DMI Sports Prince PT400 User manual

DMI Sports For Customer Service Call 1.800.399.4402
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
375 Commerce Drive
Fort Washington PA, 19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new Prince
Table Tennis table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number _______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
PT400
0100605

DMI Sports For Customer Service Call 1.800.399.4402
Please Keep Your Instructions! (You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this game. Please refer to the
Parts Identifier on the following page and be sure that all parts have been included.
This product is manufactured according to the ITTF standards (International Table Tennis Federation),
and includes national and international patents. Be careful not to over tighten any screws, nuts or bolts.
DMI Sports Inc. warranties this product for one year from the purchase date for any manufacturing or
material defect. High-density chipboard is warranted for one year from date of purchase. Although we
at DMI Sports are dedicated to giving our customers the highest quality products, occasionally a part
may be missing. If you are missing a part, or if you have any questions, please call our customer service
department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach
us at: www.dmisports.com.
Do not return the game to the store. Please contact us first at: 1.800.423.3220 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS TENNIS TABLE
-2-

DMI Sports For Customer Service Call 1.800.399.4402
TOOLS REQUIRED FOR ASSEMBLY:
• Phillips Head Screwdriver (or Electric Screwdriver) Not Included
• Wrench Set - Not Included
• Hammer - Not Included
PARTS IDENTIFIER
HARDWARE PARTS - Parts are NOT represented to scale)
H1 H2 H3 H4
H5 H6 H7 H8
5/16” Wing Nut
TTPH118
Large Lock Nut
TTPH120
1/4” Phillips Screw
TTPH107
1/4” Hex Nut
TTPH114
Qty. 4
Qty. 8
Qty. 8 Qty. 20 Qty. 4
Qty. 8 Qty. 4 Qty. 4 Qty. 4
5/16” Large Bolt
TTPH115
5/16” Small Bolt
TTPH116
5/16” Washer
TTPH119
5/16” Hex Nut
TTPH117
NOTE: The following parts are pre-assembled items and listed as replacement items only. Please
refer to the Parts Re-Order Form on the last page of this manual should you find the need to
replace these and all other parts.
• RPPT400-TTPH112 (8) M6 x 16 screws are used to attach the Crossbar TTPM107 to the
Outer Legs TTPM106
• RPPT400-TTPH122 (8) #12 x 24 screws and RPPT400-TTPH113 (8) #12 Hex Nuts are used
to attach the Outer Legs TTPM105 to the TTPM11 L and TTPM111R Leg stays in addition
to the TTPM110 angle bracket.
H9
#10 Tek Screw
TTPH099
Qty. 4
-3-
H10
3/8” Washer
TTPH130
Qty. 4

DMI Sports For Customer Service Call 1.800.399.4402
PARTS IDENTIFIER
ASSEMBLY PARTS
P1 P2 P3 P4
P5 P6 P7 P8
P9 P10 P11 P12
P14P13
Qty. 8
Qty. 8
Plastic Wheel
TTPP101
Wheel Bracket
TTPP102
Table Frame
TTPM102
Cross beam
TTPM103
Short Brace
TTPM104
Plastic Ball Holder
TTPP104
Safety Catch Ring
TTPP107
Safety Catch
TTPP108
Net Holder
TTPP110
Carriage Tray
TTPP105
Plastic Leg Caps
TTPP113
Frame Plastic Cover
TTPP117
Guide Plastic Cover
TTPP118
Nylon Net
TTPP119
1/2 Assembled Acekit
RPACEKIT-HALF
Table Bracket, Metal
TTPM110
P16P15
Qty. 4 Qty. 2 Qty. 1
Qty. 4 Qty. 2 Qty. 4 Qty. 4
Qty. 2 Qty. 4Qty. 2 Qty. 4
Qty. 4 Qty. 1 Qty. 2 Qty. 12
P18P17 Qty. 4 Qty. 2
Safety Catch Support
TTPP111
Outer Leg
TTPM105
NOTE: P8, P23 and P16
through P21 come pre-
assembled to P15. They are
only listed here as replace-
ment parts should there be a
problem with them.
P19
Leg Cross Bar
TTPM108
P20
End Apron
TTPM124
Qty. 2 Qty. 2
P21 Qty. 4 P22 Qty. 4
Side Apron
TTPM125
Plastic Corner
TTPP122
-4-
Edge Support
TTPM129
P23 Qty. 2

DMI Sports For Customer Service Call 1.800.399.4402
STEP 3. IF NOT PRE-ASSEMBLED
(Fig. 3.1) attach the metal ring
(P7) to the end (hole) of each
safety catch (P8). Make sure the
safety catch works properly by pulling
the metal ring.
Attach Plastic Corners
using an (H9) screw, attach the
(P22) plastic corners to the
pre-assembled end
and side aprons.
Prince Match FSA - Code: PT400 - Assembly Instructions
(H1)
(H6)
(P2)
(P1)
(H4)
FIG. 2.1
FIG. 2.3
FIG. 2.2
FIG. 3.1
STEP 1. Separate all parts according to the assembly steps.
(P9)
(P3)
(P6)
(P3)
(H3)
(H5) (P4)
(H2)
IMPORTANT!
Press (Wheel Assembly)
into carriage as indicated in
FIG. 2.2 and bolt to carriage
frame with lock nut (H6).
(P8)
(P7)
Note: FIG 3.1 comes fully assembled
to (P15).
STEP 2. (Fig. 2.1) Locate two (P3) carriage pieces (Tabel Frame) and attach (P2) into the base holes
provided using assembly hardware parts (H6) and (H10). Attach two (P1) wheels to (P2)
wheel bracket using (H1) and (H4). (If too tight, the wheels will not spin) Repeat this step for
the remaining wheels. There will be four double wheels when Step 2. is complete. Washer (H11)
can be found with Plastic Corners (P22) within seperate bag in packaging.
(P19)
(P15)
(P22) (H9)
-5-
(P23)
(H10)
DO NOT OVER TIGHTEN BOLTS
AT PIVOT POINT (H6).

DMI Sports For Customer Service Call 1.800.399.4402
STEP 4. (Fig. 4.1) With two adults, lift table as shown. One side at a time, fit the shoulder of the safety
catch into the track of the frame (P3). Lower the table as you depress the spring loaded plunger
on the safety catch. Following the track, the plunger will locate in the uppermost holes. While
continuing to support the table, depress the plungers again on both sides and lower the table
until the plungers snap into the lower holes. Maintain a hold of the table top until both braces
(P5) have been attached. Repeat this step for the other side.
(Fig. 4.2) Find the plastic tabs on the carriage tray (P10) and attach to carriage (P3).
(Fig. 4.3) With bolts (H2), wing nuts (H5) and washers (H3), attach the brace (P5) to the
carriage frame. Find screws (H7), washers (H3) and nuts (H8) and fasten each brace (P5) to
the table bracket (P16). Insert plastic cap (P12).
DO NOT OVER TIGHTEN THIS PIVOT POINT.
(Fig. 4.4) Closed position.
(Fig. 4.5) Insert the frame guide plastic cover (P13) in the carriage frame channels (P3).
AFFIX BOTH SIDES OF THE NET AT THE SAME TIME GRADUALLY.
Note: When inserting plastic caps or covers (P11, P12 and P13) gently hammer into place.
Care and Maintenance
Cleaning your table
Use a soft damp (not wet) cloth only. DO NOT USE ANY CHEMICALS, ABRASIVE OR CLEANING PRODUCTS on
the playing surface.
Maintenance of you table
All moving parts must be oiled including the pivot points. This will insure ease of use and safety of your table.
This table must be stored indoors to avoid damage to the surface. The dampness and temperature changes can
cause wood to warp, swell or blister.
Note: Illustrations for Step 4. are on the following page.
-6-

DMI Sports For Customer Service Call 1.800.399.4402
(P5)
(P16)
(H3)
(H2)
FIG. 4.3
(H8)
(H7)
Position the safety catch
device in the carriage
frame channels as seen in
FIG. 4.1.B
(P3)
(P14)
Prince Match FSA - Code: PT400 - Assembly Instructions
(P15)
(P13)
(P3)
STEP 4. Illustrations
FIG. 4.1
FIG. 4.4FIG. 4.5
(P10)
(H2)
(P12)
(H5) (H3)
FIG. 4.2
(P3)
FIG. 4.1.B
(P11)
(P11)
-7-
(H3)
DO NOT OVER TIGHTEN BOLTS
AT PIVOT POINT (H8) and (H5).

DMI Sports For Customer Service Call 1.800.399.4402
-8-
APPLYING LABELS
The very last step in completing the assembly of your new Prince Table Tennis table involves applying
the labels to the proper locations on the table. There are four types of labels to be applied.
#1 is the Style label. There are four style lables. Each of the four labels are applied to the four corners
of the tables side aprons as shown below.
#2 is the Crossbar label. There are two crossbar labels. Each crossbar label is applied to each of the
two crossbars on your table as shown below.
#3 is the Carriage Tray label. There are two tray labels. One of each of these labels will be applied to
each carraige tray on your table.
#4 is the Tabel Frame label. There are two table frame labels. Each of these labels will be applied to
the two table frames as shown below.
The labels represented here are not of actual size or color.
Note: It is recommended that you write the model number on the under-side of this table for future
reference.
#1
#2
#3
#4
#1
#2
#3
#4

DMI Sports For Customer Service Call 1.800.399.4402
RECOMMENDATION OF USE AND PRECAUTIONS
!
Anyone using or handling this table tennis table must always follow the illustrated instruc-
tions attached to the back of the board and be fully aware of the operating instructions.
1. Handling the table, (Assembly, open, close or to store) should always be done by two adults to prevent
accident or injury.
2. Be sure that no persons or objects are in the way of the boards when opening the table.
3. Do not put heavy objects on the table.
4. Do not sit on the table.
5. Do not clean the table with solvents or any other aggressive product because it could damage the
paint fi nish.
6. Do not use sharp objects on the board or painted surface.
7. If the table is used for purposes other than playing table tennis, cover the surface to prevent any
damage.
8. Request proof of purchase and keep it during the warranty period.
9. Under no circumstances is the manufacturer responsible for direct or indirect damages
including loses of benefi ts or any other commercial damage occurred by the use of the purchased
product.
10. The functioning and storage of this product should always be supervised by an adult.
11. Do not store or handle the table on an unstable fl oor surface.
12. If safety device malfunction occurs, secure table tops until the problem is solved.
13. To extend the life of this product, (outdoor table or indoor table) protect it from moisture
or severe climate changes.
NOTE: Although we at DMI Sports are
dedicated to giving our customers the
highest quality products, occasionally
a table may be damaged in shipping.
If you fi nd that it is necessary to return
your table to DMI Sports, please repack
the table as shown here.
-9-

DMI Sports For Customer Service Call 1.800.399.4402
H1
H2
H3
H4
H5
H6
H7
H8
H9
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
TTPH115
TTPH116
TTPH119
TTPH117
TTPH118
TTPH120
TTPH107
TTPH114
TTPH099
TTPP101
TTPP102
TTPM102
TTPM103
TTPM104
TTPP104
TTPP107
TTPP108
TTPP110
TTPP105
TTPP113
TTPP117
TTPP118
TTPP119
RPACEKIT-HALF
TTPM110
TTPP111
TTPM105
TTPM108
TTPM124
TTPM125
TTPP122
TTPM129
TTPH112
TTPH122
TTPH113
TT400LABELS
5/16” Large Bolt
5/16” Small Bolt
5/16” Washer
5/16” Hex Nut
5/16” Wing Nut
Large Lock Nut
1/4” Phillips Screw
1/4” Hex Nut
#10 Tek Screw
Plastic Wheel
Wheel Bracket
Table Frame
Cross beam
Short Brace
Plastic Ball Holder
Safety Catch Ring
Safety Catch
Net Holder
Carriage Tray
Plastic Leg Caps
Frame Plastic Cover
Guide Plastic Cover
Nylon Net
1/2 Assembled Acekit
Table Bracket, Metal
Safety Catch Support
Outer Leg
Leg Cross Bar
End Apron
Side Apron
Plastic Corner
Edge Support
M6 x 16 Screw
#12 x 24 Screw
#12 Hex Nut
Match Label Sheets (1 of 2)
UNIT PRICE TOTAL AMOUNT
Subtotal:
(PA Residents Add 6% State Sales Tax:)
Shipping and Handling Charges:
TOTAL:
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
PARTS RE-ORDER FORM PT400 Table Tennis Table
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE: ZIP CODE:
Send this form along with your
check or money order payable to:
DMI SPORTS
375 Commerce Drive
Fort Washington, PA 19034
www.dmisports.com
SHIPPING AND HANDLNG:
Up to $15.00 add $2.00 for S&H
Over $15.00 CALL
1.00
1.00
.50
.50
.50
.50
.50
.50
.50
2.50
2.50
20.00
20.00
10.00
4.50
1.00
5.00
5.00
7.50
1.00
1.00
1.00
9.50
175.00
8.00
3.00
15.00
15.00
12.00
12.00
3.00
12.00
1.00
1.00
1.00
4.50
REF. PART# DESCRIPTION
QTY