Carrera 657 User manual

DESIGNED IN GERMANY
EN
FULLY AUTOMATIC COFFEE MACHINE
Instruction manual
RUS
АВТОМАТИЧЕСКАЯ КОФЕМАШИНА
Инструкция по эксплуатации
№657

2 EN
Thank you.
For having placed your trust in CARRERA and for giving us the
opportunity to prove you right with our fully automatic coffee
machine.
We create technology maximizing user friendliness, handling and
aesthetics and bringing performance to life.
Not only do we use an innovative coffee brewing system but also
made sure that each individual component interplays perfectly
for top performance. You will love our coffee machine from the
moment you switch it on.
We call it the CARRERA boost.
We have not reinvented the wheel, but we had the courage to
do right what is crucial and to dispense with everything that is
unimportant.
That is our style. And you will rediscover it in every CARRERA
appliance.

EN 3
CONTENTS
01. SAFETY PRECAUTIONS 5
02. INTENDED USE 8
03. APPLIANCE OVERVIEW 9
General description 9
Control panel 10
04. TECHNICAL SPECIFICATIONS 11
05. PARTS LIST 11
06. FIRST START 12
Filling the water tank 13
Filling the coffee bean container 13
Auto-rinsing function 14
Turning the appliance off 14
Auto shut-off 14
07. PREPARING DRINKS 14
Preparing Espresso 14
Preparing Americano 15
Preparing Latte Macchiato 15
Preparing Cappuccino 17
Tips for hotter coffee 17

4 EN
Preparing milk foam 17
Preparing hot water 18
08. ADDITIONAL SETTINGS 18
Adjusting coffee/hot water quantity 18
Adjusting the grind 19
Selecting modes 19
Descaling 20
Empty system function 21
Manual rinsing 22
09. CLEANING & MAINTENANCE 22
Cleaning the body and control panel 23
Cleaning the brewer 23
Cleaning the drip trays and coffee grounds container 24
Cleaning the water tank 24
Cleaning the automatic milk froth system 24
Cleaning the milk container and connection milk tube 25
10. TROUBLESHOOTING 26
11. DISPOSAL 29
12. TRANSPORT AND STORAGE 29
13. WARRANTY 30
14. ADDITIONAL INFORMATION 30

EN 5
01. SAFETY PRECAUTIONS
These important safety precautions are critical part of the
appliance. Please read them all carefully before using the
appliance for the first time. You may keep the instructions for
future reference or pass it to other users. Always handle with care
and warn other users of the potential danger.
CAUTION!
Misuse of the appliance can cause injury!
yMake sure that the mains voltage stated on the rating plate
corresponds to the local electricity supply.
yTo avoid a hazard due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
yThe appliance is not recommended to be connected to the
mains using extension cords, splitters and adapters.
yIn order to avoid overloading the electrical network, it is not
recommended to turn on several appliances with high power
consumption at the same time.
yThe appliance is recommended to be connected to a
grounded outlet.
yConnect the appliance to AC power source only. For additional
protection please install a residual current device (RCD). For
installation, contact a specialist.
yDo not connect the appliance to the power source before
finishing assembly and adjustment.
yPlace the appliance on a firm and steady surface. Do not put
the appliance in a kitchen cabinet.
yDo not place the appliance on or near hot gas or electric
burner, or in a heated oven.
yDo not use the appliance in outdoor environment.
yDo not use the appliance in places where aerosols are sprayed
or flammable liquids are present.
yDo not use the appliance near curtains or other flammable
objects.

6 EN
yThis appliance is designed for household use only.
yDo not place the appliance near sources of water or other
liquids, or near heating appliances.
yDo not place the appliance in a room where air temperature
can drop below the freezing point of water (0 °C).
yDo not immerse the appliance in water or any liquids. Do not
touch it with wet hands.
yDo not use appliance for other than intended use.
yKeep the appliance and power cable away from high
temperatures, direct sunlight, moisture and other negative
influences.
yDo not turn the appliance on if it was dropped, even if there
is no external damage, until it is inspected by a qualified
specialist.
yDo not cover the plugged-in appliance with a towel or other
object. Do not place any foreign objects on the appliance.
yDo not leave the appliance unattended, when it is connected
to main supply.
yDo not use the appliance if the drip tray is not installed
properly.
yAlways use cold water to make coffee. Warm water or other
liquids could damage the appliance.
yUse the grinder for grinding coffee beans only.
yDo not operate the hot water function continuously for more
than one tank of water.
yDo not let cord hang over the edge of table or counter or
touch hot surface. Do not place the cord on a sharp edge of an
item.
yThe use of accessories not included in the box is not
recommended. It might be dangerous and should be avoided.
yEmpty the water tank if the appliance is not used for a long
period.
ySome parts of the appliance may get hot during operation. To
avoid burns, do not touch hot surfaces with your hands.

EN 7
yChildren shall not be playing with the appliance. This appliance
shall not be used by children. Keep the appliance and its cord
out of children’s reach.
yDo not allow children to play with the appliance, accessories,
box or other packaging to avoid injury or suffocation.
yDisconnect the appliance from mains supply outlet in the
following cases:
yBefore filling the water tank with water,
yBefore assembling or dissembling the appliance,
yBefore cleaning or maintenance of the appliance,
yIf the appliance is not working correctly,
yAfter using the appliance.
yThe appliance should be cleaned after each use.
yWait until the appliance cools down before assembling or
dissembling or cleaning the appliance.
yDo not pull the cable, when disconnecting the appliance from
the mains. Do not wind the cable around the appliance. Do not
try to carry the appliance by the cable.
yIf the power cord is damaged, it must be replaced by a
qualified specialist to avoid any hazard.
yAppliance can be used by persons (including children) with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they are under supervision or
have been given instruction concerning use of the appliance in
a safe way and understand the hazards involved.
yRegularly check the appliance and its cable for mechanical
damage and do not use the appliance if any is found. It is
forbidden to repair the appliance or make changes to its
design on your own. Do not attempt to open the main body or
dismantle any parts from the appliance. Repair of the appliance
or replacement of the power cord must be carried out in a
specialized service center only.

8 EN
02. INTENDED USE
The automatic coffee machine is designed to prepare coffee drinks
using natural coffee beans.
The appliance is intended for domestic and similar purposes, in
particular:
yin kitchen areas for staff in shops, offices and other production
environments;
yin farm houses;
yin hotels, motels and other residential type infrastructure by
clients;
yin «accommodation plus breakfast» boarding houses.

EN 9
03. APPLIANCE OVERVIEW
GENERAL DESCRIPTION
1. External drip tray 11. Brewer
2. Drip tray cover 12. Cleaning brush
3. Internal drip tray 13. Power cord
4. Coffee grounds container 14. Milk container
5. Adjustable coffee spout 15. Milk container lid
6. Control panel 16. Connection milk tube
7. Coffee bean container 17. Milk tube connector
8. Coffee beans container cover 18. Connection rubber
9. Water tank 19. Container milk tube
10. Service door 20. Needle

10 EN
CONTROL PANEL
“Drink preparation in process” indicator
Flashing: Low water level/Water tank missing
Lack of beans
Lights up stably: coffee grounds container is full
Flashing: internal drip tray/coffee grounds container is
missing
Lights up stably: brewer is missing/installed improperly
Flashing: service door is opened /installed improperly
Lights up stably: descaling is needed
Flashing: descaling is in process
Empty System Function is running
Power ON/OFF button
Espresso button
Cappuccino button
Latte Macchiato button
Cleaning/milk foam button
Hot water button

EN 11
04. TECHNICAL SPECIFICATIONS
yPower: 1235-1470 W
yVoltage: 220-240 V ~, 50-60 Hz
yPump pressure: 19 bar
yBean container: 150 g
yRemovable water tank: 1.2 L
yMilk container: 240 ml
yLED-panel with touch keys
yPatented brewing system
yPre-brewing System
yCoffees with milk
yHot water function
y5 grinding settings
yStainless steel grinder
yHeight-adjustable coffee dispenser
yRefill tank signal
yRefill bean signal
yDescaling indicator
yDescaling program
yRemovable coffee grounds container
yRemovable drip tray
yEmpty tank function
yAuto shut-off
yRemovable power cord
yNet/gross weight: 8.39/9.43 kg
yProduct dimensions (L x W x H): 407 x 180 x 320 mm
yBox dimensions (L x W x H): 443 x 228 x 373 mm
05. PARTS LIST
yFully automatic coffee machine
yMilk frothing system (milk container with a lid, connection milk
tube, connection rubber, container milk tube)
yCleaning kit (cleaning cloth, cleaning brush, needle, citric acid
x 3 packs (15 g/pack))
yInstruction manual

12 EN
06. FIRST START
1. Remove any protective films, stickers and any
other packing material from the appliance. Make
sure that the accessories of the appliance fit the
parts list, and that the appliance is not damaged.
2. Choose a safe, firm and stable surface with
a power supply socket within easy reach and
make sure there is some free space around the
appliance: at least 150 mm on the sides and at
least 350 mm above the appliance.
3. Install the external drip tray (1). Make sure it is
installed properly.
4. Fill the water tank (9) with water (see “Filling
the water tank”).
5. Fill the coffee bean container (7) with coffee
beans (see “Filling the coffee bean container”).
6. Unwind and straighten the power cord (13)
and insert the plug into the socket located on
the back of the appliance. Insert the other end
of the power cord into a wall socket with suitable
power voltage. Clean the appliance by pressing
the hot water button . The appliance is ready
to use.

EN 13
NOTES:
After storage or transportation at low temperatures, keep the
appliance in a warm room for two hours before turning it on.
When using the appliance for the first time you need to make
4-5 coffees to get satisfactory results.
FILLING THE WATER TANK
Before the first use or if the indicator is flashing you need to fill
the water tank. Lift the water tank by using the lid as the handle.
Fill the water tank with water to the MAX level and place it back
into the machine.
CAUTION!
To prevent overflow of water from the water tank, do
not add water into the appliance directly.
Never fill the water tank with warm, hot, sparkling
water or any other liquid as it might damage the water
tank and the appliance.
FILLING THE COFFEE BEAN CONTAINER
Before the first use or if the indicator is flashing, fill the
appliance with coffee beans. Remove the bean container lid (8).
Slowly add the coffee beans to the container. Install the lid back.

14 EN
CAUTION!
Fill the coffee bean container with coffee beans only.
Grounded coffee, instant coffee, caramelized coffee
and any other objects may damage the appliance.
AUTO-RINSING FUNCTION
After every switch-on (except if the appliance was switched off for
a short time), the appliance performs an automatic rinse heating
both the boiler and the internal channels with hot water. Some hot
water will come out of the spout, be careful not to get burnt!
You can stop rinsing by pressing the button or disable the
function at all. To achieve it remove the lid of the brewer (11), then
press and hold the on/off button until you hear a beep sounds.
To turn the rinse function on, take the brewer lid off again, then
press and hold the power button.
TURNING THE APPLIANCE OFF
Switch the appliance off by pressing the power on/off button .
Unplug the appliance from the mains if you do not plan to use it
for a long time.
AUTO SHUT-OFF
The appliance is equipped with auto shut-off function. Depending
on the mode selected the appliance will have different auto shut-
off timing (see “Selecting modes”).
07. PREPARING DRINKS
PREPARING ESPRESSO
1. Switch the appliance on by pressing the power on/off button
and make sure that the drip tray is under the coffee spout
(5) and that the water tank is not empty.
2. The appliance will perform auto-rinsing for a small cup of
water, you can stop it by pressing . The appliance will enter
the standby mode then.

EN 15
3. Place a cup under the coffee spout and
adjust the height of the spout. If the cup
is too wide, you can adjust the position
of the drip tray: thanks to the magnetic
holder, you just need to pull it towards you,
and then simply slide it back. The drip tray
remains stable and balanced.
4. Press the Espresso button , the indicator will be on while
the appliance is preparing coffee.
5. When the coffee is ready to serve, the appliance will be back
to the standby mode.
PREPARING AMERICANO
1. Make Espresso in a large cup (see “Preparing Espresso”).
2. Press Hot water button using the same cup. The appliance
will dispense the default quantity of water (150 ml). Your
Americano is ready to serve.
PREPARING LATTE MACCHIATO
1. Assemble the automatic milk froth system according to the
scheme below:
a) Place the connection rubber
(18) into the slot inside the lid
of the milk container (15).
b) Insert the container milk tube
(19) to the rubber inside the lid.
c) Insert the connection milk
tube to the rubber outside the
lid.
d) Insert the milk tube
connector to the dispensing
spout milk frother inlet (open
the inlet cover first).
CAUTION!
Fill the coffee bean container with coffee beans only.
Grounded coffee, instant coffee, caramelized coffee
and any other objects may damage the appliance.
AUTO-RINSING FUNCTION
After every switch-on (except if the appliance was switched off for
a short time), the appliance performs an automatic rinse heating
both the boiler and the internal channels with hot water. Some hot
water will come out of the spout, be careful not to get burnt!
You can stop rinsing by pressing the button or disable the
function at all. To achieve it remove the lid of the brewer (11), then
press and hold the on/off button until you hear a beep sounds.
To turn the rinse function on, take the brewer lid off again, then
press and hold the power button.
TURNING THE APPLIANCE OFF
Switch the appliance off by pressing the power on/off button .
Unplug the appliance from the mains if you do not plan to use it
for a long time.
AUTO SHUT-OFF
The appliance is equipped with auto shut-off function. Depending
on the mode selected the appliance will have different auto shut-
off timing (see “Selecting modes”).
07. PREPARING DRINKS
PREPARING ESPRESSO
1. Switch the appliance on by pressing the power on/off button
and make sure that the drip tray is under the coffee spout
(5) and that the water tank is not empty.
2. The appliance will perform auto-rinsing for a small cup of
water, you can stop it by pressing . The appliance will enter
the standby mode then.

16 EN
2. Clean the automatic milk froth system (see “Cleaning and
Maintenance”).
3. Fill the milk container with milk and close the lid. Use cold
semi-skimmed or full-fat 3.2-4 % milk (at a temperature of
approximately 5 °C) with a protein content of at least 3-3.5 %
to ensure an optimal frothing result.
4. Switch the appliance on by pressing the power on/off button
. Make sure that the drip tray is under the coffee spout and
that the water tank is not empty. The appliance will perform
auto-rinsing, you can stop it by pressing . The appliance will
enter the standby mode.
5. Place a cup under the spout. Press Latte Macchiato button
, the indicator light will be on while the appliance is
preparing coffee. The machine will dispense milk first and then
coffee. To stop preparation, press again.
6. When the coffee is ready to serve, the appliance will be back
to the standby mode.
7. Remove the milk container from the appliance and put it in the
fridge.
8. After use see “Cleaning the automatic milk froth system”.
CAUTION!
Steam and hot milk may spray out of the spout at the
beginning of the brewing.
Place the connection milk tube around the milk
container lid after use. Do not let it fall freely to
prevent milk spray out because of the pressure drop.

EN 17
PREPARING CAPPUCCINO
1. Assemble the automatic milk froth system (see “Preparing latte
macchiato”).
2. Fill the milk container with milk and close the lid. Use cold
semi-skimmed or full-fat 3.2-4 % milk (at a temperature of
approximately 5 °C) with a protein content of at least 3-3.5 %
to ensure an optimal frothing result.
3. Switch the appliance on by pressing the power on/off button
. Make sure that the drip tray is under the coffee spout and
that the water tank is not empty. The appliance will perform
auto-rinsing, you can stop it by pressing . The appliance will
go into the standby mode.
4. Place a cup under the spout. Press
Cappuccino button , the indicator
light will be on while the appliance
is preparing coffee. The machine will
dispense milk first and then coffee. To
stop preparation, press again.
5. When the coffee is ready to serve, the
appliance will be back to the standby mode.
6. Remove the milk container from the appliance and put it in the
fridge.
7. After use see “Cleaning the automatic milk froth system”.
TIPS FOR HOTTER COFFEE
For hotter coffee, take the steps as follows:
1. Make sure that rinsing is done before drink preparing.
2. Preheat the cups with hot water using the hot water button
(see “Preparing hot water”).
PREPARING MILK FOAM
1. Assemble the automatic milk froth system (see “Preparing latte
macchiato”).
2. Fill the milk container with milk and close the lid. Use cold
semi-skimmed or full-fat 3.2-4 % milk (at a temperature of

18 EN
approximately 5 °C) with a protein content of at least 3-3.5 %
to ensure an optimal frothing result.
3. Switch the appliance on by pressing the power on/off button
. The appliance will perform auto-rinsing, you can stop it by
pressing . The appliance will go into the standby mode.
4. Place a cup under the spout and press the button twice; the
indicator light will be on. To stop preparation, press again.
5. When the milk foam is ready to serve, the appliance will be
back to the standby mode.
6. Remove the milk container from the appliance and put it in the
fridge.
7. After use see “Cleaning the automatic milk froth system”.
PREPARING HOT WATER
1. Put a cup under the spout.
2. Press Hot water button ; the indicator light will be on. The
appliance will start dispensing hot water. To stop the water
flow, press again.
08. ADDITIONAL SETTINGS
ADJUSTING COFFEE/HOT WATER QUANTITY
The appliance can memorize your desired volume of coffee and
hot water.
1. Place a cup under the spout.
2. Switch on the appliance, all button lights will be on. Press
Espresso/Cappuccino/Latte Macchiato/Hot Water button. The
indicator light will be on.
3. When the appliance starts dispensing coffee/water, touch and
hold the button until you get the quantity needed. The MAX
quantity is 250 ml. You will hear two beep sounds meaning
that the new quantity is memorized by the appliance.

EN 19
NOTE:
After changing the quantity you will not be able to restore the
default settings. You will have to adjust the quantity manually.
ADJUSTING THE GRIND
You can adjust the grinder to suit your taste
by turning adjuster knob in the coffee bean
container.
The dots on the adjuster knob correspond to the
fineness of the grind.
If the coffee comes out slowly or does not come out at all, turn the
knob to the left.
For richer coffee with better foam, turn the knob to the right.
CAUTION!
Never try adjusting the grind when the grinder is not
operating. It may damage the grinder.
SELECTING MODES
The appliance has three different settings: default setting, ECO
mode and speed mode. In ECO mode, the appliance helps to
save more energy.
In speed mode, you can make your coffee faster than in default
setting.
Speed
Mode
Default
Setting ECO Mode
Illumination yes yes no
Pre-brewing* no yes yes
Auto shut-off time 30 min. 20 min. 10 min.
Cup volume
memory yes yes yes

20 EN
*The pre-brewing moistens the grounded beans in the brewer with
a small amount of water. It expands the coffee grounds to build up
a greater pressure in the brewer helping to extract oils and flavors
from the grounded beans.
1. When the appliance is in the standby mode, press and holds
for 5 seconds.
2. The buttons will have the following indications in different
settings:
Latte
Macchiato
button
Espresso
button
Cappuccino
button
In ECO Mode Lights ON Flashing Flashing
In Speed Mode Flashing Lights ON Flashing
In Default Setting Flashing Flashing Lights ON
3. Press the Cappuccino button for default settings, Espresso
button for speed mode and Latte Macchiato button for
ECO mode. Two beeps will sound meaning that the new mode
is applied.
4. If you want to keep the settings unchanged, press again or
wait for 5 seconds for the appliance to return to the standby
mode.
DESCALING
If lights up stably, it means that the appliance requires
descaling. The appliance will remain in the best condition if
descaling is performed at least once a month or more often
depending on the hardness of the water used.
1. Fully fill the water tank.
2. Add one pack of cleaning agent included in the box to the
water tank.
3. Plug in the appliance. Place a large container under the coffee
spout. Remove the milk tube connector from the dispensing
spout milk frother inlet if necessary.