Flexispot S05P User manual

Item No. S05P/S05U/S05G
Installation Guide
Website: www.flexispot.com
Tel: [phone]

01 02
Main Parts
Screw tools
Step 1
Attach the arms, one on each side, to the bottom of the seat cushion by tightening the screws
into the holes on the seat plate (as shown in the picture).
Actual parts and sizes may vary;
Additional screws are available for each type of screw;
Unit: PCS/piece
x1 x1 x1
x1x1x1
x2 x1 x7

Step 2 Step 3
First, attach the backrest (B) to the support frame (C) and secure it with one (E) screw and 2
(F) screws, then open the buckle on the chair cushion (A) and insert the support frame into
the hole on the cushion. Lock the buckle (as shown in the figure).
Assemble the upper half of the chair to the chassis and lock it with 1 (H) screw (as shown in
the picture).
0304

Function graphic Use and Maintenance
0506
Seat Height
Use the lever below
the seat to raise or
lower the seat to
your ideal height.
Backrest Tilt
Turn the knob to
adjust the backrest
to the desired
position.
1. Keep chair away from direct sunlight to prevent degrading of fabric over time.
2. Do not use detergent with harsh chemicals to clean your office chair. Avoid contact with
acid, alkali or other corrosive liquids.
3. To prevent water stains or water damage, keep chair dry – do not saturate with water.
4.Do not stand on chair or use chair as a stool for climbing.
5.Keep away from open heat sources including open fire and burners.
6.Do not paint the surface or use sharp objects to prevent damage to the fabric on the seat
cushion and backrest.
7.Inspect and tighten all fasteners on the chair as needed including any screws and bolts that
may loosen over time.
Moving and storing
1.Always take care when moving the office chair. Do not drag or push harshly, especially over
rough or uneven flooring, to prevent loosening of fasteners and damage to casters and legs.
2.Protect your chair by wrapping it properly in a moving pad. Handle with care while wrapping,
moving and installing in the new location. Adjust fasteners as needed before using the chair in
the new location.
3.To store your office chair for an extended period, first protect the fabric using a dust-proof
cover, then store it indoors (away from direct sunlight) in a dry, well-ventilated environment.
Special instructions
The instructions in this manual are for informational purposes only. The product it describes
is subject to change without prior noticedue to the manufacturer’s ongoing product
development. For the latest information on this product, visit our website or call us directly.