Certa CTTSCT5DRWB User manual

TOOLBOX STORAGE CABINET
TROLLEY 5 DRAWER
CTTSCT5DRWB

•Keep the drawer slides well lubricated.
•Ensure the cabinet is kept on a flat level surface.
•Do not stand on this product.
•Do not move with power equipment.
•Do not alter this product in any manner.
•Do not let children near the tool cabinet.
•Do not open more than one drawer at a time.
•Do not attach or mount this product to any moving object.
•Max. safe loading capacity for each drawer: 10kg
•Max. safe loading capacity for whole cabinet: 70kg
SAFETY & WARNINGS

No.
Description
No.
Description
1
Handle
6
Screw: M8*12 (x16)
2
Screw: M6*12 (x4)
7
Lock
3
Washer (x4)
8
Drawer mat (x5)
4 Ball-bearing slide (x10) 9 Drawer handle (x5)
5
Swivel castor (x2)
10
Castor (x2)
OVERVIEW

Step 1:
Attach the side handle (1) using the supplied screws (2) and washers (3).
Step 2:
Attach the casters (5 & 10) to the bottom of the cabinet using the supplied screws (6). The
swivel casters (5) must attached on the same side as the handle (1).
ASSEMBLY

Drawer Assembly:
1. Each drawer slide has a black retaining clip. To remove the drawer, the retaining clips
need to be released by pushing lever up and down at the same time and sliding out
the drawer.
2.When assembling the drawer, you need to pull the slide out fully and then align the
track to correctly insert it.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com