Sega TETRIS GIANT User manual

OWNER'S MANUAL
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
OWNER'S MANUALTETRIS GIANT 420-7246-01
TRC Haneda Building, 2-13-1, Higashikojiya, Ohta-ku, Tokyo 144-0033, Japan
Telephone: [phone] Facsimile: [phone]
© SEGA
Tetris ® & © 1985 -2009 Tetris Holding, LLC. Tetris logo, Tetris theme song and Tetriminos are trademarks of
Tetris Holding, LLC. Licensed to The Tetris Company. Game Design by Alexey Pajitnov. Logo Design by Roger
Dean. All Rights Reserved. Sub-licensed to SEGA.
Certain original characters and music owned by SEGA Corporation: © SEGA
The typefaces included herein are solely developed by DynaComware.
420-7246-01
SEGA CORPORATION

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. After carefully reading and sufciently understanding the warning displays
and cautions, handle the product appropriately. Be sure to keep this manual close to the product or
in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause
a potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause
a slight hazardous situation which can result in personal injury and/or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,
this display is attached to places where the instruction manual should be referred to.
Indicates a "protective earth terminal." Before operating the equipment, be sure to connect
it to the ground.
(The step may be omitted for products in which a power cable with earth is used.)
• Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention.
Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.
• Be sure to turn off the power before working on the machine.
To prevent an electric shock, be sure to turn off the power and unplug the power cable before
carrying out any work that requires direct contact with the interior of the product. If the work is
to be performed in the power-on status, the instruction manual herein always states to that effect.
• Be sure to ground the earth terminal.
(This is not required in the case where a power cable with earth is used.)
This product is equipped with the earth terminal. When installing the product, connect the earth
terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the
product is grounded appropriately, the user can be subject to an electric shock. After performing
repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control
equipment.
• Ensure that the power supply used is equipped with an earth leakage breaker.
Using a power supply which is not equipped with the earth leakage breaker can cause a re when
earth leakage occurs.
• Besuretousefuseswhichmeetthespeciedrating.
(Only for the machines which use fuses.)
Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specicationchanges(removalofequipment,conversionandaddition)not
designated by SEGA are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should
doors, lids and protective parts be damaged or lost, refrain from operating the product, and
contact where the product was purchased from or the ofce herein stated.
SEGA shall not be held responsible for any accidents, compensation for damage to a third party,
resulting from the specications not designated by SEGA.
• Ensure that the product meets the requirements of appropriate electrical
specications.
Before installing the product, check for electrical specications. SEGA products have a
nameplate on which electrical specications are described. Ensure that the product is compatible
with the power supply voltage and frequency requirements of the location. Using any electrical
specications different from the designated specications can cause a re and an electric shock.
• Installandoperatetheproductinplaceswhereappropriatelightingisavailable,
allowing warning labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially
hazardous situations are applied to places where accidents can be caused. Ensure that where the
product is operated has sufcient lighting allowing the warnings to be read. If any label is peeled
off, apply it again immediately. Please place an order with where the product was purchased from
or the ofce herein stated.
• Whenhandlingthemonitor,beverycareful.
(Applies only to products with monitors.)
Some of the monitor parts are subject to high tension voltage. Even after turning off the power,
some portions are still subject to high tension voltage sometimes. Monitor repair and replacement
should be performed only by those technical personnel who have knowledge of electricity and
technical expertise.
• Be sure to adjust the monitor properly.
(Applies only to products with monitors.)
Do not operate the product leaving on-screen ickering or blurring as it is. Using the product
with the monitor not properly adjusted may cause dizziness or a headache to an operator, a
player, or the customers.
• When transporting or reselling this product, be sure to attach this manual to the
product.
* In the case where commercially available monitors and printers are used in this product, only the
contents relating to this product are explained herein. Some commercially available equipment
has functions and reactions not stated in this manual. Read this manual together with the specic
instruction manual of such equipment.
* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any question
arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are casters and adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct way,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cables have cuts and dents?
Are all accessories available?
Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

i
TABLE OF CONTENTS
E0-0912 420-7246-01
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS i
INTRODUCTION iv
Denition of 'Site Maintenance Personnel or
Other Qualied Individuals'...................................................................v
1 HANDLING PRECAUTIONS 1
2 PRECAUTIONS REGARDING INSTALLATION LOCATION 5
2-1 LIMITATIONS OF USAGE....................................................... 5
2-2 OPERATION AREA................................................................. 6
3 PRECAUTIONS REGARDING PRODUCT OPERATION 7
3-1 BEFORE OPERATION............................................................ 7
3-2 DURING OPERATION
(PAYING ATTENTION TO CUSTOMERS) ............................. 8
4 PART DESCRIPTIONS 10
5 ACCESSORIES 12
6 ASSEMBLY AND INSTALLATION 16
6-1 ASSEMBLING THE SCREEN STAND.................................. 18
6-1-1 Assembling the Frame............................................ 18
6-1-2 Attaching the Roof Panel ........................................ 26
6-1-3 Attaching the Banner .............................................. 30
6-2 ASSEMBLING THE CONTROLLER CABINET..................... 33
6-2-1 Attaching the Projector ........................................... 33
6-2-2 Attaching the Halogen Lamp Cover........................ 38
6-3 SETTING UP THE CONTROLLER CABINET....................... 41
6-4 CONNECTING THE POWER CABLE AND
GROUNDING THE CABINET................................................ 43
6-5 ADJUSTING THE POSITION OF THE PROJECTOR
(POWER ON) ........................................................................ 46
6-6 ATTACHING THE CHAIN...................................................... 50
6-7 ASSEMBLY CHECKS ........................................................... 52
6-8 USING ONLY THE CONTROLLER CABINET ...................... 53
6-9 KIDS MODE (ATTACHING THE DESIGN PIECES) ............. 55
6-10 REPLACING THE DENOMINATION SHEET........................ 58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

ii TABLE OF CONTENTS
7 PRECAUTIONS WHEN MOVING THE MACHINE 61
8 GAME DESCRIPTION 63
8-1 GAME OUTLINE.................................................................... 63
8-2 GAME MODE EXPLANATIONS............................................ 64
8-3 GAME FLOW......................................................................... 66
8-4 KIDS MODE........................................................................... 68
9 EXPLANATION OF TEST AND DATA DISPLAY 69
9-1 SWITCH UNIT AND COIN METER....................................... 70
9-2 SYSTEM TEST MODE.......................................................... 71
9-2-1 SYSTEM MENU ..................................................... 72
9-2-2 SYSTEM INFORMATION....................................... 73
9-2-3 RAM TEST.............................................................. 73
9-2-4 I/O TEST................................................................. 74
9-2-5 SOUND TEST......................................................... 75
9-2-6 C.R.T. TEST ........................................................... 76
9-2-7 SYSTEM ASSIGNMENTS...................................... 77
9-2-8 COIN ASSIGNMENTS............................................ 78
9-2-9 BOOKKEEPING ..................................................... 83
9-2-10 BACKUP DATA CLEAR ......................................... 83
9-2-11 CLOCK SETTING................................................... 84
9-2-12 ROM TEST ............................................................. 85
9-2-13 COMPACT FLASH TEST ....................................... 85
9-2-14 NETWORK SETTING............................................. 87
9-3 GAME TEST MODE .............................................................. 91
9-3-1 INPUT TEST........................................................... 93
9-3-2 OUTPUT TEST....................................................... 94
9-3-3 STICK SWING TEST.............................................. 95
9-3-4 GAME ASSIGNMENTS .......................................... 96
9-3-5 BOOKKEEPING ..................................................... 98
9-3-6 BACKUP DATA CLEAR ....................................... 101
9-3-7 RANKING DATA CLEAR...................................... 102
10 COIN SELECTOR 103
10-1 COIN INSERTION TEST ..................................................... 104
10-2 CLEANING THE COIN SELECTOR.................................... 105
10-3 HANDLING A COIN JAM..................................................... 107
11 PROJECTOR 108
11-1 NOTES RELATED TO THE PROJECTOR ......................... 109
11-2 CLEANING THE PROJECTOR ........................................... 110
11-3 LAMP REPLACEMENT ....................................................... 111
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

iii
TABLE OF CONTENTS
SEGA AMUSEMENTS OFFICES
12 REPLACING THE HALOGEN LAMP 112
13 REPLACING THE BUTTON SWITCHES 114
14 PERIODIC INSPECTION 119
15 TROUBLESHOOTING 121
15-1 TROUBLESHOOTING TABLE ............................................ 121
15-2 REPLACING THE SCREEN................................................ 123
16 GAME BOARD (SystemSP) 125
16-1 EXTERNAL VIEW................................................................ 126
16-2 COMPOSITION OF THE GAME BOARD............................ 128
16-3 REMOVING THE GAME BOARD........................................ 129
16-4 REPLACING THE LITHIUM BATTERY............................... 132
16-5 INSTALLING THE SOFTWARE .......................................... 134
16-6 KEY CHIP ............................................................................ 136
17 ERROR MESSAGE 137
18 SWITCHING TO A NAOMI BOARD 139
19 REPLACING THE SHAFT STOPPER
(WITH 8-DIRECTION STOPPER) 144
20 DESIGN RELATED PARTS 148
21 PARTS LIST 149
22 WIRE COLOR CODE TABLE 200
23 WIRING DIAGRAM 201
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

iv INTRODUCTION
INTRODUCTION
This manual is intended to provide detailed descriptions together with all the necessary information covering the
general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"TETRIS®GIANT."
This manual is intended for the owners, personnel and managers in charge of operation of the product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the product, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed in this manual or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word "IMPORTANT" and the symbol below.
Indicates important information that, if ignored, may result in the mishandling of
the product and cause faulty operation or damage to the product.
SPECIFICATIONS
Installation space 1.5 m (59.1 in) [Width] x 1.78 m (70.1 in) [Depth]
Height 2.03 m (79.9 in)
Weight 208 kg (458.6 lb)
Power, maximum current 530 W, 4.70 A Single phase AC 120 V, 60 Hz Area
544 W, 2.60 A Single phase AC 220 V, 50 Hz Area
530 W, 2.50 A Single phase AC 220 V, 60 Hz Area
544 W, 2.50 A Single phase AC 230 V, 50 Hz Area
542 W, 2.40 A Single phase AC 240 V, 50 Hz Area
Power, current 538 W, 5.1 A, (Max.) AC 110 V, 60 Hz; Taiwan
420 W, 3.8 A, (Min.) AC 110 V, 60 Hz; Taiwan
Screen Size 70 Type (with screen stand attached)

v
INTRODUCTION
Procedures not described in this manual or marked as 'to be carried out by site
maintenancepersonnelorotherqualiedprofessionals'shouldnotbecarried
out by personnel without the necessary skill or technology. Work carried out by
unqualiedpersonsmaycauseseriousaccidents,includingelectrocution.
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions that potentially dangerous procedures should only
be carried out by professionals with the appropriate specialized knowledge.
The 'site maintenance personnel or other qualied professionals' mentioned in this manual are dened as follows:
Site maintenance personnel:
Persons with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of
units/expendable parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, involved in design, production, testing or maintenance
of amusement equipment. Should have graduated from technical school or hold similar qualications in electrician/
electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Denitionof'SiteMaintenancePersonnelorOtherQualiedIndividuals'

1
HANDLING PRECAUTIONS
● Beforeperformingwork,besuretoturnthepoweroff.Performingthework
without turning the power off can cause an electric shock or short circuit. In the
case work should be performed in the status of power on, this manual always
states to that effect.
● Toavoidanelectricshockorshortcircuit,donotpluginorunplugquickly.
● Toavoidanelectricshock,donotpluginorunplugwithawethand.
● Donotexposepowercablesorearth(ground)wiresonthesurface,(oor,
passage,etc.).Ifexposed,thepowercablesandearth(ground)wiresare
susceptible to damage. Damaged cables and wires can cause an electric shock
or short circuit.
● Toavoidcausingareoranelectricshock,donotputthingsonordamagethe
power cables.
● Whenorafterinstallingtheproduct,donotunnecessarilypullthepowercable.
Ifdamaged,thepowercablecancauseareoranelectricshock.
● Incasethepowercableisdamaged,askforareplacementthroughwherethe
productwaspurchasedfromortheofcelistedinthismanual.Usingthepower
cableasisdamagedcancausere,anelectricshockorleakage.
● Besuretoperformgroundingappropriately.Inappropriategroundingcancause
an electric shock.
● BesurethatconnectionssuchasICboardaremadeproperly.Insufcient
insertion can cause an electric shock.
● Specicationchanges,removalofequipment,conversionand/oraddition,not
designated by SEGA are not permitted.
- Failuretoobservethismaycauseareoranelectricshock.Non-compliance
withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe
players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage, compensation for damage to a
thirdparty,causedbyspecicationchangesnotdesignatedbySEGA.
● Besuretoperformperiodicmaintenanceinspectionshereinstated.
1 HANDLING PRECAUTIONS
When installing or inspecting the product, be very careful of the following points and pay attention to ensure that the
player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the product.
1

2HANDLING PRECAUTIONS
●FortheICboardcircuitinspections,onlythelogictesterisallowed.Theuseofa
multiple-purpose tester is not permitted, so be careful in this regard.
●Donotturnthepoweronandoffcontinuously.Repeatedlyturningthepoweron
and off may cause product malfunction or parts damage.
●Somepartsarenotdesignedandmanufacturedspecicallyforthisgame
machine.Themanufacturersmaydiscontinue,orchangethespecicationsof
such general-purpose parts. If this is the case, SEGA cannot repair or replace a
failedgamemachinewhetherornotawarrantyperiodhasexpired.
1

3
HANDLING PRECAUTIONS
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical
Specications. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the
date of production. Also, improvements and modications might have been made after the publication of this
manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or
incorporated in the places where a potentially hazardous situation could arise. The warning displays are intended
for accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing
work. Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing
maintenance, be very careful of the warning displays. It is especially important that any complex repair and
replacement work not mentioned herein should be performed by those technical personnel who have knowledge of
electricity and technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.
CONTROLLER CABINET
1
440-WS0226-EG
440-WS0143-EG
Serial No. Display
Electrical Specications Display

4HANDLING PRECAUTIONS
1440-WS0293-EG
DKC-1007-01DKC-1007-01
DKC-0006-01

5
PRECAUTIONS REGARDING INSTALLATION LOCATION
2-1 LIMITATIONS OF USAGE
2
PRECAUTIONS REGARDING INSTALLATION LOCATION
Thisproductisanindoorgamemachine.Donotinstallitoutside.Evenindoors,
avoidinstallinginplacesmentionedbelowsoasnottocauseare,electric
shock,injuryand/ormalfunction.
- Places subject to rain or water leakage, or places subject to high humidity in the
proximityofanindoorswimmingpooland/orshower,etc.,orplaceswherea
waterjet(highpressurewashingdevice)couldbeused.
- Places subject to direct sunlight, or places subject to high temperatures in the
proximityofheatingunits,etc.
- Placeslledwithinammablegasorvicinityofhighlyinammable/volatile
chemicals or hazardous matter.
- Dusty places.
- Sloped or unstable surfaces.
- Placessubjecttoanytypeofviolentimpact.
- Vicinityofanti-disasterfacilitiessuchasreexitsandreextinguishers.
- Areaswherethetemperatureexceedstheapplicabletemperature(ambient
temperature) range of 5 to 30 degrees centigrade (41 to 86 degrees Fahrenheit.)
● Besuretochecktheelectricalspecications.Ensurethatthisproduct
iscompatiblewiththelocation'spowersupply,voltage,andfrequency
requirements.Aplatedescribingelectricalspecicationsisattachedtothe
product.Non-compliancewiththeelectricalspecicationscancauseareand
electric shock.
● Thisproductrequiresabreakerandearthmechanismaspartofthelocation
facilities.Usingtheproductwithoutthesecancauseareandelectricshock.
● Besuretouseanindependentpowersupplyequippedwithanearthleakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreakofreifapowersurgeoccurs.
● Puttingmanyloadsononeelectricaloutletcancausegenerationofheatanda
reresultingfromoverload.
● Ensurethattheindoorwiringforthepowersupplyisratedat15Aorhigher(AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area). Non-
compliancewiththeelectricalspecicationscancauseareandelectricshock.
● Whenusinganextensioncord,ensurethatthecordisratedat15Aorhigher(AC
100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord rated
lowerthanthespeciedratingcancauseareandelectricshock.
2

6PRECAUTIONS REGARDING INSTALLATION LOCATION
Electricity Consumption:
MAX. 4.70 A AC 120 V, 60 Hz
MAX. 2.60 A AC 220 V, 50 Hz
MAX. 2.50 A AC 220 V, 60 Hz
MAX. 2.50 A AC 230 V, 50 Hz
MAX. 2.40 A AC 240 V, 50 Hz
MAX. 5.1 A AC 110 V, 60 Hz Area <TAIWAN>
2-2 OPERATION AREA
● Forsafeoperation,useandoperatethisproductinanareameasuringatleast
1.7 m (66.9 in) in width and 2.4 m (94.5 in) in depth. The area prescribed in this
manualiscertainlynecessaryatleast,forifoneshouldfalloverandhittheir
head against something, there could be a serious accident.
● Besuretoprovidesufcientspacespeciedinthismanual.Donotallowobjects
toblocktheventilationports.Itcancausegenerationofheatandare.
● SEGAshallnotbeheldresponsiblefordamageorcompensationfordamageto
athirdparty,resultingfromthefailuretoobservethisinstruction.
To install this product, the entrance must be at least 0.8 m (31.5 in) in width and 1.5
m (59.1 in) in height when packing.
2
At least 1.7 m (66.9 in)
At least 2.4 m (94.5 in)
At least 2.3 m (90.6 in)
NOTE: The height of the cabinet is 2.03 m (79.9 in), but
a space with a height of at least 2.3 m (90.6 in)
will be necessary when assembling it.

7
PRECAUTIONS REGARDING PRODUCT OPERATION
Inordertoavoidaccidents,checkthefollowingbeforestartingtheoperation:
● Toensuremaximumsafetyfortheplayersandthecustomers,ensurethatwhere
theproductisoperatedhassufcientlightingtoallowanywarningstoberead.
Operationunderinsufcientlightingcancausebodilycontactwitheachother,
hittingaccident,and/ortroublebetweencustomers.
● Checkifalloftheadjustersareincontactwiththesurface.Iftheyarenot,the
cabinetcanmoveandcauseanaccident.
● Donotputanyheavyitemonthisproduct.Placinganyheavyitemonthe
product can cause a falling down accident or parts damage.
● Donotclimbontheproduct.Climbingontheproductcancausefallingdown
accidents.Tocheckthetopportionoftheproduct,useastep/stepladder.
● Toavoidelectricshock,checktoseeifdoor&coverpartsaredamagedor
omitted.
● Donotplacethefollowingitemsontopoftheproduct,insidethebucket,nearby
the product or hang them from the ceiling. Doing so could result in electric
shock,shortcircuitsand/ordamagetotheparts.
Flowervases,owerpots,cups,watertanks,cosmetics,andreceptacles/
containers/vesselscontainingchemicalsandwater.
3-1 BEFORE OPERATION
3
PRECAUTIONS REGARDING PRODUCT OPERATION
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
● Besuretoperformappropriateadjustmentofprojector.Foroperationofthis
product,donotleavemonitor'sickeringordeviationasis.Failuretoobserve
thiscanhaveabadinuenceupontheplayers'orthecustomers'physical
conditions.
● Itissuggestedtoensureaspaceallowingtheplayerswhofeelsickwhile
playing the game to take a rest.
● Toavoidinjury,besuretoprovidesufcientspacebyconsideringthepotentially
crowdedsituationattheinstallationlocation.Insufcientinstallationspacecan
causecontact,collisions,and/ortroublebetweencustomers.
● Cleantheplacesthataretoucheddirectlybycustomers(players)onadaily
basis, and check to make sure that there are no scratches or cracks on the
surface. Scratches or cracks can cause injury to the customer.
● Customerscouldgettheirngerscaughtinbetweenorcutonthejointsofthe
door and cabinet. Check to make sure that the door is not loose and the joints
are properly aligned before operation each day.
3

8PRECAUTIONS REGARDING PRODUCT OPERATION
3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
● Forsafetyreasons,donotallowanyofthefollowingpeopletoplaythegame.
- Those who need assistance such as the use of apparatus when walking.
- Thosewhoareintoxicatedorundertheinuenceofdrugs.
- Persons who disregard the product's warning displays.
● Instructthosewhofeelsickduringplaytohaveamedicalexamination.
● Toavoidinjuryfromfallsandelectricshocksduetospilleddrinks,instructthe
playernottoplaceheavyitemsordrinksontheproduct.
● Toavoidelectricshockandshortcircuits,donotallowcustomerstoput
handsandngersorextraneousmatterintheopeningsoftheproductorsmall
openings in or around the doors.
● Toavoidfallsandresultinginjury,immediatelystopthecustomerfromleaning
against or climbing on the product, etc.
● Toavoidelectricshockandshortcircuit,donotallowcustomerstounplugthe
powerplugwithoutajustiablereason.
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
● Forsafetyreasons,donotallowanyofthefollowingpeopletoplaythegame.
- Thosewhohaveexperiencedmuscleconvulsionorlossofconsciousness
whenplayingvideogames,etc.
- Thosewhohaveneckorspinalcordproblems.
- Thosewhohavehighbloodpressureoraheartproblem.
- Those who are not in good health.
- Pregnant women.
- Persons susceptible to motion sickness.
● Evenplayerswhohaveneverbeenadverselyaffectedbylightstimulusmight
experiencedizzinessorheadachedependingontheirphysicalconditionwhen
playingthegame.Smallchildrenareespeciallylikelytoexperiencethese
symptoms. Caution guardians of small children to keep watch on their children
during play.
● Immediatelystopsuchviolentactsashittingandkickingtheproduct.Such
violentactscancausepartsdamageorfallingdown,resultingininjurydueto
fragments and falling down.
● Therecommendedheightforplayingthegameisatleast130cm(51.2in).Donot
set up a stool in front of the product for customers who are not tall enough to
play the game as it could result in injury. Also, caution customers who attempt
to play while sitting or standing on top of the controller cabinet.
3

9
PRECAUTIONS REGARDING PRODUCT OPERATION
Thereisaventonthecontrollercabinet.Becarefulnottosetobjectsontopofit.
3

10 PART DESCRIPTIONS
4 PART DESCRIPTIONS
SCREEN STAND
4
ROOF PANEL
SIDE BANNER L
1P JOYSTICK
SERVICE DOOR
CASH BOX DOOR
2P JOYSTICK
JOINT BRACKET R
Opposite side: JOINT BRACKET L
SIDE DOOR R
Opposite side: SIDE DOOR L
CHAIN
SIDE BANNER R
ROOF FRAME
POST FRAME
FOOT FRAME L
CROSS FRAME
FOOT FRAME R
BACK PANEL
SCREEN
CENTER BANNER

11
PART DESCRIPTIONS
CONTROLLER CABINET
Dimensions and Weights for Major Parts
ITEMS Width x Depth x Height Weight
SCREEN 1,482 mm (58.3 in) x 1,126 mm (44.3 in) x 40 mm (1.6 in) 26 kg (57.3 lb)
ROOF PANEL 1,491 mm (58.7 in) x 1,213 mm (47.8 in) x 15 mm (0.6 in) 22 kg (48.5 lb)
BACK PANEL 1,038 mm (40.9 in) x 677 mm (26.7 in) x 15 mm (0.6 in) 9 kg (19.8 lb)
FOOT FRAME 33 mm (1.3 in) x 1,517 mm (59.7 in) x 75 mm (3.0 in) 6 kg (13.2 lb)
POST FRAME 33 mm (1.3 in) x 1,750 mm (68.9 in) x 70 mm (2.8 in) 5 kg (11.0 lb)
ROOF FRAME 31 mm (1.2 in) x 1,110 mm (43.7 in) x 51 mm (2.0 in) 4 kg (8.8 lb)
CROSS FRAME 140 mm (5.5 in) x 1,040 mm (40.9 in) x 52 mm (2.0 in) 3 kg (6.6 lb)
CONTROLLER CABINET 1,324 mm (52.1 in) x 778 mm (30.6 in) x 1,098 mm (43.2 in) 106 kg (233.7 lb)
4
PROJECTOR DOOR
BACK DOOR
LAMP COVER
AC UNIT