Charter Communications UR4-EXP-CHD2 User manual

Universal Remote Control, Inc.
www.universalremote.com
OCE-0005H Rev 02 (03/09/04)
Operating Instructions
For Charter
Communications 4-in-1
Remote Control
The remote control is designed to operate the
Scientific-Atlanta Explorer and Motorola DCT
set top boxes. You can also control TV's, VCR’s
DVD's and Audio equipment.
CABLE : Cable Converters
TV : Televisions VCR : VCRs and DVDs
AUX : Audio Receivers, DMX, DCR, etc.
Introduction
1
Default State:
Device Default set to Cable for SA Explorer series.
For Motorola DCT series re-program CBL to
code 002.
Volume Default: TV volume and mute through
the TV, with the option of controlling volume
and mute through the Cable box or Audio. Refer
to section Gfor programming the volume and
mute through your Cable box or Audio.
Channel Default: CABLE channel and number
keys through the CABLE, with the option of
controlling channel and number keys through
the TV or VCR.
Refer to section Ffor programming the channel
and number keys through your TV or VCR.
Operations
4
Replacing Batteries
2
Before you program or operate the remote
control, you must install two new AA alkaline
batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
Button Functions
3
Programming the Remote Control
5
A. Three-Digit Code Programming Method.
The remote control can be programmed by entering in a three-digit code number that
corresponds to a particular manufacturer or brand of Audio/Video equipment. The three-digit
code numbers are listed in the code table of the instruction manual.
STEP1 Turn on the equipment you wish to program. (TV, VCR, DVD or AUX)
STEP2 Press the [SELECT] button and [MUTE] button simultaneously for 3 seconds. The
device LED's blink in sequence (TV-VCR-AUX-CBL-TV)
STEP3 Release the buttons when the desired device button is blinking (the device LED will
then remain lit).
*Tip : The device LED will stay lit for 20 seconds. The next step must be entered while the LED
is on.
STEP4 Point the remote control toward the
equipment and enter the three-digit
code number assigned to your
brand from the code tables.
*Tip : The equipment will turn off when the
correct three-digit code number has
been entered. You can verify that you
selected the correct code by pressing
the [POWER] button. The equipment
should turn on or turn off.
*Note : If there is more than one three-digit
number listed for your brand, try
one code number at a time until
your equipment turns off.
STEP5 Store the three-digit code number
by pressing the [SELECT] button.
The device LED will blink twice to
confirm that the code has been
stored.
*Note : Try all the functions on the remote
control. If any of the functions do
not work as they should, repeat
from Step 2 using the next three-
digit code number from the same
brand list.
B. Auto Search Method.
If the three-digit code numbers assigned to
your brand do not turn off your equipment or
the code tables do not list your brand, you
can use the Auto Search Method to find the
correct three-digit code number for your
equipment by the following steps:
STEP1 Turn on the equipment you wish to
program. (TV, VCR, DVD or AUX)
STEP2 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP3 Release the buttons when the
desired device button is blinking
(the device LED will then remain lit).
*Tip : The device LED will stay lit for 20
seconds. The next step must be
entered while LED is on.
STEP4 Press the [CH+] or [CH-] button one
at a time or keep it pressed. The
remote will emit a series of power
on/off commands. Release the
[CH+] or [CH-] button as soon as the
equipment turns off.
*Tip : You can verify that you selected the
correct code by pressing the
[POWER] button. The equipment
should either turn on or turn off.
STEP5 Press the [SELECT] button to store
the code. The device LED will blink
twice to confirm that the code
has been stored.
C. To Find the Three Digit Code
Number That was Stored in the
Device.
STEP1 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP2 Release the buttons when the
desired device button is blinking (the
device LED will then remain lit).
*Tip : The device LED will stay lit for 20
seconds. The next step must be
entered while the LED is on.
STEP3 Press the [INFO] button.
The device LED will blink number of
times indicating the number of each
digit of the code number. Each digit
is separated by a 1 second interval
of the LED being turned off.
Example : One blink, three blinks and eight
blinks with an interval of 1
second of LED being turned off,
indicates the code number 138.
*Note : Ten blinks is equal to the number 0.
D. Programming a Second TV to AUX
Mode.
STEP1 Turn on the TV you wish to program.
STEP2 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP3 Release the buttons when the [AUX]
device LED is blinking (the [AUX]
device LED will then remain lit).
STEP4 Hold down the [MUTE] button. The
device LED's will begin blinking in
sequence again. Release the
[MUTE] button when the [TV] device
LED is blinking (the [TV] device LED
will then remain lit).
*Tip : The device LED will stay lit for 20
seconds. The next step must be
entered while the LED is on.
STEP5 Point the remote control toward the
equipment and enter the three-digit
code number assigned to your TV
brand from the code tables.
*Tip : The equipment will turn off when the
correct three-digit code number has
been entered. You can verify that you
selected the correct code by pressing
the [POWER] button. The equipment
should turn on or turn off.
STEP6 Store the three-digit code number
by pressing the [SELECT] button.
The [AUX] device LED will blink
twice to confirm that the code has
been stored.
E. Programming the VOD Button.
This is designed to program the VOD button
so that it can access video on demand with
one button press.
The VOD button is factory defaulted to Ch 999 .
To re-program to a different channel:
STEP1 Press the [CBL] button.
STEP2 Press the [VOD] button and the
[SELECT] button simultaneously for
3 seconds. The [CBL] button will
turn on for 20 seconds.
STEP3 Press the Numbers of the desired
channel to become the new Macro.
(e.g. 123)
STEP4 Press the [CH+] button to save the
new Macro you stored.
The [CBL] button will blink twice to
confirm.
F. Programming Channel Control.
By following the steps below, the you can
program the channel controls (channel UP,
and channel DOWN) from one device to
operate in another device mode.
The default channel control settings on the
remote control is as follows:
CBL : CBL T V : CBL
VCR : VCR AUX : AUX
If you wish to store the TV channel control in
TV mode, use the following steps.
STEP1 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP2 Release the buttons when the [TV]
device LED is blinking (the [TV]
device LED will then remain lit).
*Tip : The device LED will stay lit for 20
seconds. The next step must be
entered while the LED is on.
STEP3 Press the [VOL-] button.
STEP4 Press the [TV] button.
The device LED will blink twice to
confirm the programming.
To return to original state:
If you wish to restore the CABLE channel
control in TV mode, repeat the above steps by
pressing [CBL] in STEP4.
G. Programming Volume Control.
By following the steps below, the you can
program the volume controls (Volume UP,
Volume Down and MUTE) from one device
to operate in another device mode. The
default volume control settings on the
remote control is as follows:
CBL : TV T V : TV
VCR : TV AUX : AUX
If you wish to store the CBL volume control
in CBL mode, use the following steps.
STEP1 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP2 Release the buttons when the
[CBL] device LED is blinking (the
[CBL] device LED will then remain
lit).
*Tip : The device LED will stay lit for 20
seconds. The next step must be
entered while the LED is on.
STEP3 Press the [VOL+] button.
STEP4 Press the [CBL] button. The device
LED will blink twice to confirm the
programming.
To return to original state:
If you wish to restore the TV volume control in
CBL mode, repeat the above steps by
pressing [TV] in STEP4.
UR4-EXP-CHD2
OCE-0005H(60*216) _REV02 2004.3.16 2:21 PM ˘ ` 1

Remote
Converter Code No
CABLE TV
Set-up Code Tables
6
Scientific Atlanta Explorer Series 001
Motorola DCT Series, CFT2200 002
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
HITACHI 163 004 007 009 011 072 010 012 023 075 143 158
INFINITY 164
INKEL 129
INTEQ 073
JBL 164
JCB 001
JCPENNEY 004 006 008 024 030 065 101 143 156 160
JENSEN 013
JVC 038 001 034 083 206
KENWOOD 006 001
KLOSS 002 059
KTV 006 043 143 154
LG 004 106 119 110 112 113 127 143
LODGENET 072
LOEWE 207 164
LOGIK 072
LUXMAN 004
LXI 007 015 052 081 160 164
MAGNAVOX 006 003 004 022 059 060 061 063 064 127 164 094
160 028
MAJESTIC 072
MARANTZ 164 006
MATSUI 164
MATSUSHITA 080
MEGATRON 004
MEMOREX 004 007 072 028 096
METZ 088
MGA 024 006 004 042
MIDLAND 073
MINERVA 088
MINUTZ 008
MITSUBISHI 109 024 042 004 040 146 028 081 225
MOTOROLA 081
MTC 006 004 062 101
MULTITECH 043
NAD 015 025
NEC 006 134 040 056 007 019 024 237
NIKEI 043
NIKKO 103
NTC 103
ONKING 043
ONWA 043
OPTIMUS 080
OPTONICA 019 081
ORION 096 201 202 203 204 205 028
PANASONIC 034 056 080 164 208 222
PHILCO 006 003 004 024 056 059 060 063 064 127 143 164
PHILIPS 164 005 038 093 127 006 003 004 059 210
PIONEER 023 025 135 176 004 018 006 209 234
PORTLAND 004 143 103
PRISM 034
PROSCAN 144 160 161
PROTON 004 058 143 171 173 112
QUASAR 034 056
RADIO SHACK 004 019 127 143 043
RCA 160 161 144 156 065 006 004 023 024 056 074 152
081
REALISTIC 007 019
RUNCO 072 073
SAMPO 006 004 058 242
SAMSUNG 004 101 127 133 143 160 089 105 211 228 229
SANSEI 120
SANSUI 096
SANYO 007 053 057 082 020
SCOTCH 004
SCOTT 004 005 028 043 048 143
SEARS 004 007 015 028 030 057 082 094 143 160 052 164
SEMIVOX 043
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
DVD(VCR)
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
AUDIO(AUX)
ADMIRAL 072 081 160 161 096
ADVENT 247
AIKO 103
AKAI 006 146 248
ALARON 028
AMARK 112 143
AMERICA ACTION 043
AMPRO 073
ANAM 043 054 055 056 080 112
AOC 058 006 004 112
APEX DIGITAL 015 226
AUDIOVOX 076 103 043
BAYSONIC 043
BELL&HOWELL 072
BRADFORD 043
BROKSONIC 096
CANDLE 006 002 003 004
CAPEHART 058
CARVER 164
CELEBRITY 001
CETRONIC 043
CINERAL 103 120
CITIZEN 006 002 003 004 101 103 143
CLASSIC 043
CONCERTO 004
CONTEC 043 051
CORONADO 143
CRAIG 043 054 028
CROSLEY 164
CROWN 043 143
CURTIS MATHES 006 004 101 143 011 072 081 120 164
CXC 043
DAEWOO 076 103 055 004 127 143 016 043 044 125 120
DAYTRON 004 143
DENON 011
DUMONT 004 073
DWIN 161
DYNASTY 043
DYNATECH 062
ELECTROBAND 001
ELECTROHOME 024 076 143
EMERSON 005 028 043 048 076 096 155 004 051 143 151 153
154
FISHER 007 057
FUJITSU 164 028 198 246
FUNAI 028 043 052 249
FUTURETECH 043
GATEWAY 242
GE 006 073 144 160 161 004 008 009 034 056 074 091
155 081 120
GIBRALTER 004 073
GOLDSTAR 004 106 119 110 112 113 127 143
GRUNPY 028 043
HALL MARK 004
HARLEY DAVIDSON 028
HARMAN KARDON 164
HARVARD 043
SEMP 015
SHARP 081 014 019 028 004 022 143 175
SIGNATURE 072
SONY 001 126 139
SOUNDESIGN 003 004 028 043
SPECTRICON 112
SQUAREVIEW 052
SSS 004 043
STARLITE 043
SUPRE MACY 002
SUPREME 001
SYLVANIA 006 003 059 060 063 064 127 160 164 044 249
SYMPHONIC 052 249
TANDY 081
TATUNG 056 062
TECHNICS 034 080
TECHNOL ACE 028
TECHWOOD 004
TEKNIKA 002 003 004 024 028 043 072 101 143 103 164
TELERENT 072
TERA 172
TMK 004
TNCI 073
TOSHIBA 015 030 007 040 062 101
TOTEVISION 143
UNIVERSAL 008 009
VIDEO CONCEPTS 146
VIDIKRON 174 188 164
VIDTECH 004
WARDS 004 064 164 008 009 019 028 060 061 063 072
074 143
WESTING HOUSE 076
YAMAHA 004 006
YORK 004
YUPITERU 043
ZENITH 072 073 095 103 011 096
ZONDA 112
ADMIRAL 025 053
AIKO 117
AIWA 034 161 101
AKAI 043 046 124 146
AMERICA ACTION 117
AMERICAN HIGH 031
AMPRO 072
ANAM 031 103
ASHA 040
AUDIO DYNAMICS 012 023 043
AUDIOVOX 101
BEAUMARK 040
BROKSONIC 035 037 129 025
CALIX 101
CANON 028 031
CAPEHART 108
CCE 024 117
CINERAL 117
CITIZEN 101 117
COLT 024
CRAIG 003 040 135 024 101
CUIRTIS MATHES 031 041
CYBERNEX 040
DAEWOO 005 108 111 117 017 065 007 010
DAYTRON 108
DBX 012 023 043
DYNATECH 034 053
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
VCR & TV/VCR
CASIO 204
CHIRO 140
CINEMA SOUND 084 134
CITATION 148
CLARION 026
CURTIS MATHES 204
DENON 084 151 155 188 056 119
ENLIGHTENED AUDIO 049 050
FISHER 151
FOSGATE AUDIONICS
062 148
GOLDSTAR 072 006
HARMAN KARDON 153 148 162 060 066 115
HITACHI 020
INKEL 005
JCPENNEY 102 204
JENSEN 058
JVC 013 163 176
KENWOOD 005 026 057 166 095
KOSS 102
KRELL 150
KYOCERA 200
LEXICON 120 167 171 172
LG 072 006
LUXMAN 035 137 139 165 004 029
LXI 204
MAGNAVOX 152 164 191 043
MARANTZ 028 048 063 191 090
MCINTOSH 173
MCS 204
MERIDIAN 009 051
MITSUBISHI 180
MONDIAL 022 023 042 073 075
NAD 048
NAKAMICHI 111 182 183 079 087
NEC 080
ONKYO 084 046 012 030 041 081 103 044
OPTIMUS 017 036 138 026
PANASONIC 007 088 129 130 132 195
PARASOUND 129 130 132
PHILIPS 063 188 189 191
PIONEER 084 039 045 054 069 078 168 128 158
PROCEED 144
QUASAR 007 088 129 130 132 195
RCA 010 067 117 156
REALISTIC 019 034 037 047
ROTEL 074 083 085
SAMSUNG 123
SANSUI 063 110 032 116
SANYO 151
SCOTT 019
SEARS 204
SHARP 026 057 094 175
SHERWOOD 024 038
SONY 001 011 055 187 053 112 018
SOUNDESIGN 036
SSI 068
TEAC 019 059 111 109
TECHNICS 076 088 122 193 080 098
THETA DIGITAL 065
TOSHIBA 033 112
YAMAHA 021 026 031 067 192 002 101 118
ZENITH 143 106
DMX-DJ 254
MAESTRO II 255
H. Programming For Advanced
Functions
The A, B and C buttons can be re-programmed
for the “Motorola DCT” series converter only.
To act as Macro button’s to send out up to 10
commands with the press of one button.
STEP1 Press the [CBL] button to select the
CBL mode.
STEP2 Press the [A, B, or C] button and
[SELECT] button simultaneously for
3 seconds. The [CBL] device LED
will turn on for 20 seconds.
STEP3 Press up to 10 buttons you wish to
store. The [CBL] device LED will
blink once for each command
entered.
STEP4 Press the [CH+] button to store the
functions that were selected. The
[CBL] device LED will blink twice to
confirm the storage of functions.
I. Low Battery Warning.
When the batteries are low and need to be
replaced with fresh batteries, the remote
control LED will blink 2 times in sequence
whenever a [POWER] button is pressed.
J. Memory Lock System.
This remote control is designed to retain
programmed memory for 10 years even
after batteries are removed from the remote
control.
K. Write your device Set-up codes.
TV Set-up Code Number :
VCR Set-up Code Number :
AUX Set-up Code Number :
AIWA 202
ALPINE 221
APEX DIGITAL 251 246
ARCAM 215
CYBERHOME 220
DAEWOO 220
DENON 226 241
FUNAI 208
GE 230 231
GOLDSTAR 235 239
GO VIDEO 201
HARMAN KARDON 243
HITACHI 223
HITEKER 246
JVC 238
KENWODD 216
KLH 210
LG 235 239
MAGNAVOX 254 237
MARANTZ 253 242
MCINTOSH 217
MEMOREX 207
MITSUBISHI 227
MYRYAD 224
NAD 247 239
NAKAMICHI 225
ONKYO 240
OPTIMUS 229
PANASONIC 228 206 226
PHILIPS 253 237 214 242
PIONEER 255 222 229
PROCEED 245
PROSCAN 230 231
RCA 230 231
SAMSUNG 236 248 201
SANSUI 205
SANYO 204
SHARP 252
SONY 232 218 203
SYLVANIA 208
SYMPHONIC 208
TATUNG 224
TECHNICS 228
THETA DIGITAL 229
TOSHIBA 233 244 219 205
VENTURER 209
YAMAHA 249 226
ZENITH 239 226 235 239
ADC 200
ADCOM 072 082 092 161
AIWA 025 071 104 114 170 171 091 100
AKAI 139 093
AMC 125 126 127 128
ANGSTROM 142
ARCAM 141
AUDIO ACCESS 147
AUDIO ALCHEMY 135
AUDIO FILE 203
AUDIO MATRIX 077
AUDIO TECHNICA 134
B & K 096 097
BOSE 070 170 113
BRYSTON 015
CARVER 003 008 028 099 151 203 014 016 040 090
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
DMX & DCR(AUX)
RANDEX 101
RCA 107 109 144 041 031 004 020 034 040 140 147 158
053
REALISTIC 003 008 014 031 034 040 053 054 101 010
RICO 058
RUNCO 072
SALORA 014
SAMSUNG 040 017 107 109 113 115 124 122
SANKY 053
SANSUI 043 135 048 025 034
SANYO 003 014 040 134
SCOTT 017 037 129 131
SEARS 003 004 008 014 017 081 101 010 031 034
SHARP 053 031 054 159
SHINTOM 024
SHOGUN 040
SINGER 024
SONY 001 057 058 003 052 053 031 154 171 009 034
SOUNDESIGN 034
STS 004
SYLVANIA 031 034 059 067
SYMPHONIC 034
TANDY 034 010
TATUNG 043
TEAC 034 043
TECHNICS 031 070
TEKNIKA 031 034 101
THOMAS 034
TMK 006 040
TOSHIBA 017 131 004 008 059 082 150
TOTEVISION 040 101
UNITECH 040
VECTOR RESEARCH 012
VIDEO CONCEPTS 012 034 046
VIDEOSONIC 040
WARDS 003 004 017 024 031 034 040 053 054 131
WESTINGHOUSE 024 025
XR-1000 024 031 034
YAMAHA 012 034 043
ZENITH 072 034 001 058 080 101 153 048 025
*Note : For TV/VCR combination unit,
Please use following steps to operate
the volume control.
STEP1 Press the [SELECT] button and
[MUTE] button simultaneously for 3
seconds. The device LED's blink in
sequence (TV-VCR-AUX-CBL-TV)
STEP2 Release the buttons when the
[CBL] device LED is blinking (the
[CBL] device LED will then remain
lit).
STEP3 Press the [VOL+] button.
STEP4 Press the [VCR] button. The device
LED will blink twice to confirm the
programming.
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
AUDIO(AUX)
ELECTROHOME 059 101
ELECTROPHONIC 101
EMERSON 006 029 035 037 129 153 017 025 027 031 034 036
046 101 131 138 117
FISHER 003 010 008 009
FUJI 031
FUNAI 034
GARRARD 034
GE 031 072 144 147 063 107 109 040 053
GO VIDEO 132 155 040 136
GOLDSTAR 101 004 012 020
HARLEY DAVIDSON 034
HARMAN KARDON 012 045
HARWOOD 024
HITACHI 004 026 034 043 063 137 150
HQ 034
HUGHES 004
INSTANTREPLAY 031
JCL 031
JCPENNEY 004 012 031 040 101
JENSEN 043
JVC 048 043 055 060 130 150 152 012 031
KEC 101 117
KENWOOD 034 150 014 048
KLH 024
KODAK 031 101
LG 101 004 012 020
LLOYD 034
LOGIK 024
LXI 003 009 017 034 101 004 106
MAGIN 040
MAGNASONIC 117
MAGNAVOX 067 031 034 068 041 156 170
MARANTZ 067 069 012 031
MARTA 101
MATSUI 027 030
MATSUSHITA 031
MEI 031
MEMOREX 040 101 003 014 031 034 053 072 134 139 025
MGA 045 046 059
MGN TECHNOLOGY 040
MINOLTA 004 020
MITSUBISHI 059 061 051 004 046 020 045 053
MOTOROLA 031 053
MTC 034 040
MULTITECH 024 034
NEC 012 023 043 048
NIKKO 101
NOBLEX 040
NORDMENDE 043
OLYMPUS 031
OPTIMUS 053 101
OPTONICA 053 054
ORION 025
PANASONIC 031 070 133 140 163
PENTAX 004 031 063 020
PHILCO 031 034 067 025
PHILIPS 031 034 054 067 101 150
PILOT 101
PIONEER 021 004 048
PORTLAND 108
PROFITRONIC 040
PROTEC 024
PULSAR 072
QUARTZ 014
QUASAR 031 070 133 140 163 014
RADIO SHACK 123 034
RADIX 101
OCE-0005H(60*216) _REV02 2004.3.16 2:21 PM ˘ ` 2