Bartec BCS36x8ex Series Instruction Manual

BARTEC GmbH
Max-Eyth-Straße 16
Fon: [phone]
Support:
em[email protected]
97980 Bad Mergentheim
Fax: [phone]
Download:
http://automation.bartec.de
GERMANY
Internet:
www.bartec.com
FAQ - Frequently Asked Questions
Touch & Mobile Computer
Barcode Scanner
Picklist Mode
Relevant for
Mobile Computer MC27ex-NI
Mobile Computer MC92N0ex series
Mobile Computer MC93ex-NI
Touch Computer TC26ex-NI
Touch Computer TC77ex-NI
Barcode Scanner BCS36x8ex series
Status: May 2022
Reservation: Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.

Table of content
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
1/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
1. Information of this FAQ........................................................................................................................ 2
1.1 Reference documents ...................................................................................................... 2
2. About Picklist Mode.............................................................................................................................. 3
3. Enabling Picklist Mode on the BCS3608ex & BCS3678ex ................................................................... 5
3.1 Issue/Question ................................................................................................................. 5
3.2 Applicable to..................................................................................................................... 5
3.3 Resolution / Answer.......................................................................................................... 5
3.3.1 Using Programming barcodes.......................................................................................... 6
3.3.2 Using 123 Scan Utility ...................................................................................................... 6
4. Enabling Picklist Mode on Android 11 device using DataWedge..................................................... 8
4.1 Issue/Question ................................................................................................................. 8
4.2 Applicable to..................................................................................................................... 8
4.3 Resolution / Answer.......................................................................................................... 9
5. Enabling Picklist Mode on MC92N0ex with Android or Windows using DataWedge.................... 13
5.1 Issue/Question ............................................................................................................... 13
5.2 Applicable to................................................................................................................... 13
5.3 Resolution / Answer........................................................................................................ 13
5.3.1 Datawedge for Windows (WEH 6.5.3 or CE 7.0)............................................................ 14
5.3.2 Datawedge for Android 4.4.4.......................................................................................... 17
6. Enable Picklist Mode in Velocity Client (All touch TE) .................................................................... 20
6.1 Issue/Question ............................................................................................................... 20
6.2 Applicable to................................................................................................................... 20
6.3 Resolution / Answer........................................................................................................ 21

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
2/22
1. Information of this FAQ
Read carefully before commissioning the device.
The FAQ is an additional description to the available Quick Start Guide and part of the device.
The FAQ is directed at all persons who are entrusted with handling the device.
Knowledge of the safety instructions and warnings in this FAQ and strict compliance with them
is essential for safe handling.
‒Carefully read the FAQ and especially the safety instructions before using the device.
‒Make the FAQ accessible to all people who are entrusted with handling the device.
Warnings are used in this FAQ - Frequently Asked Questions to warn of the risks of damage to
property and personal injuries.
1.1 Reference documents
All documents are available online from the following websites:
BARTEC: www.bartec.com or https://automation.bartec.de/mobileE.htm
Document BARTEC
Explanation
Quick Start Guide or User Manual
(BARTEC):
It contains:
Guidelines on commissioning and the safe use of
hand-held scanners (including installation, safety
information related to explosion protection and
information regarding programming)
User Guide (Zebra):
It contains:
Guidelines for commissioning and general use of the
devices (including installation, settings and
information on programming)
Integrator Guide (Zebra):
It contains:
This guide provides information about setting up and
configuring the device and its accessories.
Symbol
Explanation
Important advice and information for the effective, efficient and environmentally
sound use of the product.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
3/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
2. About Picklist Mode
Overview. Picklist mode enables the digital scanner to decode only barcodes that are aligned under the laser
crosshair or LED aiming dot. This feature is useful in applications where multiple bar codes may appear in
the field of view during a decode session and only one of them is targeted for decode. It allows users to
easily select and scan a single barcode from a field of barcodes.
Picklist mode is available on the following BARTEC devices:
Device:
Ex-certification:
Operating system
(status 06 May 2022)
Note:
Barcode scanner
BCS3608ex series
All certifications
None
Supported with all 2D imager versions
BCS3678ex series
All certifications
None
Supported with all 2D imager versions
Touch Computer
TC75ex–NI
All certifications
Android 5.1
Supported with all 2D imager versions
TC75xex–NI
All certifications
Android 8.1
Supported with all 2D imager versions
TC77ex–NI
All certifications
Android 11
Supported with all 2D imager versions
TC26ex–NI
All certifications
Android 11
Supported with all 2D imager versions
Mobile Computer
MC92N0ex series
All certifications
Android 4.4.4
Supported with all 2D imager versions
MC93ex–NI
All certifications
Android 11
Supported with all 2D imager versions
MC27ex–NI
All certifications
Android 11
Supported with all 2D imager versions

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
4/22
Detailed information about the use of all functions can be found in the appropriate Zebra User or
Integrator manual or on their Tech Docs page.
All documents are available online from the following websites:
BARTEC: www.bartec.com or https://automation.bartec.de/indexE.htm
Zebra: https://www.zebra.com/us/en/support-downloads.html
Zebra Tech Docs page: https://techdocs.zebra.com/

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
5/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
3. Enabling Picklist Mode on the BCS3608ex & BCS3678ex
3.1 Issue/Question
How to enable picklist mode in BCS3608ex & BCS3678ex?
3.2 Applicable to
All devices of BCS3608ex & BCS3678ex series.
3.3 Resolution / Answer
Two options available to program it:
1. Use of programming barcodes.
2. Use of Zebra freeware Tool 123 Scan Utility.
Select one of the following picklist modes for the digital scanner:
Disabled Always - Picklist mode is always disabled.
Enabled in Hand-held Mode - Picklist mode is enabled in Hand-held mode.
Enable Always - Picklist mode is always enabled.
Enabled in Hands-free Mode - Picklist mode is enabled in Hands-free mode.
Picklist Mode temporarily overrides the Disable Decode Aiming Pattern parameter. You
cannot disable the Decode Aiming Pattern when Picklist Mode is enabled.

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
6/22
3.3.1 Using Programming barcodes
Parameter # 402 (SSI # F0h 92h).
Scan one of the following picklist modes for the digital scanner:
3.3.2 Using 123 Scan Utility
123 Scan Utility is a freeware utility available on the Zebra support & download page.
https://www.zebra.com/us/en/products/software/scanning-systems/123scan.html
Start 123 Scan Utility.
Connect your scanner with it.
Select the menu “7. General”.
Select the sub menu “System” and scroll down to “Picklist Mode”.
Select one of the following picklist modes for the digital scanner:

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
7/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
8/22
4. Enabling Picklist Mode on Android 11 device using
DataWedge
4.1 Issue/Question
How to enable picklist mode in TC26ex-NI, TC77ex-NI, MC27ex-NI & MC93ex-NI using Datawedge?
4.2 Applicable to
All devices running with Android 11.
Instruction is created on TC77ex-NI with the following software version.
Picklist mode is as well running on later versions or older Android versions (e.g. Android 10).
Possibly the menu navigation to find the picklist mode is different there.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
9/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
4.3 Resolution / Answer
Steps:
1. Go to the app menu, and start “DataWedge”.
2. Select the target profile on the profile screen, for example “Profile0”.

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
10/22
3. Scroll down the page on Profile0 and select “Configure scanner settings”.
4. Scroll down the page on “Configure scanner settings”. and select “Reader params”.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
11/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
5. Select “Picklist” which is disabled by default.
6. Select the hardware or software picklist option.
- Hardware Picklist - Picklist mode is enabled by sending a command to hardware.
- Software Picklist - Picklist feature is handled in the software; no commands are sent
to hardware.
Hardware Picklist
Software Picklist

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
12/22
7. Exit DataWedge.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
13/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
5. Enabling Picklist Mode on MC92N0ex with Android or
Windows using DataWedge
As reference you can use the following Zebra Article ID: 86617725
https://www.zebra.com/us/en/support-downloads/knowledge-articles/evm/Enable-Picklist-
mode.html
5.1 Issue/Question
How to enable Picklist mode on Windows CE 7.0 or WEH 6.5 installed with a 2D imager?
How to enable Picklist mode on Android installed with a 2D imager?
5.2 Applicable to
MC92N0ex with Windows CE 7.0 or Windows WEH 6.5.3 device with a built-in 2D imager (SE4500,
SE4600, or SE4750).
MC92N0ex with Android device with a built-in 2D imager (SE4500 or SE4750).
5.3 Resolution / Answer
Select one of the following picklist modes for the digital scanner:
Disable - Disables Picklist mode; you can decode any barcode within the field of view.
Hardware Picklist - Picklist mode is enabled by sending a command to hardware.
Software Picklist - Picklist feature is handled in the software; no commands are sent to hardware.
Performance may vary on some devices if Hardware or Software Picklist modes are set.

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
14/22
5.3.1 Datawedge for Windows (WEH 6.5.3 or CE 7.0)
Procedure:
1. Open DataWedge setting.
2. Tap Basic configuration.
3. Tap Scanner input.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
15/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
4. Tap on the displayed internal scanner (example, Blockbuster Imager or Long-range Imager).
5. Select Reader Params > More > Picklist mode.
6. Select Hardware or Software reticle to enable it.
Enable Hardware reticle
Enable Software reticle

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
16/22
7. Tap Back until you see the message "saving changes, please wait...".
8. Tap Home, then Exit.
9. Tap OK to close DataWedge settings.

FAQ
Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
17/22
Subject to technical changes.
09/2020
Subject to technical changes.
05/2022
5.3.2 Datawedge for Android 4.4.4
Procedure:
1. Go to app menu.
2. Open DataWedge setting.
3. Select the target profile (example: Profile0).

Touch & Mobile Computer & Barcode Scanner
FAQ: Picklist Mode
FAQ
Subject to technical changes.
05/2022
18/22
4. Scroll down and select Reader params. If not available, scroll down and select Configure scanner
settings.
5. Select Picklist, which is disabled by default.