Challenger Manufacturing INFERNO NG1017 User manual

INFERNO 20-IN-1 MULTI-GAME TABLE
TABLE ASSEMBLY INSTRUCTIONS
NG1017

2
Thank you for your purchase of our product.
We work around the clock and around the globe to ensure that our
products maintain the highest possible quality. However, in the rare
instance that your product is defective or missing parts, contact
Challenger Manufacturing at 800-759-0977 to submit parts requests
or warranty claims. Please read the warranty information at the back
of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN
ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
THANK YOU!

PARTS IDENTIFIER (NOT TO SCALE)
3

PARTS IDENTIFIER (NOT TO SCALE)
4

PARTS IDENTIFIER (NOT TO SCALE)
5

ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. The table will be
partially assembled upside down and then turned over onto its legs. This is a heavy game
and turning it over will require at least two strong adults.
2. Remove all of the contents from box and verify that you have all of the parts shown on the
Note: Some parts may be pre-installed or
pre-assembled.
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened if the electric
screwdriver's torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS - NOT
SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
6

ASSEMBLY INSTRUCTIONS
1. To assemble SOCCER TABLE, insert pre-assembled AWAY PLAYER RODS #35, 36 and 37 and
HOME PLAYER RODS #38, 39 and 40 into one SIDE PANEL #18 as shown below. Note: You
may choose either color for home or away teams. Each team should face the opposite goal when
table is turned over - the visible screw head indicates the front of the player. Ensure that the FOAM
BUMPERS #76 and PLASTIC ROD WASHERS #77 are in place before inserting rods into the SIDE
PANELS.
2. Insert PLAYER RODS into remaining SIDE PANEL #18.
grooves. Note: The table is assembled upside down.
7

4. Attach one END PANEL #17 to each end of the table with 1-3/4" FLAT SCREW #6.
5. Attach one CORNER #21 to each corner of the table with 1-1/8" BOLT #2 and 5/16" FLAT
WASHER #5.
6. Attach each PLAYFIELD SUPPORT BRACE #20 underneath SOCCER PLAYFIELD as shown by
fastening to SIDE PANELS with 1-3/4" ROUND SCREW #1.
7. Carefully turn SOCCER TABLE over. Attach one MANUAL SCORER #31 to each end of the
table with 1" FLAT SCREW #8.
8. Attach one HAND GRIP #29 to the marked end of each PLAYER ROD. Attach ROD END CAP
#30 to the opposite end of PLAYER RODS. Note: SOCCER TABLE will be placed on top of assem-
bled BILLIARD TABLE. Follow instructions below to assemble BILLIARD TABLE.
8
ASSEMBLY INSTRUCTIONS (CONT.)ASSEMBLY INSTRUCTIONS (CONT.)

9
9. To assemble BILLIARD TABLE, attach RIGHT LEGS #23 and LEFT LEGS #24 to the corners of
the BILLIARD TABLE BODY #22 as shown below using 1-1/8" BOLT #2 and 5/16" FLAT WASHER
#5 or 1-1/2" WING BOLT #3. Note: 1-1/2" WING BOLT #3 is also used to assemble BASKETBALL
GAME.
10. Attach one LEG PANEL #25 to each side of the table with 1" BOLT #15 and 1/4" FLAT
WASHER #16.
11. Thread one LEG LEVELER #9 onto each LEG. Carefully turn table over.
PLEASE NOTE:
WING BOLT #3 IS ALWAYS USED
INSTEAD OF BOLT #2 ON THE
BACK OF THE TABLE
ASSEMBLY INSTRUCTIONS (CONT.)

10
12. To play HOCKEY, place HOCKEY PLAYFIELD #32B into assembled BILLIARD TABLE.
into assembled BILLIARD TABLE. Insert one TABLE TENNIS NET POST #53 into each side of the
TENNIS TABLE PLAYFIELD at the center line. Attach the TABLE TENNIS NET #52 to each POST.
ASSEMBLY INSTRUCTIONS (CONT.)

11
14. For other GAMES, place GAME BOARD #33 or BASEBALL/FOOTBALL PLAYFIELD #34 into
assembled BILLIARD TABLE.
15. To assemble BASKETBALL GAME, attach LOWER BASKETBALL ARM #12 to the back of
BILLIARD TABLE with 1-1/2" WING BOLT #3. Note: 1-1/2" WING BOLT #3 is already part of BIL-
LIARD TABLE assembly.
16. Attach one UPPER BASKETBALL ARM #13 to each LOWER BASKETBALL ARM and secure
with 5/8” NUT & BOLT #14.
17. Attach BASKETBALL BACKBOARD #26 to UPPER BASKETBALL ARMS with 5/32" NUT &
BOLT #10.
ASSEMBLY INSTRUCTIONS (CONT.)

12
18. Attach BASKETBALL RIM #27 to BASKETBALL BACKBOARD with 5/8" SCREW #7.
19. Attach BASKETBALL SIDE NET #28 by securing to BASKETBALL ARMS as shown with fas-
tening strap. Attach BASKETBALL SIDE NET #28 to BILLIARD TABLE BODY as shown with 3/4"
WING BOLT #4.
ASSEMBLY INSTRUCTIONS (CONT.)

CONGRATULATIONS!
You have now assembled your Game Table.
Please note the Care and Use instructions below to
ensure years of trouble free use of your game table.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.
13

The Inferno 20-in-1 Multi-Game includes the following games:
Please refer to the Assembly Instructions and the Game Play Instructions
to set up and play the games.
14
1 Soccer
2 Pool
3 Glide Hockey
4 Table Tennis
5 Basketball
6 Chess
7 Checkers
8 Ring Toss
9 Horseshoes
11 Backgammon
12 Bowling
13 Finger Football
14 Baseball
15 Tic-Tac-Toe
16 Dice
17 Cards
18 Mini Stick Hockey
19 Bean Bag Toss
20 Football Toss
GAME LIST

Ring Toss
Accessories Needed for Game Play:
1. Rings #74
2. Ring Toss Post #75
How to Play:
The objective is to score the most points by tossing the rings around the post. Before play,
designate a number of points to play to. Each player must stand back and toss his/her rings
wins!
Horseshoes
Accessories Needed for Game Play:
1. Horseshoes #73
2. Ring Toss Post #75
How to Play:
The objective is to score the most points by tossing the horseshoes around the post. Before
play, designate a number of points to play to. Each player must stand back and toss his/her
of the game wins!
Accessories Needed for Play:
1.
2.
How to Play:
into any of the designated scoring areas inside of the triangle. Players take turns pushing their
pucks. Once all of the pucks have been sent down the board, the player with the highest score
wins!
15
GAME PLAY INSTRUCTIONS

Bowling
Accessories Needed for Play:
1. Bowling Pins #70
2. Bowling Ball #71
3.
How to Play:
The objective is to knock down the highest number of pins in each round or“frame.”Set up the
pins and keep track of how many pins have been knocked down per frame. Each player gets
to roll the ball twice per round. The player with the highest score at the end of 10 rounds wins!
Finger Football
Accessories Needed for Play:
1. Finger Football Triangles #55
2. Football Goal Post #54
3.
How to Play:
board. Begin by designating a number of points, or a time limit to play to. Players can score by
-
ers can use traditional football scoring, or they can set up their own rules. The player with the
highest score at the end of the game wins!
Baseball
Accessories Needed for Play:
1. Baseball #62
2. Baseball Bat #63
3. Baseball Markers #64
4.
How to Play:
your team around the diamond based on where the ball lands. For example, if the baseball
lands in the bubble marked “double,” move the baseball marker to second base. Like regular
baseball, each player gets 3 strikes and 3 outs. The player with the highest score at the end of
the game wins!
16
GAME PLAY INSTRUCTIONS (CONT.)

Tic-Tac-Toe
Accessories Needed for Play:
1. Tic-Tac-Toe Grid #41
2. Tic-Tac-Toe Pieces #41
How to Play:
Each player is represented by either the X or the O. Both players take turns placing 1 piece on
-
zontally, or diagonally.
Playing Cards
Accessories Needed for Play:
1. Playing Cards #48
Overview:
There are hundreds of popular card games for kids and adults alike. Variations include:
-Go Fish
-Solitaire
-Crazy Eights
-Spoons
-Memory
Mini Stick Hockey
Accessories Needed for Play:
1. Hockey Pucks #45
2. Hockey Sticks #45
3. Hockey Goal #44
4.
How to Play:
Before beginning game play, designate a number of points or time limit to play to. Use the
mini hockey sticks to push the pucks into your opponent’s goal while protecting your own!
The player who scores the most goals wins!
17
GAME PLAY INSTRUCTIONS (CONT.)

GAME PLAY INSTRUCTIONS (CONT.)
Bean Bag Toss
Accessories Needed for Play:
1. Bean Bags #46
2. Basketball Side Net #28
3. Basketball Backboard #26
4. Lower Basketball Arms #12
5. Upper Basketball Arms #13
How to Play:
Each hole in the bean bag toss target is numbered with a point value. Players stand back and
toss their bean bags into the intended target. The player with the most points at the end of
the game wins!
Football Toss
Accessories Needed for Play:
1. Football #47
2. Basketball Side Net #28
3. Basketball Backboard #26
4. Lower Basketball Arms #12
5. Upper Basketball Arms #13
How to Play:
Each hole in the football toss target is numbered with a point value. Players stand back and
throw the football into the intended target. The player with the most points at the end of the
game wins!
18

90-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects
manship for a period of ninety days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; does not
for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defec-
tive product. During the warranty period, shall repair or replace defective
the purchaser. Shipping charges and insurance are not covered and are the respon-
chaser. Labor charges and related expenses for removal, installation or replacement
components are not covered under this warranty.
reserves the right to make substitutions to warranty claims if parts or unav-
shall not be liable for loss of use of the product or other consequential
expenses or damages incurred by the consumer of any other use. The user assu-
resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to pro-
cess all warranty claims. The model number and part numbers found within the assem-
bly instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
Challenger Manufacturing
in material or work
Challenger Manufacturing
assume any liability
Challenger Manufacturing
parts at no cost to
sibility of the pur
of the product or
Challenger Manufacturing
Challenger Manufacturing
ailable or obsolete.
or incidental costs,
mes all risk of injury
Challenger
Manufacturing