Sealey PCT2 User manual

PLASMA CUTTING TABLE/WORKBENCH
- ADJUSTABLE HEIGHT WITH CASTOR
WHEELS
MODEL NO: PCT2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using the workbench.
9Locate workbench in a suitable area where it will not be an obstruction.
9Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Erect unit on a level and solid surface such as concrete.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the unit for any purpose other than that for which it is designed.
8DO NOT clean the unit with any solvents which may damage the surfaces.
9Ensure that the unit is properly and securely assembled before use.
2. NTRODUCTION
Mild steel plasma cutting table/workbench. 32 Replaceable cutting slats, order Model No. PCT2RS for a pack of 10 replacements.
Removable side handles/cable tidy hanging hooks. Adjustable working height 750mm to 1011mm. Lockable castor wheels for easy
 movement.Funnelshapedbasewithslideouttrayforsaferemovalofo󰀨cutsandslag.Suppliedatpackedforeasyselfassembly
using hand tools (not provided). Supports weight capacity of 136kg.
3. SPECIFICATION
Model No.: .................................................................... PCT2
Max. weight capacity................................................... 136 kg
Height range .................................................. 750 - 1011 mm
Assembled dimensions (W x D) .....................1200 x 910 mm
Bench dimensions............................................915 x 910 mm
Replacement parts: Slats (pack of 10) ..................... PCT2RS
PCT2 Issue 1 15/09/20
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Wear safety
footwear

4. CONTENTS
5. ASSEMBLY
NOTE: It is recommended that two people are used to assemble this item.
NOTE: DO NOTfullytightenxingsuntilallareinplace.
5.1. Assemblefootlinks(g1.15)towheels(g1.10)usingxings(g1.16,1.17,and1.18).
5.2. Fixsupportbeams(g1.14)totabsonfootsupportbeams(itemsg1.13andg1.7).
5.3. Fixmainbeams(g1.2,g.1.4)totopoffootsupportsusingxings(g1.21,1.22,1.23).Notepositioningofmainbeams(seeg1).
5.4. Tilttheassemblyandlocatetheassembledfootlinks(from5.1above)intothefootsupportsandtfootsupportpins(g1.24).
5.5. Layplatformbases(g1.12)intolowersection(seeg1).
5.6. Fixfunnelsideplatestomainbeams(g1.2,g1.4)usingxings(g1.21,1.22,1.23).Notepositioningofsideplates(seeg1).
5.7. Fixdrawersupports(g.1.8,g1.11)usingxings(g1.20,1.21,1.22)(seeg1.).
5.8. Fixsidehandles(g1.1)usingxings(g1.16,1.17,1.18).
5.9. Loadslats(g1.3)intotopframe.
5.10. Insertdrawer(g1.9)ontodrawerrunnersindrawersupports(g1.8,g1.11).
5.11. Tightenallxingsandensurethestructureissound,stableandcapableofsafelycarryingaloadofupto138kg.
6. MAINTENANCE
6.1. Clean regularly using non-abrasive cleaner and a damp cloth.
6.2. Before each use check all parts and the integrity of the structure. If damaged or suspect, remove from service and take necessary
action to correct.
Original Language Version
© Jack Sealey Limited
Item Part no. Description
1 PCT2.01 Removable side handles
2 PCT2.02 Main beam, A
3 PCT2RS Replacement slats (Pack of 10)
4PCT2.04 Main beam, B
5 PCT2.05 Funnel side plate, A
6 PCT2.06 Funnel side plate, B
7 PCT2.07 Foot support, A
8PCT2.08 Drawer support, A
9 PCT2.09 Drawer
10 PCT2.10 Wheel (c/w brake)
11 PCT2.11 Drawer support, B
12 PCT2.12 Platform base
13 PCT2.13 Foot support, B
14 PCT2.14 Support beam
15 PCT2.15 Foot link
16 SS1025.S HxHdSetScrewM8x25mm
17 SWM10.S Spring washer M10
18 SN10.S Steel nut M10
19 SS1040.S HxHdSetScrewM10x40mm
20 PCT2.20 ButtonhdsetscrewM8x25
21 SWM8.S SpringwasherM8
22 SN8.S SteelnutM8
23 SS830.S HxHdSetScrewM8x30mm
24 PCT2.24 Foot support pin
PCT2 Issue 1 15/09/20
g.1

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Partssupportisavailableforthisproduct.Pleaseemail[e-mail]ortelephone01284757500
PCT2 Issue 1 15/09/20
Original Language Version
© Jack Sealey Limited