1
STEP 5
Attach the right arm 6 to the seat 8using the bolt Fwith washer, bolt Cwith
washer and aligning the holes. Do not tighten completely.
H
Right
X1
STEP 6
Attach the left arm 7to the seat 8using the bolt Fwith washer, bolt Cwith washer
and aligning the holes. Do not tighten completely.
8
6
F
6
6
8
8
C
F
8
7
7
7
8
8
C
HIGHFIELD BALANCELLE
8X1
CX1
7X1
FX1
H
Left
X1

9
STEP-BY-STEP GUIDE
9X1
8X1
STEP 7
First attach the back 9 to the assembled frame 6 & 7 & 8, using the bolt Bwith
washer and
secure it into the right arm 6. Second, using the bolt Awith washer
secure it into the seat 8. Repeat procedure for the other side. Do not tighten
completely.
AX2
STEP 8
Using the bolt Awith washer
secure it into the back 9. Do not tighten completely.
Repeat procedure for the other side.
When assembled, securely tighten all bolts with the allen wrench H for steps 5 - 8.
HX1
BX2
7
6
8
9
B
9
6
9
8A
HIGHFIELD BALANCELLE
7X1 6X1
Right
HX1
Left
7
6
9
A
9
7
AX2
9X1
7X1 6X1
Right Left

STEP-BY-STEP GUIDE
GX2
10 X4
STEP 9
Hook the hanging bars 10 into “S” hook. Note: the side with “TOP” label should be
facing the “S” hook. The other end of hanging bars should fit into the pins at the ends
of each arm. Repeat procedure for the other remaining two hanging bars.
STEP 10
Hang the assembled body on the top crossbars 5.
10
5
G
5
TOP
TOP
10
10
10
10
G
7
6
HIGHFIELD BALANCELLE
7X1
6X1
Right Left
GX2 5X1

11
STEP-BY-STEP GUIDE
STEP 11
Attach the canopy 11 using the bolt Awith washer secure it into the top support
bar
4. Note: The side with “inside” label should be facing the inside inside for canopy 11 .
Repeat procedure for the other side. Do not tighten completely.
STEP 12
First attach the canopy crossbar bar 12 by inserting into the canopy 11. See Fig.1. Second
using the bolt Awith washer
secure it into the canopy 12. Do not tighten completely.
Repeat procedure for the other side and other canopy crossbar
12 . See Fig.2.
11 X1
A
4
11
Inside
11
12
12
A
12
11
Fig.1
Fig.2
12 X2
AX4
HIGHFIELD BALANCELLE
HX1
4X2 11 X1
AX4 HX1

12
STEP-BY-STEP GUIDE
STEP 13
11
First, using the bolt Awith washer secure it into the canopy 11. Do not tighten
completely. Repeat procedure for the other side. Second,
attach canopy support
bar 13 to the assembled canopy by insert a bolt Awith metal washer and secure it into
the top crossbar 5. Do not tighten completely. Repeat procedure for the other side.
When assembled, securely tighten all bolts with the allen wrench H
for steps 11 - 13.
STEP 14
Put the seat cushion 14 and back cushion
15 on the seat and back.
Y
our swing is now ready for use. Enjoy!
11
A
A
13
5
13
A
14
15 15
HIGHFIELD BALANCELLE
15 X2 14 X1
HX1
AX6
5X1
13 X1 11 X1

13
WARRANTY INFORMATION
CARING FOR YOUR ITEM
1 2 3
4 5
Always keep children under
close supervision while they
are using or around this
product. Never leave
children unattended.
We recommend the use
of furniture covers when
not in use.
Do not light any fires
below or near the
product.
This product is intended
for outdoor use only.
Check all nuts and bolts
periodically for tightness.
When required, tighten
them again.
FURNITURE CLEANING:
Wash frame with mild soap and water, rinse thoroughly,
and dry completely. Do not use bleach, acid, or other solvents on the frame.
•The cushion may be washed on the surface only by using mild soap and water or
commercial foaming upholstery cleaner if necessary. If washed, rinse well and hang
to dry. Do not machine wash or dry.
OFF SEASON: Clean and dry before storing in a dry, sheltered area.
This CANVAS™ product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within the
stated warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
PRODUCT NO. 088-2299-0
HIGHFIELD BALANCELLE
1-YEAR LIMITED WARRANTY*

INSPIRED BY CANADA