chinavasion CVAFZ-B100 User manual
Bomontic Li ghrin g Bluetoolh Speoher
User Manual
Th'ank you for choosing us.
Please read this user manual before using the speaker.
w
Packing
tt
ll
ll.,(uu I I
l...4l
The speaker
list
USB data cable
Specifications
. Name: Romantic Lighting Bluetooth Speaker
. Model No. : L5
. Charging lnput: DC5V-1000mAh
. Battery Capacity:Lithium Battery, 3.7Vl4000mAh
o Charging Time:4-5 Hours
. Speaker Specifications: <D66-35mm(Power: 404W)
. Lamp power: 1.5 W
. Frequency Range: 70Hz-20KHz
o Distortion:<0.5%
o Whole Signal to Noise Ratio: >65dB
o Main Material: ABS/PP , Aluminium alloy
o Size: O88x141mm
o Weight: About 345 G
o Playing time: 22 hours (playing Bluetooth music only)
o Lighting time:8 hours on high brightness. 180 hours on low
brightness
(Note: battery life will be less when speaker and light are
both turned on at the same time).
Button Functions
Mode Switch
Previous Play/Pause Next
VolumeDown Answer/HangUp VolumeUp
Long press three seconds for lampswitch
Short press for brightness switch
Power Switch
(long pr6ss for
three seconds)
USB Port
Chargingi Data Micro SD Card Slot
Button lcon
HI Long press: Mod€ Switch
Shon press: Play/Pause (>,, Calendai clock setting
+Clock time setting
Seting mode 0Alarm setting I
Volume Down/Previous
Clock time setting
Time seting mode oAlarm switch
-a- Long press: Light Switch
Short press: Bdghtness Swjtch A
Zal
Timer key
(1 0-1 20 minute segment tir
Long press cancelled timer
Charging
Please make sure the speaker is fully charged in first use. The
display will Flash and voice prompt sound, indicating that the
speaker needs to be recharged. Charge the speaker with the
provided USB cable which is compatible with any computer or cell
phone charger.
The battery icon will flash while charging, and the battery icon will
be steady when full charged.
Switch
Long press the power button " -3- " at the bottom for three seconds
to turn on the speaker and press for three seconds again to turn off.
The electronic watch and Bluetooth will be on meanwhile when
power is on.
(Notice: the alarm will sound and color light will on when the
alarm set even the power is off. Please turn off the speaker to
save the battery when no using for long time. )
Reset unction
Please use needle to pr€ss the "RESET" button at the bottom when
the light or speaker operates failed and the speaker or light will
restart.
LED Screen Function Description
Time Display
Song Length
Charglng lcon
Timing mode
Calendar and clock setting
Click the clock setting button" I "on the bottom to activate the
calendar and clock settings. The display will flash indicating the
current option being set in the order of: year, month, day, and time.
lneachcasepress" + "' - "toadjusttherightnumber. Press
" e" " to exit after setting each option.
timing)
l\4onth Date
I
tt
l" n1 tn
l'uE,u I
Year Time
Alarm Setting
Click the alarm setting button " @ " on the bottom to active the
alarm. The display will flicker to show which numbers are being
changed, cligk" * "" - " to adjust the clock number you want to
set, click " 0 " ,turn to the minule setting, then adjusithe minute
number you want ,click "P"again, then the alarm setttng is Jinished.
Step 3: Enter " 0000 " and click OK if there's a prompt that
requires you to enteia password.
Step 4: The phone or tablet will indicate when the pairing is
successful. The " BT " character on the display of the speaker
will stop flickering.
Music Playing
Open the player device when the connection is successful. Click to
play music, and the Bluetooth speaker will play the music.
Operating the playerwith the buttons on the Bluetooth speaker:
Short press >t to play/pause .long press for mode switch
Short press + to play the next song and long press to volume up.
Short press - to play the previous song and long press to volume
down.
Bluetooth Hands free Call
Answer and hang up the phone:
There will be an alerl sound from the speaker and color light will be
on when there is a phone call. Pat " -t1 " at the top to answer the
call, and pat " -& " again to hang up .
TF Card Mode
lnsert the TF card when the speaker is turned on. The speaker will
enter itself into the TF card mode. lt can play the music
(MP3/WMAJAPE format) from your TF card.
You can operate the player with the buttons on the Bluetooth
speaker:
short press" >{t ,,to play/pause . long press ,, Ht ,', switch to the
bluetooth mode.
Short press" * "to play the next song and long press to volume up.
Short press" - " to play the previous song and long press to volume
down.
(Note: ln TF mode, the screen display can only show the playing
time ofsongs but not the clock.)
Alarm Function
Press the alarm switch button " O "on the bottom to turn on the
alarm. The alarm. symbol on the lower left corner will light up
showing that the alarm is activated. Pressing the button once more
will deactivate the alarm. The alarm will ring and colorful wak6 up
light will be on at the same time when the alarm works, and thb
alarm volume enhances gradually from low level to hloh level. pat
the ' -t. " at the top will turn off the alarm and light.
Speaker Function:
Bluetooth Mode
First turn on the speaker at the bottom. The speaker will come into
Bluetooth mode automatically. The Bluetooth indicate character
" BT " will flash rapidly when in bluetooth detect mode for 10
minutes. During the period you should connect the bluetooth
speaker to your bluetooth enabled device.
Bluetooth connection
Step 1: Open the Bluetooth setting on your phone or tablet and
click "search device". lphones will search for Bluetooth devices
automatically.
Step 2: You have found the Bluetooth speaker when the screen
displays the character "Lightspoaker LO",click on it in your device to
pair the connection.
Bluetooth pairing and connection
1.lf the speak has been connected with Bluetooth devices before, it
will connect with the last Bluetooth device automatically once it is
turned on.
2.Other phones or tablets can not be connected with.the BlueJooth
speaker when the speaker is being connected with a phone or tablet.
3.The phone or tablet can not be connected with the Bluetooth
speaker if it is connected with other Bluetooth devices. You should
turn off your Bluetooth connection and connect your phone with the
Bluetooth speaker again.
Lamp Function
Long press the button " -t "at the top for three seconds to turn on
the lamp, and the lamp will on in the dimmest grade. The brlghtnsss
can be adjusted by clicking the lamp button' 't1 " . The brlghtness
has five grades: micro brightnoss, low brlghtness, lntsrmedlate
brightness, high brightness, and RGB color llght. Long press
the button" -ta " to turn on or off the lamp.
Timer Function
Short press "r? " button, music and light will be finished
in 1 O l2O 130I 4Ol 5Ol 60 l9OI 12O minutes.
long press"f "cancelled timer button.
Frequently Asked Questions
Precautions
l.Please store and use the product in room temperature environment.
2.Do not oxposo this product in rain or wet conditions.
3.Do not drop or bump this product.
4.Do not disassemble, repair, or modity the product.
5.Please use the power charge with rated voltage for the speaker.
6.lt may cause hearing damage if playing music in high volume for a
long time. Consider avoiding excessively high volume when playing
music for a long time.
T.Disassemble this product will invalidate the warranty.
Queetlon Solutions
Un!ucces!tul
palrlng and
connoctlon
1.Ch6ck tho speaker and make sure it is in the searching state
or roboot tho speaker.
2.Connectlon is difficult when there are loo many Bluetooth
d6vloo8 nearby. Turn offoth6. Bluotooth devices.
Turn otl lh6 Bluotooth device that was connect€d with the
Bluoloolh Bpeak6r last tlme, and reconnect the speaker .
Mutod or dlstortod
aou nd
l.Chgck lho volumo of your phone or lhe speaker, and adjusl
tho volumo.
2.Th€ balt€ry l8 low. Ple6Ba charge it.
Choppy music play
'1. Ch6ck if the device is b€yond lhe effectivo conn€ction
distance.
2. Check if there is any obstacle between the speaker and your
device,
Th€ lndlcator not 1.Tho batt6.y ls low. Please charge it.
2.Plga9e reboot th€ speaker.
mode
