cCheck ScanAvenger User manual
TEAMWORK DEFINED BY QUALITY
BUILDING LONG LASTING RELATIONSHIPS
TECHNOLOGY DESIGNED BY REAL EXPERTS
ScanAvenger
Wireless / Bluetooth / USB
1D Barcode Scanner
Disclaimer
Please read through the manual carefully before using the product and operate it
according to the manual. It is advised to keep this manual for future reference.
Do not disassemble the device or remove the seal label from the device as this will void
the warranty.
Regarding to the product modification and update, cCheck Pty. Ltd reserves the right to
make changes to software or product to improve reliability, function, or design at any time
without notice. The information contained in this manual is subject to change without prior
notice.
The products depicted in this manual may include software copyrighted by cCheck Pty.
Ltd. or a third party. The user, corporation or individual, shall not duplicate, in whole or in
part, distribute, modify, compile, disassemble, decode, reverse engineer, rent, transfer or
sublicense such software without prior written consent from the copyright holders.
This manual is copyrighted. No part of this publication may be reproduced or distributed
in any form without written permission from cCheck Pty. Ltd.
cCheck Pty. Ltd. reserves the right to make final interpretation of the statement above.
Table of Contents
Disclaimer..............................................................................................................................................................2
Chapter1 System Settings...............................................................................................................................8
Introduction .....................................................................................................................................................8
Restore Defaults.............................................................................................................................................9
version................................................................................................................................................................9
User default settings.....................................................................................................................................9
Use Settings Code........................................................................................................................................11
Start off setting code..................................................................................................................................11
Programming Barcode Data ....................................................................................................................12
Sound settings ..............................................................................................................................................13
Increased/decreased sound .....................................................................................................................13
Sound frequency..........................................................................................................................................14
USB transmission speed ............................................................................................................................15
Image recognition method ......................................................................................................................17
Chapter2 Communication setting..............................................................................................................18
Introduction ...................................................................................................................................................18
USB interface .................................................................................................................................................18
TTL/RS232 mode..........................................................................................................................................22
PS2 Keyboard Mode ...................................................................................................................................25
Chapter3 Reading mode ...............................................................................................................................26
Trigger Mode.................................................................................................................................................26
Continuous scanning mode .....................................................................................................................26
Sense Mode ...................................................................................................................................................27
Flashing mode...............................................................................................................................................29
Press Key to delay single read mode....................................................................................................30
Test mode.......................................................................................................................................................30
Chapter4 Data Editing ....................................................................................................................................33
Introduction ...................................................................................................................................................33
Code ID Setting ............................................................................................................................................34
Custom Prefix ................................................................................................................................................35
Clear all the prefix........................................................................................................................................36
Custom suffix.................................................................................................................................................37
Clear all suffixes............................................................................................................................................38
Exit to set prefix and suffix .......................................................................................................................39
Hidden characters........................................................................................................................................40
Suffix setting..................................................................................................................................................44
Character conversion..................................................................................................................................45
Chapter5. Bar Code Parameter Settings ..................................................................................................46
Introduction ...................................................................................................................................................46
UPC-A...............................................................................................................................................................46
UPC-E ...............................................................................................................................................................49
EAN-8 ...............................................................................................................................................................52
EAN-13.............................................................................................................................................................54
Code 128.........................................................................................................................................................56
Code 39 ...........................................................................................................................................................56
Code 32 ...........................................................................................................................................................60
Code 93 ...........................................................................................................................................................61
Code 11 ...........................................................................................................................................................62
Interleaved 2 of 5.........................................................................................................................................63
Matrix 2 of 5...................................................................................................................................................66
Industrial 2 of 5.............................................................................................................................................67
Standard 2 of 5(IATA).................................................................................................................................68
Codabar（NW-7）.......................................................................................................................................69
Plessey..............................................................................................................................................................71
MSI Plessey.....................................................................................................................................................72
GS1 DataBar Limited（RSS Limited）...................................................................................................73
GS1 DataBar Omnidirectional（RSS Omnidirectional）................................................................73
China Post（Datalogic 2 of 5）...............................................................................................................74
Add-on Code.................................................................................................................................................75
Chapter6 Serial Communication Instruction ..........................................................................................76
Instruction.......................................................................................................................................................76
Frame format structure..............................................................................................................................76
Instruction Parsing.......................................................................................................................................77
Instruction save.............................................................................................................................................78
Instruction Feedback Setting...................................................................................................................79
Sound Feedback Settings..........................................................................................................................79
Trigger instruction.......................................................................................................................................80
Case Analysis .................................................................................................................................................80
Instruction sending example ...................................................................................................................82
Chapter7 Appendix..........................................................................................................................................83
Appendix -Code ID......................................................................................................................................88
Appendix - Instruction Set........................................................................................................................89
Appendix - Character Table (for adding suffixes) ......................................................................... 106
Appendix - ASCII code table................................................................................................................. 114
Introduction to part 2 –Wireless Functions........................................................................................ 119
Setup code....................................................................................................................................................... 119
Use instructions ............................................................................................................................................. 120
Restore Wireless Parameters .................................................................................................................... 121
Setting Custom Default Settings ............................................................................................................. 122
Version.............................................................................................................................................................. 122
Wireless Matching Function Settings .................................................................................................... 123
Communication mode switching............................................................................................................. 124
Shutdown......................................................................................................................................................... 125
Electric quantity display.............................................................................................................................. 126
Wireless transmission mode ..................................................................................................................... 127
Data Control (Data Processing for Storage Mode)........................................................................... 129
Data upload ................................................................................................................................................ 129
Total data..................................................................................................................................................... 129
Data clear..................................................................................................................................................... 129
Long press 8 seconds into Bluetooth HID search ............................................................................. 131
Scanner Matching Steps............................................................................................................................. 132
Computer Matching (2.4 G)................................................................................................................... 132
Bluetooth terminal matching................................................................................................................ 133
Android, IOS system keyboard settings (Bluetooth function) ...................................................... 135
Transission Speed Setting.......................................................................................................................... 136
Set Bluetooth Name..................................................................................................................................... 138
Sound setting ................................................................................................................................................. 140
Vibration setting............................................................................................................................................ 142
Sleep time setting......................................................................................................................................... 143
Language Settings ........................................................................................................................................ 145
Suffix setting................................................................................................................................................... 147
Case conversion settings............................................................................................................................ 149
Hidden Character GS Replacement Function...................................................................................... 151
Add prefix and suffix settings................................................................................................................... 152
Setting the prefix and suffix steps ...................................................................................................... 153
Cancel the prefix and suffix steps ....................................................................................................... 153
Hidden Character Settings......................................................................................................................... 154
Appendix -Led&Buzzer state description............................................................................................. 156
Appendix - buzzer prompt sound........................................................................................................... 157
Appendix - Character List........................................................................................................................... 158
Chapter1 System Settings
Introduction
The user manual has 2 parts. This first part focuses on configuration codes for the system
of the scanner and the second party on the wireless engine. The user can set the function
of the barcode reader by scanning one or more setting barcodes。
Scanning Instructions
In the Trigger Mode, the scanning barcode operation steps are as follows
1. Hold down the trigger key of the barcode reader, the line of sight is activated, red line
of sight appears。
2. Align the red line of sight with the bar code center, move the bar code reader and
adjust the distance between it and the bar code to find the best reading distance。
3. After hearing the successful prompt sound, and the red lighting line is extinguished,
the reading is successful, and the barcode reader transmits the decoded data to the host.
Note: During the reading process, you will find the distance between the barcode
reader and the barcode within a certain range for the barcode of the same batch, and
the reading success rate will be very high. This distance is the best reading distance.
Restore Defaults
All barcode readers have a factory default setting. Reading the "Restore default
settings" barcode will restore all barcode reader property settings to the factory state.
You are most likely to use this bar code in the following situations：
1、Error in barcode reader settings, such as barcode not recognized.
2、You have forgotten what settings were made for the barcode reader before, and you
do not want to use the previous settings。
3、The bar code reader is set to use some infrequently used features and is used after
completion。
000B0
Restore default settings
version
Use the scanner to scan the version number bar code, you can view the current bar
scanner version number information
User default settings
You can customize "user default settings" according to your needs. When the user sets
the corresponding settings code, it will replace the original default factory settings. Even
the user configuration set before power failure will not be lost.
000A0
version
00000
User default settings
00001
Replace with factory default settings
Instructions:
1. Read "Open Settings Code" bar code 09990 (default is open, no scanning is required);
2. Read the bar code of the corresponding function.
3. Read the "User Default Settings" bar code 00000;
4. Read the "Replace and Restore Default Settings" bar code 00001;
5. Read the "Close Settings Code" bar code 09991.
Note: When the above two barcodes are used together, you can save the current set function as
the factory default value after following the above steps. Even after scanning the "Restore factory
default" barcode 000B0, it will still be the current set function.
Use Settings Code
Setting codes are used as a special bar code. We can scan different settings codes to
achieve different functions for scanners. CODE 128 barcode type is selected when making
setting code, and the format of ^ 3 + barcode coding is used to make setting code.
Start off setting code
The setting code can be turned off. When the barcode reader is set to “Enter Setup”,
the setup function will work when the setup code is scanned. When the barcode reader is
set to “Exit Setup”, the scanner engine will scan the setup code. There will be an error
tone, the setting function will not work, the default is "Enter Setup".
09990
Enter Setup*
09991
Exit Setup
Programming Barcode Data
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode
below to enable or disable the transmission of programming barcode data (i.e. the
characters under programming barcode) to the host. Default is setting code not send.
02501
Transmit Programming Barcode Data
02500
Not Transmit Programming Barcode Data *
Sound settings
The scanner will have different prompt sounds in use, including boot-up sounds, scan
settings sounds, and scan ordinary codes sounds. You can turn off or turn on the
corresponding prompt sounds according to your needs.
Turn on all sounds: turn on the boot sound, turn on the set code sound, turn on the
ordinary code sound;
Turn off all sounds: turn off the boot sound, turn on the setup code, and turn on the
normal code.
Turn off the normal code sound: turn on the boot sound, turn on the set code sound,
and turn off the normal code sound.
Open Settings Sound: Turn off boot-up sound, turn on Settings Sound, turn off Settings
Sound.
The default is "Turn on all sounds".
014201
Turn on all sounds *
014200
Turn off all sounds
014203
014207
Turn off the normal code sound
Open Settings Sound
Increased/decreased sound
014300
014301
Increased sound
Reduced sound
Sound frequency
0145800
2.0KHZ*
0145AAA
2.7KHZ
Instructions:
Set the scanner frequency to 2730 HZ.
1. Firstly, the decimal 2730 is converted to hexadecimal value, namely AAA.
2. According to the coding rules of setting codes, the corresponding setting codes are
made as [^30145AAA].
3. The settings can be completed by scanning the settings codes directly.
USB transmission speed
This bar scanner supports adjusting data transmission speed. For some non-standard USB
input used in WINDOWS devices, such as the USB interface converted by PS2, the security
and integrity of data output can be reduced by properly reducing the transmission speed
of the bar scanner.
The default is "No USB Fast Transfer".
02301
Allow USB Fast Transfer
02300
No USB Fast Transfer *
You can adjust the transmission speed of USB according to adjusting the delay between
data characters. The smaller the delay, the faster the transmission speed. Conversely, the
slower the transmission speed. You can customize the delay between characters
according to your needs. You can set the delay time range to 0-30MS, and set the code to
^ 3+0145+the hexadecimal value of delay/2MS.
Default is "Delay 4MS".
001500
No delay (fastest)
001502
Delay 4MS*
001504
Delay 8MS
001506
Delay 12MS
Instructions:
Set the inter-character delay to 24MS.
1. First, the value of delay time/2MS is 12, corresponding to the hexadecimal value of 0C.
2. Set the code to ^ 300150C;
3. Making bar codes of setting codes according to the coding of setting codes;
3. The settings can be completed by scanning the settings codes directly.
Image recognition method
The barcode reader supports the recognition of reverse-colored images (anti-white bar
codes). The user can set whether or not the image needs to be reversed according to the
requirements. The default is forward image recognition。
00161
Forward image recognition*
00160
Reverse image recognition
Chapter2 Communication setting
Introduction
When using this barcode to communicate with different hosts, you need to set the
barcode reader to the corresponding communication interface mode.
The user can set the barcode scanner function by scanning one or more setting barcodes.
Users can choose to use USB-KBW, USB-COM, PS2, TTL / RS232 serial communication
interface mode.
USB interface
In the mode of USB interface, there are three kinds of communication protocols to
choose. The default mode is USB-KBW, that is, USB keyboard mode, which simulates the
transmission of data from USB keyboard to host computer.
USB-KBW Mode
By default, the barcode reader uses USB-KBW communication to simulate the USB
keyboard input mode without installing a driver.
000602
USB-KBW*
Country/language keyboard layout selection
Different national languages correspond to the keyboard keys arrangement, symbols, etc.
are different, the barcode scanner can be virtual according to the actual needs of
different countries keyboard.
0005000
USA/China（English）*
0005001
Canada（French）
0005002
Netherlands (Dutch)
0005003
Spain (Spanish - International)
0005004
Argentina (Latin American)
0005005
Brazil (Portuguese)
0005006
Denmark (Danish)
0005007
United Kingdom (British English)
0005008
Italy (Italian)
0005009
France (French)
0005010
Germany (Slang)
0005011
Norway (North Sami)
0005012
Sweden/Finland (Swedish/Finnish)
0005013
Slovak (Slovak)
0005014
Portugal (Portuguese)
0005015
Czech Republic (Czech)
0005016
Belgium (Dutch)
0005017
Turkish-F
Other manuals for ScanAvenger
2
Table of contents
Other cCheck Barcode Reader manuals
