chatpod 350 User manual

IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland, 180620
1h
chatpod 350
ASSEMBLY
INSTRUCTIONS
chatpod 350

2chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
Scope of delivery
left side
right side
1xA
1xG
1xH
1xI
2xJ
1xC
1xD
1xE
1xF
1xB

3chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
Scope of delivery
1xK
2xL
10xN
1xO
4xP
5xQ
M6 x 40mm
20xS
M6 x 75mm
6xR
M6 x 12mm
4xT
7 x 30mm
8xU
V
2xM

4chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
What you’ll need in addition
How the parts come together
2x3x 1x 4mm 2x 3mm 1x 2.5mm 1x 13mm 1x
A
B
G
C
D
E
F
H
I
J
K
L
L
M
M

5chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
Assembly instructions
step 1
Place the honeycomb cardboard blocks (P) on the floor. Insert the power cord (V) and
the cables from the sides (A) and (B).
click click
click
P
P
P
P
G
A B
V

6chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 2
Place the bottom plate (G) on the honeycomb cardboard blocks (P) and make sure
that they extend sideways. Press the sides (A) and (B) into the bottom. Sides (A) and
(B) must be held so that they do not fall over. The power cord (V) can be guided away
under the right (B) or left side (A).
P P
G
AB

7chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 3
Remove the upper part of the top (H) and press the lower part into the sides.
Make sure that the cable, which protrudes at the top of side (B), is guided through the
cut-out in the top.
A
B
H

8chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 4
Insert the connecting rods (N) into the elements until they are approximately flush.
N
N
N
N
N
N
N
N
N
N

9chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 5
Join the rear wall on the right (C) and rear wall on the left (D). Press the connectors
(Q) into the holes and tighten them with the 4 mm Allen key.
C
D
Q
Q
Q

10 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 6
Join the rear wall (C) and (D) with the two sides (A) and (B), the bottom (G) and the
top (H). Make sure that you mount the back panel on the rear side. Screw in the black
screws (S) a few turns to secure the back panel.
C
D
S
S
S
S
S
S
S
S
S
S
A

11 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 7
Join the front (E) and (F). Press the connectors (Q) into the holes and tighten them
with the 4 mm Allen key.
E
F
Q
Q

12 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 8
Join the front (E) and (F) with the two sides (A) and (B), the bottom (G) and the top
(H).Turn the black screws (S) a few turns to secure the front. In a second step tighten
the screws (S) firmly by countering the screws on the backside.
E
F
B
S
S
S
S
S
S
S
S
S
S

13 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
A
A
B
B
C
C
D
E
D
E
step 9
Guide the cable which is coming from the side into the cut-out provided and insert it
until it clicks.
Note: Only the power cable has to
be plugged in the other cables are
already plugged in.
motionsensor
light
light
fan
power in
click

14 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 10
Put the upper part of the top on the chatpod.

15 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
1.
1.
1.
1.
1.
2.
2.
3.
step 11
Check with a spirit level whether the chatpod is level. If not, turn the adjustable feet
with the open-ended spanner until it is the case. Plug in the cable. Remove the honey-
comb cardboard blocks (P) and recycle them.
P
P

16 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 12
Fix the two panels (J) in the recess with the Velcro fastener.
J
J

17 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
1.
2.
step 13
Loosen the four screws. Align the bench (M) with the screw holes and tighten it with
the screws (R) (side) and screws (U) (bottom). Align the table (L) with the screw holes
and fix it with the previously loosened screws. Repeat the same steps on the opposite
side.
L
M
RRR
UU

18 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 14
Screw the whiteboard (K) to the rear wall with the screws (T).
K
T
T
T
T

19 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
step 15
Attach the glass door (I) and secure it with the two pins. Make sure that the notch
at the pin is on the bottom. Tighten the two small setscrews with the 2.5 mm Allen
wrench.
I

20 chatpod 350 IMPACT ACOUSTIC AG, Bodenhof 4, 6014 Lucerne, Switzerland chatpod
Step 16
Mount the door handle (O) in the following order: lock, metal ring, plastic ring, door han-
dle. Press the two door handles together while tightening the set screw with the 3 mm
Allen wrench.
Well done!
O
O