Childcare 044282-351 User manual

VUE HIGH CHAIR
Model # 044282-351
IMPORTANT!
RETAIN FOR FUTURE REFERENCE

3
Safety Precautions
Read all instructions before assembly and use of the high chair. Keep
instructions for future use.
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Check that all safety locks are engaged before placing a child in the high chair.
Always keep child in view while in high chair.
Not recommended for a child under 6 months old.
The tray is not designed to hold the child in the high chair.
Use safety locks and brakes at all times.
Always secure your child in the restraint. Ensure that your child wears a correctly tted and
adjusted harness at all times.
The high chair should only be used in an upright position once the child is capable of reliably
and consistantly sitting upright.
Only use the high cchair on a secure level surface
Do not allow children to stand on the seat or footrest or climb into or out of the high chair.
When adjusting the high chair, make sure that parts of your child’s body are clear of any
moving parts.
Do not carry the high chair with a child in it.
To reduce the risk of injury, position the high chair away from furniture, walls, hot surfaces
and liquids, window covering cords, and electrical cords. Position the high chair away from
furniture when the high chair is not being used at a table with the tray removed.
Periodically check that all parts of the high chair are in good working order.
Advice not to use the high chair if it is not working correctly and that the owner should seek
repair.
Do not use the high chair if it is damaged or broken.
The weight of the child using this high chair should not exceed 17kgs.
Promptly replace worn out or broken parts.
Apply wheel lock/brakes when not moving the high chair.
Use the high chair on a at, even and horizontal oor. Do not elevate the high chair on any
structure or table.
Do not use the high chair unless all components are correctly tted and adjusted.

4
x1
x2
x1
x1
Assembly Contents
Supplied loose in box:
Seat assembly
Leg assemblies (1 x LH & 1 x RH)
Front feet with 2 insert wheels
and Rear feet
One serving tray
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Assembly Contents
5
x1
x2
Footrest
Stop washer and screw

6 7
Assembling the high chair
Take either the left or right leg (2), press and hold down the button (a) and extend the leg then
release the button.
Take the other leg and follow the above procedure. Take the legs and noting the orientation
in the diagram insert the legs into the top of the seat assembly adjusting brackets. To lift the
seat assembly to the top of the legs simply press and hold the buttons on the seat assembly
adjustment brackets and lift. There are six positions to adjust height.
Assembly / Operating Instructions
Fixing the feet
Fitting the footrest
Assembly / Operating Instructions
Turn the high chair upside down. Please note that each of the four legs has a sprung loaded pin.
Line up one of the feet so that the small hole in the top of the foot lines up with the pin. Push rmly
on the foot at either end until each fo the two sprung pins click into place within the small hole in
the foot. Repeat for other foot. Note the rear foot has 2 insert wheels inside. Take one stop washer
and insert the short screw, then insert it into the bottom hole at the rear of the front left leg and
repeat the process on the right leg.
Place the footrest in the appropriate position and x it on both sides of the screw. Then insert xing
buckle.
a

8 9
Fitting the tray
Assembly / Operating Instructions
A ve point harness is provided to
restrain your child. To unfasten push
the button on the buckle (a) and pull
the clips clear.
To fasten the harness push the waist
strap clips into the buckle until they
lock in place (b).
Sliding adjusters are tted on the
shoulder straps and waist straps
(c). The harness should be carefully
adjusted so that it ts your child
comfortably.
To adjust the shoulder strap height
or to remove the harness, atten the
buttery ends and pass through the
slots in the seat.
To ret the straps, atten the
buttery ends, pass the ends through
the slots in the seat then open the
buttery ends
Assembly / Operating Instructions
Using the harness
b
b
c
Position the tray to the front of the arms, full the front lever (b) found on the underside of the tray,
whilst sliding the tray along with the slot (c) to the position required. The tray has three positions
only as indicated on ther arm rests, line the tray with the desired position, release the levers to lock
position. In the case the tray is not automatically locked onto the armrests, move the tray slightly
until a double click is heard signalling the tray is securely locked.
WARNING: Never leave the tray tted in a position in which the warning signs are visible.
The tray maybe stored on the back legs of the high chair. Align the holes in the rear of the tray with
the small the small pegs on the back legs.

1110
Assembly / Operating Instructions
Adjusting the seat height and relineRemoving the seat cushion for cleaning
Folding the high chair
Assembly / Operating Instructions
Note: Do not adjust the height of the seat whilst the child is seated in the chair. To adjust the height
of the seat push in both of the height adjusing locks (a) and simultaneously raise or lower the seat,
releasing both of the locks at the required height. To adjust the angle of the seat, lift the plastic lever
(b) (found on the back of the seat assembly) and position as required, releasing the mechanism to
secure into place.
Important: If the height adjustment becomes difcult after a period of use and as part of the
regular mainenance routine, DO NOT use spray lubricants, simply wipe clean after use.
1. Feed the harness straps throught the slots in seat and seat cushion on the back and under th
seat (a) and remove the harness.
Release the seat cushion on either side of the arm rests by pulling the press studs from the
inner armrests (b).
2. Lift the cover off the seat (c).
Retting the seat cushion is a reversal of this procedure. When retting the harness ensure
the butteries on the ends of the harness straps are opened out correctly (d).
For a more compact fold to t the tray to the back of the high chair. To fold push in both of the
height adjustion locks (a) and simultaneously lower the seat of the high chair to position 6, press in
both of the releasse catches (b) on the side legs and slide the rear legs forward.
Check the high chair is correctly folded in
its locked position before leaving to stand
free.
b
b
a
a

12
How to care for your High Chair
Cleaning
To ensure the long-lasting use of your high chair, wipe down with a damp cloth and use a mild
soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace
if required. To maintain the safety of your high chair seek prompt repairs for bent, torn, worn or
broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the high chair, please contact our Service Department. In
Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution
on 0800 567 5000.
13
About CNP Brands
Currently, CNP Brands boasts on of the most diverse
brand portfolios with a combination of company
owned brands and distribution agreements.
These include distribution lines for 4moms, Brica,
Evenflo, Ferrari, Good Baby, Lascal, Maclaren,
Motorola, Munchkin and OiOi.
Our own brands, including Childcare, have gone
from strength to strength in recent years. Childcare,
and our premium brand bebe care, demonstrate
our commitment to quality and continuing
investment in product development.