Chinavision CVSN-E174 User manual

DVB.T MOBILE TV
User Manual

1
F:
F

2.3
2.4
2.5
2.6

1. Quick Installation
1.1 Setting Language
User can select a preferred language among various
languages at Installation page.
(1) Press <menu> button to enter Main Menu.
(2) Press <Left/Right> button to select SETUP option.
(3) Press <UplDown> button to select Installation option.
(4) Press <OK> button to enter Installation page.
(5) Press <Up/Down> button to select OSD Language
option.
(5) Press <Left/Right> button to select a language.
See Figure 1,2. If there is no database (scan result) in the
STB, it will start at step (5) when booting.
Figure 1. Main Menu, SETUP Figure 2. Installation Page
L.2 How to receive the programs?
Scan the possible frequency and bandwidth to receive the
programs.
(1) Press <menu> button to enter Main Menu.
(2) Press <Left/Right> button to select SETUP option.
(3) Press <Up/Down> button to select Installation
option.
Press <OK> button to enter Installation page.
Press <Up/Down> button to select Country Setting
option.
Press <Left/Right> button to set Country Setting.
Press <RED/GREEN> button to Auto Scan or Manual
Scan.
See Figure 1, 2. If there is no database in the STB, itwill
start at step (5) when booting.
1.2.1 Auto Scan
Auto Scan will erase the database first, and
scans default frequency and bandwidth by
Country Setting. Follow the steps (1) - (5) at section
1.2..7) Press <RED> button to be confirmed to clear the
database.
(8) Press <OK> button to confirm the database will be
cleared and start Auto Scan.
It costs time to do Auto Scan, user can press <exit> to exit
at anytime. See Figure 3, 4.
(4)
(s)
(6)
(7)
Figure 4. Auto Scan Page
Figure 3. Clear database message

L.2.2 Manual Scan
Manual Scan adds the scanning results into database, it
doesn't erase the database. But User has to know the
Frequency and Bandwidth for scanning. If user scans the
same Frequency and Bandwidth more then once, the programs
will be duplicated. Follow the steps (1) - (6) at section 1.2..
(7) Press <GREEN> button to enter Manual Scan page.
(8) Press <Up/Down> button to select Frequency option.
(9) Press <0-9> button to input the Frequency value.
( 10) Press <Up/Down> button to select Bandwidth option.
(11) Press <Left/Right> button to set Bandwidth value.
(.L2) Press <OK/exit> button to start scan or exit.
See Figure 5, 6.
2. STB Operation
Describe how to operate the STB.
2.1 Main Menu
Main Menu for operating a lot of functions.
(1) Press <menu> button to enter Main Menu.
(2) Press <info> button to display the version information of
STB.
See Figure 7, B.
2.2 SETUP
Set the system settings of STB. See Figure 9.
2.2.! Installation
Set about receiving and playing program settings of
See Figure 10. STB.
2.2.1.1 Antenna Setting
Set the antenna power on or off at Installation page.
(1) Press <UplDown> button to select Antenna Setting
option.(2) Press <Left/Right> button to set "ON,' or "OFF" for
turning on or off the antenna power.
2.2.1.2 Country Setting 7
Figure 7. Main Menu Figure 8. Version Info
Figure 5. Manual Scan Page Figure 6. Manual Scan Result
Figure 9. Main Menu, SETUP Figure 10. Installation Page

Set the country for Auto Scan, Manual Scan and Time
Zone. Change the Country Setting. will automatically change
the default Time Zone value. Country Setting also has default
Frequency and Bandwidth for Auto Scan.
(1) Press <UplDown> button to select Country Setting
option.(2) Press <Left/Right> button to set the Country.
2.2.L.3 OSD Language
Set the On Screen Display Language, please reference
section 1.1.
(1) Press <UplDown> button to select OSD Language
option.
(2) Press <Left/Right> button to set the language.
2.2.1.4 Audio Language
Set the audio language for watching program.
(1) Press <UplDown> button to select Audio
Language option.
(2) Press <Left/Right> button to set the language.
2.2.L.5 Subtitle Language
Set the language for displaying subtitle.
(f) Press <Up/Down> button to select Subtitle
Language option.
(2) Press <Left/Right> button to set the language.
2.2.L.6 Time Zone
Set the Time Zone for adjusting the system time. Some
Countries are covered with more than one Time Zone.
(1) Press <UplDown> button to select Time Zone
option.
(2) Press <Left/Right> button to set the Time Zone
value.
2.2.L.7 Auto Scan
Auto Scan erases the database first, and
scans default frequency and bandwidth by
Country Setting. Please check the section 1.2. and
1.2.1. for more detail.
(1) Press <RED> button to staft Auto Scan.
2,2.L.A Manual Scan
Manual Scan adds the scanning results into database, it
doesn't erase any database. But user has to know the
Frequency and Bandwidth for scanning. If user scans
the same
Frequency and Bandwidth more then once, the
programs will be duplicated. Please check the section 1.2.
and 1.2.2. for more detail.
(1) Press <GREEN> button to start Manual Scan.
2.2.2 TV Setup
Setup the display mode for ry. See Figure 11.
Figure 11. ry Setup page
2.2.2.1 TV Format
Set display format for watching program, such as 4:3LB,
4:3PS, 16:91B, 16:9FIT.
(1) Press <UplDown> button to select TV Format option.
(2) Press <Left/Right> button to set format.
9

2.2.2.2 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or
NTSC by program content. This setting should be matched with
user's TV.
(l) Press <Up/Down> button to select TV Mode option.
(2) Press <Left/Right> button to set mode.
2.2.2.3 OSD Transparency
Set the On Screen Display transparency. 1 is the most
diaphanous.
(1) Press <Up/Down> button to select OSD Transparency
option.
(2) Press <Left/Right> button to set transparent value.
2.2.2.4 Banner Display Time
Set Banner displays time. Banner doesn't disappear when
setting "Always". It displays at watching program. See Figure 12.
2.2.3 Password
To setup password for channel lock or censorship lock. User
can change password here. The default PIN Code is OOOO. See
Figure 14.
Figure 14. Password Page
2.2.3.1Channel Lock
Lock the channel (program) which has been set lock status by
password when turning on the Channel Lock. About setting
program lock status, please check the section 2.3.1.3. for more
detail. And lock many functions by password.
(1) Press <Up/Down> button to select Channel Lock option.
(2) Press <Left/Right> button to turn on or offthe lock setting.
2.2.3.2 Censorship Lock
Lock the program by password and censorship threshold. The
censorship info is in program content. Under the censorship rating,
user has to enter the password for watching program.
(1) Press <UplDown> button to select Censorship Lock
option.
(2) Press <Left/Right> button to set the rating.
2.2.3.3 Change Password
Change the PIN Code. If user forget the pIN Code, please
contact the provider.
(1) Press <UplDown> button to select Change password
option.
(2) Press <Left/Right> button to trigger changing password.
(3) Press <0-9> button to enter old password.
(4) Press <0-9> button to enter new password.
(5) Press <0-9> button to confirm new password.
If success, it will display pIN Code changed
message. Or it will display pIN Code Error
message. See Figure 15 - 19.

Figure 18. PIN Code Changed
2,2.4 Advance Timer
User can set event(s) for watching the program(s) by date,
time and frequency. When setting date and start time is up, STB
lvill automatically switch to program user sets. Setting here, the
start time and end time depend on current system time. please
check the section 2.3.2,1. for more detail. See Figure 20
Transfer code (application), database or both to pC or STB.
Transfer data by RS232 to pC, or from master STB to slave STB.
See Figure 21.
(1) Press <RED> button to set Target value.
(2) Press <GREEN> button to set Mode value.
(3) Press <OK> button to start transfer.
2.2.5.1 System Software Update
Update application and tsboofl by build-in card reader or USB
port. See Figure 27 * 24.
(1) Press <BLUE> button to enter file browser.
(2) Press <Left/Right/OK> button to change folder and
focus *.crd file.
(3) Press <OK> button to start update.
13
Figure 19. PIN Code Error
l2

Figure 21. Data Transfer Page
WM
Figure 23. Confirm to Staft Update Figurc 24. Updating
2.2.6 Set Default
Reset STB to factory default. All settings by user has been
operated will be reset default, and database will be erased at
same time. See Figure 25, 26.
2.3 TVIRADTO
There are two types of program. One is ry and the other is
ladio. The operation of the List and Guide at TV and Radio are
:he same. Here using TV to be example. See Figure 27,28.
2.3.L List
User can operate some functions in List. The result of
operating will be displayed. See Figure 29, 30.
(1) Press <Left/Right> button to select Tool (operation).
(2) Press <UplDown> button to select the program,
(3) Press <RED/GREEN/YELLOW/1-B> button to operate.
Buttons depend on operation.
15
Figure 27. Main Menu - TV Figure 28. Main N4enu - Radio
Figure 29. ry List
Figure 25. Set Default Fiqure 26. Saving
11

2.3.L.1Delete
Delete will delete the program perpetually from
database . User must rescan to recover it.
(1) Press <Left/Right> button to select Delete option.
(2) Press <UplDown> button to select the program.
(3) Press <RED/GREEN> button to set delete status.
(4) Press <YELLOW > button to confirm the operation
and save the result.
Program status is changed after operating. And press
<Left/Right> button will confirm and save. See Figure 31 -
34.
Figure 31. Delete - Select Figure 32. Delete - Select All
2.3.1.2 Skip
Skip will skip the program by channel upldown when
rvatching program.
(1) Press <Left/Right> button to select Skip option.
(2) Press <UplDown> button to select the program.
(3) Press <RED> button to set skip status.
(4) Press <YELLOW > button to confirm the operation
and save the result.
Program status is changed after operating. And press
<Left/Right> button will confirm and save. See Figure 35, 36.
2.3.1.3 Lock
Lock will confirm password before watching this
program when Channel Lock is turned on. please check the
section 2.2.3.L. for more detail.
(1) Press <Left/Right> button to select Lock option.
(2) Press <UplDown> button to select the program.
(3) Press <RED> button to set lock status.
(4) Press <YELLOW > button to confirm the operation
and save the result. Program status is changed after
operating. And press <Left/Right> button will confirm and
save. See Figure 37, 38.
Figure 35. Skip Figure 36. Skip - Select
Figure 33. Delete - Save
l6
Fiqure 34, Delete -Saving