Chexx Automations K-300plus User manual

1
K-300plus K-650 K-400 Watch User Manual
Setting key, confirm key, choose bit key
Increase or decrease number; check up and down history call
Exit setting; cancel key (can cancel call number from screen)
Long press this key turns on or off watch pager
1-13 Add caller
1. Long press key for 3 seconds watch will display “add caller ”
2. Press key again , it will display “add 0001 ID”
3. Press “ ” key and “ ” key to select the number you want. “ ” keys for
navigating up and down. “ ” key for selecting .
4. Press any key on the transmitter till you hear a “beep”sound and “done”
displayed on the receiver screen, then the number will move to the next one. For
example, if you select “0001”, and press call key from transmitter button, after
saving successfully the receiver will have a “beep”sound and “done”will be
displayed on the screen. Then it will display 0002.
5. When done, press “ ” to exit the programming state.
2-13 Delete caller
1. Long press “ ” to display “add caller ”
2. Press “ ” key to select “delete caller”
3. Press “ ” to confirm. It will display “delete single”and “delete all”
4. Press “ ” to select delete single or delete all
5. If you select “delete single”, press “ ” to confirm, screen will display 0000. You can
select the number you want to delete and long press “ ” till screen displays removed.
This means you have deleted this number.
6. If you select “delete all”, long press “ ” till screen displays removing all and
removed .This means you have delete all the transmitter buttons.
7. When dons, press “ ” to exit the programming state.
3-13 Key function
Area Set: Sets different zone from 0-9 and A-Z when paired with the service type
Type Set: Modifies the Service type
1. Long press “”to display “add caller ”
2. Press “”key to select “key function ”and press to confirm
3. It will display “Area 0” , press press to confirm. “set 0’s key “ will be displayed
4. Press to confirm , it will display call (navigate using“ ” to see different key
options)
5. Select the option you want
6. Press to eixt , and watch will display “set 0’s key “ and “copy 0 to all” .Then
press to select “copy 0 to all “ and press to confirm. Watch will display
“copying”.
7. press several times to exit.

2
4-13 Work mode.
1. Long press “ ” key for 3 seconds to display “add caller ”
2. Press “ ” key to select “work mode ”
3. Press “ ” to confirm, screen displays “single key”and “multi-key”
4. Select the one you want and Press “ ” to confirm.
5. When done, press “ ” to exit the programming mode.
5-13 Display Mode
1. Long press “ ” key for 3 seconds to display “add caller ”
2. Press “ ” key to select “display mode ”
3. Press “ ” to confirm, screen displays “live view”“queue view”
4. Select the one you want then press “ ” to confirm. “live view”means, when
No.1 No.2 No.3 are called in turn, screen displays 0003 0002 0001. Latest call
number displays on the top of screen. “queue view”means, when No.1 No.2 No.3
are called in turn, screen displays 0001 0002 0003. Earliest call number displays
on the top of the screen.
5. When done, press “ ” to exit the programming mode.
6-13 Prompt mode
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “prompt mode ”
3. Press “ ” to confirm, screen displays “light” ” vibration” ” sound”
4. Select the prompt mode you want and Press “ ” to confirm
6. When done, press “ ” to exit the programming mode.
7-13 Prompt timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “prompt timing”. You can choose from 01-99 seconds.
00 means prompt all the time without stopping until the watch is turned off
3. Choose the time you want, and press “ ” to confirm.
4. When done, press “ ” to exit the programming mode.
8-13 Remove timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “remove timing”
3. Press “ ” to confirm. You can choose from 00-99. 00 means cycle mode, all number
will display on the screen until canceled. For 01-99 it means, the time delay until the
number disappear automatically.
4. Choose the number you want. Press “Press “ ” key to confirm
5. When done, press “ ” to exit the programming mode.
9-13 Cycle timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “cycle timing”
3. Press “ ” to confirm, You can choose from 00-99. For example, if you choose 10
seconds. It means for each 10 seconds, the numbers will cycle one time.
4. Choose the number you want. Press “Press “ ” key to confirm
5. When done, press “ ” to exit the programming mode.
10-13 Date &Time
1. Long press “ ” key for 3seconds to display “add caller”
2. Press “ ” key to select “date & time”
3. Press “ ” to confirm. You will see current time (hours; minutes; seconds and
DD/MM/YY). Use “ ” keys to navigate. Use “ ” key to move from hours to
minutes to seconds and to days to month to year.
4. Press “ ” to exit the programming mode.

3
11-13 Keyboard set
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “Keyboard set ”
3. Press “ ” to confirm. you will see OFF ALL/ON ALL/00/01/02/03/04/05/06/07/08/09,
If you want watch work with 1st zone keypad, you will select 01 . Press “ ” to confirm.
4. press “ ” to exit the programming. If you press 5 from keypad. Watch will
display 1005 . if in step 3 you chose 02 , the watch will display 2005 .
12-13 Language
CN
EN
13-13 factory reset
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “factory reset”
3. Press “ ” to confirm, screen will display confirm reset? yes/no
4. Select Yes and Long Press “ ” to confirm till screen displays factory resetting.
5. When done, press “ ” to exit the programming.