Castle Creations FIELD LINK PORTABLE PROGRAMMER FOR DRIVING User manual

Castle Creations, Inc. warrants this product to be free from manufacturing defects
for a period of one year from date of purchase.
Safety First!
Castle Creations, Inc., is not responsible for your use of this product, or for any
damages or injuries you may cause or sustain as a result or its usage. An electric
motor that is connected to a battery and speed control may start unexpectedly
and cause serious injuries. Keep the propeller away from your body and others at
all times. Always observe local laws regarding the operation of remote controlled
aircraft.
This product may contain chemicals known to the State of California to cause cancer
and or birth defects or other reproductive harm.
899598 00194 6
P/N: 010-0063-00
*Field Link oers access to the most commonly used settings without a computer.
DOES IT WORK WITHOUT A COMPUTER
OR NOT?
Yes, mostly. The card is programmed to work with the latest controllers and software
when it leaves the Castle workshop. It will work with all Castle Link compatible
controllers running software released since 2007. Go to www.castlecreations.com for
more details. There is always a chance that we will upgrade the controller firmware
down the road and that upgrade may require that the Field Link be upgraded too. That
is easily accomplished, but it will require a computer running the latest version of Castle
Link that is always available for free on the Castle website. We’ll also be happy to
upgrade it for you if you drop it in the mail to us.
PROGRAMS CASTLE CAR CONTROLLERS
WITHOUT A COMPUTER. (see back for details)
WORKS AS A COMPLETE USB CASTLE LINK
WITH YOUR COMPUTER.
1.Cuto Voltage
2.Auto LiPo cuto volts
per cell (3.0, 3.1, 3.2,
3.3, 3.4, 3.5)
3.Drag Brake
4.Brake Strength
CHANGE THE FOLLOWING SETTINGS
WITHOUT A COMPUTER*
Works with all Castle Link compatible car
products.
CONNECTS YOUR CONTROLLER TOYOUR
COMPUTER FOR COMPLETE CASTLE
LINK COMPATIBILITY.
5.Punch Control
6.Reverse Type
7. Motor Type
8.Motor timing and
CHEAT mode
(Castle High Energy
Advanced Timing)
ERROR CODES:
All LEDs flashing in alternating half on, half
o pattern.
An unrecognized controller is plugged into
the Field Link Card. Please ensure that you
are connecting a supported device, if the
controller is supported, you may need to
update the software on the Field Link Card
itself. Use your computer to download the
newest version of Castle Link and connect
the Field Link Card to your computer using
the USB port on the Field Link. Castle Link
will prompt you to automatically install any
updates to your Field Link Card.
All “Value” LEDs flash for a particular
setting.
The setting’s current value is not an option
on the Field Link device. For instance, you
could have programmed a custom value for
‘Cuto Voltage’ using Castle Link software
and your computer. You can simply press the
button and skip this setting, it will remain at
its current value. If you want to change it,
press and hold the button as detailed on the
interior of this card. Note that you will have
to use the Castle Link application to go back
to the custom setting.
© 2015 Castle Creations, Inc. 095-0081-02 Revision date - 04/2015
Field Link Car Header Card 095-0081-02.indd 1 4/16/15 4:49 PM

1. Connect the throttle lead from ESC to the 3
pin connector on the Field Link card. Apply
power to ESC and card as shown in the
diagram to the right. Field Link will flash
a green LED to signal that all connections
are properly completed.
2. The red SETTING LED column on the left
of the card indicates which setting row is
USE THE FIELD LINK TO MAKE CHANGES WITHOUT A COMPUTER
USE THE FIELD LINK CARD AS A CASTLE LINK USB ADAPTER WITH A WINDOWS PC
displayed and open to modification. The red
VALUE LEDs along the top of the card indicate
the value that is currently set in the ESC for
the particular setting. Read the setting in the
column and row with the active LEDs.
3. Use the button under the label on the bottom
right side of the card to change rows and
settings. Short clicks on the button change the
setting row open to display and modification.
1. Connect the Field Link to your Windows™
computer running Castle Link software
with a USB cable (not included). Power
controller as shown in the diagram to
right.
2. The green LED on the Field Link will start
flashing once a successful USB link is
established between the computer, the
Field Link Card and the Castle ESC. Use
Castle Link software screen to view and
modify settings in the controller.
Click button at bottom right corner of Field Link to read or change settings in your
controller. Short clicks scroll through settings, long clicks change values within the
settings. All changes made on the card are instantly written to the controller.
Field Link and ESC are both powered by the USB connection
Field Link and ESC are both powered by the motor pack
NOTE: Field Link card will only connect to the Mamba Max using the throttle cable. You must upgrade the Mamba Max to
software version 1.23 or higher with your Windows PC to enable throttle cable USB connectivity.
Long clicks (simply hold button) move the
value across the row from left to right.
4. Once you are satisfied with the value
you have for each setting, simply unplug
power and then the Field Link from the
ESC throttle lead. Re-connect the throttle
lead to the radio receiver and go for a
drive!
Field Link Car Header Card 095-0081-02.indd 2 4/16/15 4:49 PM