CBC LME17 User manual

1
1 Introduction and Package Contents
Introduction
Congratulations on your purchase. You can expect only the
sharpest and most brilliant color images from this monitor.
Featuring easy to use OSD controls and built in speakers, you will
find this monitor both easy to use and a pleasure to look at.
lease unpack the monitor with care, and verify that all the parts
listed below are included. If any parts are missing, please
contact with your local distributor.
lease save the packing box for possible future return for service.
Package Contents
•One LED Monitor
•12V DC Adapter/ ower cord
•D-Sub 15-pin VGA connector Cable
•User's Guide
Hardware Installation
The following sections in this guide give clear, step-by-step
descriptions of the installation process and explain how to use
the monitor for optimum results.
lease pay attention to the Regulations and Warnings Section of
this user’s manual before setting up the display monitor. Failure
to do so may inadvertently result in personal injuries or machine
damage.

2
Specifications
Size 17” 19”
Output Interface (BNC) x 2
Input Interface (BNC) x 2, (VGA) x 1, (RCA) x 2 ( C Audio) x 1 , (HDMI) x 1
Output video (BNC) x 2
Speaker 1.5W x 2
Display Mode Video 1/ Video 2/ VGA / HDMI
AC power AC 100~240V 50/60Hz
Input power 12VDC 3.33A, 40 Watt Max
Temperature Operation: 0°~40°C , Storage:-10°~60°C
ower
Consumption
20W max in on mode 25W max in on mode
Under 3W in ower Saving Mode (100 Vac)
Under 5W in ower Saving Mode (240 Vac)
OSD Control icture Mode, Contrast, Brightness, Color, Tint, Sharpness,
Color Temp, DNR
OSD Languages English, German, French, Italian, Spanish, Russian, Turkish,
Japanese, olish
Auto Adjustment Yes
De-interlace Yes
Wall mount Yes (Optional) 75mm VESA mount
Accessories Manual, ower Adaptor, VGA cable
Safety FCC, CE, ROHS
Tilt -5°~15°C
Humidity 10％~90％
Monitor scan Microprocessor controlled
Horizontal frequency 31kHz~65kHz
56Hz~75Hz
D MS,DDC1/2B
Vertical frequency
VESA specifications
ixel pitch 0.264x0.264mm 0.294x0.294mm
ixel format 1280x1024 1280x1024
Response time 5ms 5ms
Color depth 8-bit;16,77,216 colors
Contrast ratio 10,000:1 10,000:1
Luminance of white 300cd/m2 300cd/m2
Viewing angle (H/V) Horizontal : 170° / 160° , Vertical -170° / 160°
Display area 337.9 x 270.3
(H x V)mm
376.3 x 301.06
(H x V)mm
Weight
(monitor only) 3.2 KGS 3.3 Kg

3
Timing
Item Resolution H req.(kHz) V req.(Hz)
1 640x400@70 31.460 70.080
2 640x480@60 31.469 59.940
3 640x480@72 37.861 72.809
4 640x480@75 37.500 75.000
5 720x400@70 31.460 70.080
6 800x600@56 35.156 56.250
7 800x600@60 37.879 60.317
8 800x600@72 48.077 72.188
9 800x600@75 46.875 75.000
10 1024x768@60 48.363 60.004
11 1024x768@70 56.476 70.069
12 1024x768@75 60.023 75.029
13 1280x1024@60 63.981 60.020
14 1280x1024@75 79.976 75.025
Note:
1. lease note, selecting frequencies outside these ranges may result in an abnormal images or
damage to the monitor.
2. The resolution will be showed on the screen while VGA mode be selected.
For example:

4
Descriptions
The monitor displays AL or NTSC standard color images in CCTV
systems. 2 looping composite video BNC inputs, Audio input RCA,
an analog VGA input using 15-pin D-sub, and an HDMI (High
Definition Multimedia Input) connector.
eatures
– 17 inch plastic cased / metal cased models
– AC 100-240V ower Supply
– NTSC/ AL Auto Detect
– High Resolution Display 1280 x 1024
– VGA Input
– Composite Video Input
– HDMI Input
–On-screen Display (OSD) with Multiple Languages
–I / O Function
Quick Installation
1. Connect power cord and power adaptor.
2. Connect video cable
• Make sure both the LED display and computer are turned off.
• Connect the video cable from the LED display to the computer.
3. Turn ON LED display and computer
4. Select input source
• Select the proper input source corresponding to the video
Signal, AV1/ AV2 / VGA / HDMI.
5. VGA mode only
• ress button Auto on front panel to automatically adjusts
H- osition, V- osition, ixel Clock and hase for an optimal
image.

5
2 Monitor and OSD Control
Monitor and OSD Control
The LED color monitor has a simple control layout for controlling
the monitor and OSD (On Screen Display) functions. The table
below summarizes the control keys and their related functions.
Keys unction Description
Toggle the display between standby mode and on.
( ress “ ower” and waiting 6 sec., monitor will be display )
Automatically adjusts H- osition, V- osition, ixel Clock
and hase for an optimal image in C mode only.
Switch setting item.
Increase the value of the choose item.
Switch setting item.
Decrease the value of the choose item.
Select Source “ C”, ”AV1”, ”AV2”. (while in the OSD
menu this button is used as select, advance and
confirm)
Enter the main menu of the on-screen display (OSD).
Source Select
ress the select button to bring up source selection
Use the “”, “ ” keys to advance to the proper selection and
press select button to confirm the setting.

6
Note:
The message will be displayed on the
screen if there’s no VGA signal detected in VGA mode, and the
power will be off automatically after 10 seconds. lease press the
power button again to restart the monitor.
LED Status Display
The following table describes the various power states of the LED
monitor as represented by different LED colors.
Note: The LED will also be red if AV1 or AV2 is selected and there is no video
signal detected.
Power State LED Color
On Green
Standby Red
No power Blank

7
OSD Menu
Main OSD function menu
ress on front panel to access OSD
Main menu functions as following:
icture setup: Setup for overall image quality
Audio Setup: Setup of audio inputs
General Setup: Setup of basic sittings
I Setup: Setup for multiple signal display
ress the “ ”, “ ” keys to select the appropriate function
then press the select button to access and to advance within
that menu.
Use the “ ”, “ ” keys to change the parameter then press
select button to confirm and advance to the next selection.
When the setting completed, press the menu button to
return to the main menu. ress the menu button again to
exit OSD programming.
3 OSD Control unction List

8
AV1/AV2 Mode –
Picture Mode
1. icture Mode ress “ ” OR “ ” to select the picture mode
“Movie, Vivid, User, Standard”
2. Contrast This is used to set the brightness of the screen.
ress “ ” OR “ ” to adjust the parameter.
3. Brightness This is used to adjust the image contrast.
ress “ ” OR “ ” to adjust the parameter.
4. Tint This is used to adjust the image Tint.
ress “ ” OR “ ” to adjust the parameter.
5. Saturation This is used to adjust the image saturation.
ress “ ” OR “ ” to adjust the parameter.
6. Sharpness Adjust the sharpness. It makes the image become soft.
ress “ ” OR “ ”” to adjust the parameter.
7. Color Temp. ress “ ” OR “ ” to adjust the color tones.
“ Cool , Warm , Normal “
8. DNR ress “ ” OR “ ” to adjust the noise reduction.
“High , Low, Off, Mid “

9
Sound Mode
1. Volume ress “ ” OR “ ” to adjust volume level.
2. Mute ress “ ” OR “ ” to select sound “ Off, On ”.

10
Setting Mode
1. Language ress “ ” OR “ ” to select language.
2. H. osition Move the display picture left or right.
ress “ ” OR “ ” to adjust the parameter.
3. H Zoom Adjust the H-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
4. V osition Move the display picture up or down.
ress “ ” OR “ ” to adjust the parameter.
5. V Zoom Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
6. Scale Mode Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust “ Full, 16:9 ”.
7. Reset Recall Default value.
PIP/POP Setup Mode
1. Multi Window ress “ ” OR “ ” to select “ I , O ,Off ” mode.

11
2. SubSource ress “ ” OR “ ” to select “AV, VGA” mode.
3. Size Adjust the size of Sub Source window.
ress “ ” OR “ ” to select “Large, Small ”
4. osition Move the position of Sub Source window.
ress “ ” OR “ ” to select “U L, B L, B R, U R ” position.
5. Border Color Choose the border color of Sub Source window.
ress “ ” OR “ ” to select “Black, Blue” color.
6. Sound Source ress “ ” OR “ ” to select “Main, Sub” mode.
7. Swap ress “Select” to Swap the Source of Main and Sub.
Note:
AV1 and AV2 can not be displayed at the same time on the
monitor in I / O mode.
If O mode is selected both images are scaled to fit the screen.

12
VGA Mode –
Picture Mode
1. Contrast This is used to set the brightness of the screen.
ress “ ” OR “ ” to adjust the parameter.
2. Brightness This is used to adjust the image contrast.
ress “ ” OR “ ” to adjust the parameter.
3. Color Temp. ress “ ” OR “ ” to adjust the color tones.
“ Cool , Warm , Normal “
4. Auto Adjust Select Auto Adjust to Auto synchronizes screen to
graphics adaptor

13
Sound Mode
1. Volume ress “ ” OR “ ” to adjust volume level.
2. Mute ress “ ” OR “ ” to select sound “ Off, On ”.

14
Setting Mode
1. Language ress “ ” OR “ ” to select language.
2. H. osition Move the display picture left or right.
ress “ ” OR “ ” to adjust the parameter.
3. H Zoom Adjust the H-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
4. V osition Move the display picture up or down.
ress “ ” OR “ ” to adjust the parameter.
5. V Zoom Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
6. Clock ress “ ” OR “ ” to adjust the parameter.
7. hase ress “ ” OR “ ” to adjust the parameter.
8. Scale Mode Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust “ Full, 16:9 ”.
9. Reset Recall Default value.

15
PIP/POP Setup Mode
1. Multi Window ress “ ” OR “ ” to select “ I , O , Off ” mode.
2. SubSource ress “ ” OR “ ” to select “AV, VGA, HDMI” mode.
3. Size Adjust the size of Sub Source window.
ress “ ” OR “ ” to select “Large, Small ”
4. osition Move the position of Sub Source window.
ress “ ” OR “ ” to select “U L, B L, B R, U R ” position.
5. Border Color Choose the border color of Sub Source window.
ress “ ” OR “ ” to select “Black, Blue” color.
6. Sound Source ress “ ” OR “ ” to select “Main, Sub” mode.
7. Swap ress “Select” to Swap the Source of Main and Sub.
Note:
AV1 and AV2 can not be displayed at the same time on the
monitor in I / O mode.
If O mode is selected both images are scaled to fit the screen.

16
HDMI Mode –
Picture Mode
1. Contrast This is used to set the brightness of the screen.
ress “ ” OR “ ” to adjust the parameter.
2. Brightness This is used to adjust the image contrast.
ress “ ” OR “ ” to adjust the parameter.
3. Color Temp. ress “ ” OR “ ” to adjust the color tones.
“ Cool , Warm , Normal “
4. Auto Adjust Select Auto Adjust to Auto synchronizes screen to
graphics adaptor

17
Sound Mode
1. Volume ress “ ” OR “ ” to adjust volume level.
2. Mute ress “ ” OR “ ” to select sound “ Off, On ”.

18
Setting Mode
1. Language ress “ ” OR “ ” to select language.
2. H. osition Move the display picture left or right.
ress “ ” OR “ ” to adjust the parameter.
3. H Zoom Adjust the H-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
4. V osition Move the display picture up or down.
ress “ ” OR “ ” to adjust the parameter.
5. V Zoom Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust the parameter.
6. Scale Mode Adjust the V-size of the display picture
ress “ ” OR “ ” to adjust “ Full, 16:9 ”.
7. Reset Recall Default value.
PIP/POP Setup Mode
1. Multi Window ress “ ” OR “ ” to select “ I , O , Off ” mode.

19
2. SubSource ress “ ” OR “ ” to select “AV, VGA, HDMI” mode.
3. Size Adjust the size of Sub Source window.
ress “ ” OR “ ” to select “Large, Small ”
4. osition Move the position of Sub Source window.
ress “ ” OR “ ” to select “U L, B L, B R, U R ” position.
5. Border Color Choose the border color of Sub Source window.
ress “ ” OR “ ” to select “Black, Blue” color.
6. Sound Source ress “ ” OR “ ” to select “Main, Sub” mode.
7. Swap ress “Select” to Swap the Source of Main and Sub.
Note:
AV1 and AV2 can not be displayed at the same time on the
monitor in I / O mode.
If O mode is selected both images are scaled to fit the screen.

20
5 Mounting
VESA Bracket
Lay the LED display face down on a towel or blanket. Note the
4 screws that secure the hinge on the lower part of the back
casing. These may be removed to release the desk mount
bracket if required.
Attach a VESA compatible mounting bracket
(VESA 75mm x 75mm is supported)
4 screw for VESA 75mm