Chester Creek BigBlu VisionBoard User manual

User's Manual
BigBlu VisionBoard / BigBlu KinderBoard
To use this device properly, please read this manual before installation.

Installing batteries in the keyboard:
The BigBlu VisionBoard / BigBlu KinderBoard use two AAA size batteries.
For best performance, use alkaline batteries.
1. Remove the two phillips-head retaining screws and set aside.
2. Remove the battery compartment cover by sliding it in the direction
indicated by the arrow.
3. Insert two new AAA sized batteries. Correct battery placement is
indicated in the battery compartment.
4. After the batteries are installed, carefully replace the battery cover and
secure in place with the two screws.
Low battery alert:
When the indicator light next to the space bar begins to flash, it is time to
replace the keyboard's batteries.

Pair the Bluetooth Keyboard:
1. Turn the power on. The power switch is located underneath the keyboard.
The Blue LED light next to the Space Bar will blink once when you switch
on the keyboard.
2. Press the pair button located next to the power switch to put the keyboard
into “pairing status”. The Blue LED light will blink until the keyboard is
paired. If pairing is unsuccessful, the Blue LED light will go out after 2
minutes, press the pairing button again to return to “pairing status”.
3. Turn on the Bluetooth service on your iPad, iPhone, Notebook, or other
Bluetooth enabled device (refer to your device user manual). After your
device discovers “ENXKB3023BT”, it will ask you to key-in an authorization
code, the code will be shown on screen. Enter the code using your
Chester Creek Bluetooth keyboard.
4. The Blue LED light will stop blinking after completing the pairing procedure.
5. Your Chester Creek Bluetooth Keyboard is now ready to use.
Pairing with another device:
Disconnect from the current Bluetooth device (refer to your device user
manual).
To connect to another iPad/iPhone/Notebook , follow the instructions
above.
Adjusting the angle of your keyboard:
There are two feet on the bottom of the keyboard that can be flipped up or
down to give you the most comfortable position for keyboard use.
Power Switch
Pair Button
Power Switch detail

System requirements:
PC running Windows 2000/XP/VISTA/7/8
Will operate on an Apple computer running OS 10 or newer
Bluetooth:
Bluetooth 3.0+EDR compliant
Bluetooth compatible with V3.0, V2.1, V2.0, V1.2, V1.1 standard
Operation scope ＜10 meters
Bluetooth profile support : HSP,HFP, A2DP
Frequency range: 2.401-2.408 GHz (2.4GHz ISM segment)
Power consumption: working : 5mA , standby : 0.03mA
Additional information:
1. Operational distance can be affected by the work environment.
2. Typical usage will provide you with 60 –90 days of battery life. The
batteries will have a longer or shorter life depending on your keyboard use.
3. If the keyboard stops functioning, replace the batteries.
4. Dispose of batteries properly.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference and (2) This device must accept any interference
received including interference that may cause undesired operation.
Chester Creek Technologies, Inc.
Arrowhead Place
205 West 2nd Street, Suite 130
Duluth, MN 55802
218-722-1837
www.chestercreek.com