Childcare Matisse 4in1 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Matisse 4in1
Travel Cot “Chevron Navy”
Model # 074230-352

2
Use only accessories as recommended by the supplier.
Ensure the top rails and base are fully locked.
Failure to follow warnings and instructions could result in serious injury or death.
DO NOT use your folding cot if any parts are torn,missing or broken.
Contact the manufacturer for replacement parts or instructions if they are required.Never use substitute parts.
Keep children away while assembling/disassembling the cot.
DO NOT leave anything on the folding cot (such as toys) that provide a foothold.
DO NOT use the folding cot near naked heat sources,bar heaters,open res or exposed ames.
Keep the folding cot clear of trailing cables and hanging cords.
Keep medication and small items that a child could choke on,away from the cot.
DO NOT use the folding cot if fabric or padding on the side rails or end rails has been bitten through.
FALL HAZARD – To prevent falls,DO NOT use the folding cot once the infant has reached the manufacturer’s maximum
weight of 13kgs or a height of 85cm tall.
SUFFOCATION HAZARD – Infants can suffocate;
- In gaps between an extra pad or mattress.
- In soft bedding.
NEVER leave your child unattended.
Use this product with only one child at a time.
To reduce the risk of Sudden Infant Death Syndrome (SIDS),pediatricians recommend healthy infants be placed on their
backs to sleep,unless otherwise advised by your physician.
Read all instructions before assembly and use of the travel cot. Keep
instructions for future use.
BEFORE ASSEMBLING THIS COT,READ AND UNDERSTANDTHE INSTRUCTIONS.
DO NOT USE MATTRESS OTHER THAN THE ONE SUPPLIED BY THE MANUFACTURER.
INCORRECT MATTRESS CAN CAUSE DEATH.
USE ONLY ACCESSORIES AS RECOMMENDED BY THE MANUFACTURER.
ENSURE THE TOP RAILS AND BASE ARE FULLY LOCKED.
STOP USING THIS COT IF ANY PART OFTHE COT IS BROKEN,TORN OR MISSING.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
SAFETY PRECAUTIONS
WARNING

3
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic,therefore product fabrics,colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Matisse 4in1 Travel Cot
Congratulations on your purchase of the Matisse 4in1
Travel Cot.
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS

4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
InAustralia,contact CNP Brands on 1300 667 137,in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Travel cot Carry bagx 1 x 1
x 1
x 1 x 1
x 1Mattress pad
Bassinet
Changer
Toy bar & toys
There are no accessories recommended for use with this Childcare Matisse 4in1 Travel Cot.
x 2
Bassinet tubes
(at end) x 2
Bassinet tubes
(tapered end)

5
ASSEMBLY / OPERATING INSTRUCTIONS
To set up Travel Cot...
1
2
3
4
5
Unzip bag.Remove travel cot and stand unit upright.
Unhook velcro tabs.
Remove mattress pad.
Separate tops of corner posts.Ensure centre support is
set to the highest position.
Grasp centre of each side and end rail,lift to‘snap’into
correct position.
If‘snapping’of the side and end rail locks does not
occur easily, recheck that the centre hub is raised to
recommended height before proceeding.
Press down on centre hub to lock it into position.
Check and ensure all the locking devices are fully
engaged.
If not,lift the centre support and repeat steps 3a and
3b.
Lay mattress pad on the base of the travel cot,soft
side up.
Check the assembly of the travel cot is correct and
safe.
The travel cot is now ready for use.
1a.
1b.
1c.
2a.
3a.
3b.
4a.
4b.
4c.
5a.
5b.
5c.
IMPORTANT! Before pushing down centre hub into locked position,
check that the support legs are positioned at on the oor to
successfully lock down the centre hub.
IMPORTANT! Check to ensure the travel cot frame is secure.

6
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Bassinet...
1
2
3
4
5
Remove the mattress pad by unfastening the velcro
fasteners underneath the cot base and removing the
pad.
Place bassinet on a at surface with the sleeves facing
up.
First,insert the closed ends of all four of the support
tubes into the sleeves of the bassinet.
Next,t the bassinet support tubes with the tapered
ends into the bassinet support tubes with the open
ends.
Fasten the additional four velcro straps for extra
security.
With the bassinet support tubes facing down,t 4
bassinet end clips over the travel cot short end rail.
Push the bassinet into the corners to ensure the velcro
is fastened to the sides.
Repeat step 6 to attach the remaining bassinet side
clips.
Place the mattress pad into the bassinet.
1a.
2a.
2b.
2c.
2d.
3a.
3b.
4a.
5a.

7
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Bassinet (continued)...
To assemble Changer...
6
1
2
Push down on the mattress pad to attach all the
fasteners.
Ensure the velcro is rmly into position.
Open the changer and place on a at surface.
Assemble change table tubes ensuring the locking
button is pushed down and tubes click into place.
Your changer can be installed on either end of your
travel cot by simply sliding the slotted clips over the
fabric upper frame tube at one end of the travel cot.
Then clip the four base clips downwards on boh sides
of the travel cot.
6a.
6b.
1a.
1b.
2a.
2b.
THIS BASSINET SHOULD BE REMOVED BEFORETHE CHILD CAN SIT UP.
USE ONLY THE MATTRESS SUPPLIED BY THE MANUFACTURER.
INCORRECT MATTRESS CAN CAUSE DEATH.
NEVER PLACE A CHILD IN THE COT WHEN THE BASSINET IS IN PLACE.
WARNING

8
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Changer (continued)...
5
6
7
8
Clip on remaining hooks on the sides of the cot as per
image.
Before use,make sure that the travel cot and changer
are both tightly secured.
After placing your child in the changer, position the
waist belt around your child’s waist.
Fasten the waist belt.
Make sure you hear a‘click’.
Check to be sure the waist belt is securely attached by
pulling it away from your child.
The waist belt should remain attached.
Tighten the waist belt so it is snug against your child.
To tighten the waist belt,feed the anchored end of the
waist belt up through the buckle to form a loop.
Pull the free end of the waist belt.
5a.
6a.
7a.
7b.
7c.
7d.
7e.
8a.
8b.
8c.
9To loosen the waist belt,feed the free end of the belt
up through the buckle to form a loop.
Enlarge the loop by pulling on the end of the loop
towards the buckle.
Pull the anchored end of the waist belt to shorten the
free end of the waist belt.
9a.
9b.
9c.

9
To assemble Toy Bar...
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Changer (continued)...
10
1
2
When the changer is not in use the changer can
be ipped over to rest against the side of the cot,as
shown in image.
Place the bar into position on the sides where
needed.
Push down gently until the clips are rmly in place
and secure.
The clips should be rmly in place on both sides of
cot.
10a.
1a.
1b.
2a.
NEVER LEAVE CHILD UNATTENDED.
NEVER PLACE A CHILD INTHE COT WHEN THE CHANGETABLE IS IN PLACE.
ALWAYS USETHE HARNESS WHEN USING THE CHANGETABLE.
WARNING

10
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Toy Bar (continued)...
4
5
Add the toys to the desired positioning on the toy bar
by undoing the velcro straps to feed through the loops.
Secure the velcro straps.Your toy bar is now complete.
4a.
5a.
To fold Travel Cot...
1Unfasten the velcro fasteners underneath the cot base
and remove mattress pad.
1a.
2Locate the centre hub inside the travel cot.Twist and
lift the handle to release the centre hub lock.Lift centre
hub, making sure it is raised to highest position.
2a.

11
ASSEMBLY / OPERATING INSTRUCTIONS
3
4
5
Lift latch.
Squeeze button in the centre of the side rail
Gently push rail down.
Repeat to release latches on remaining three rail
centres.
3a.
4a.
5a.
5b.
6
7
Push all sides of travel cot in towards centre hub.
Lay mattress pad on oor,soft side up,and lay travel
cot on mattress pad.
Wrap mattress pad around travel cot and fasten the
velcro tabs.
Place travel cot into bag and zip together.
The travel cot is now ready for easy carrying or
storage.
6a.
6b
7a.
7b.
7c.
To fold Travel Cot (continued)...
PLEASE NOTE! Latches will not release unless you lift up rail centre
and squeeze the button at the same time.

12
HOW TO CARE FOR YOUR CHILDCARE TRAVEL COT
Cleaning
Maintenance
This product has been designed and developed with safety,comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required.To maintain the safety of your
travel cot, seek prompt repairs for bent, torn, worn or broken parts.
Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the travel cot,please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.

13
ABOUT US
About CNP Brands
Currently,CNP Brands boasts one of the most diverse brand portfolios
with a combination of company owned brands and distribution
agreements.These include distribution lines for 4moms,Brica,Cybex,
Eveno, Good Baby, Lascal, Maclaren, Motorola, Munchkin, OiOi
and Summer Infant.
Our own brands, including Childcare, have gone from strength to
strength in recent years. Childcare, and our premium brand bebe
care, demonstrate our commitment to quality and continuing
investment in product development.

Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz