Chordette PEACH User manual

Thank you for purchasing the Chordette Peach Bluetooth
Decoder with USB, Coax and optical input DAC. In
order to get the most from your product please take a
few moments to read these instructions.
Connections
Balance Control
Audio Outputs
There is one pair of Left & Right unbalanced outputs via RCA phono style connectors.
The right output is indicated by a red band and the left a white band. The outputs are
at 2V line level.
Chordette PEACH
Instruction Manual
High Definition Bluetooth Decoder and DAC
12V DC power input
Coax digital input
Input Selector
Control input for connection
to Prime preamplifier
Bluetooth antenna connection
(screw supplied antenna in place
before use)
USB Input
Optical digital input
Right Output
Left Output

Input Selection
The Chordette Peach enables you to receive and decode Bluetooth
Apt-X or A2DP audio, USB streaming audio, coax or optical digital
audio. These inputs can be selected using the rotary switch on the rear
panel of the unit or remotely via the control cable and Prime preamplifier.
The internal illumination will change accordingly.
Function Position
USB - rotated fully anticlockwise (orange light)
Bluetooth - 2 (blue light)
Coax - 3 (red light)
Optical - 4 (green light)
Prime preamplifier - 5 (no light)
control
Using USB digital audio
Connect your personal computer via an A to B type USB cable. The
Peach will automatically be recognised by the operating system as a
USB DAC. All audio from the computer will now be streamed via the
Peach. (If there is no audio you may need to manually select the USB
connection in the sound settings on the computer).
Using Bluetooth wireless digital audio
Referring to your Bluetooth device instructions, search for new paired
devices. The Peach will be identified as Peach then a number. Select
your Peach and enter the passcode 0000 when prompted. Confirm
that you wish to connect to the Peach device.
The Peach should now be locked to your Bluetooth enabled phone or
computer and be able to receive high quality digital audio. Higher
quality Apt-X transmissions are automatically detected if received.
If you lose connection, for instance if the Peach is switched off, then
you can reconnect by looking at the list of paired devices on the phone
and selecting connect.
Using Coax or Optical digital inputs
Digital source components such as CD players can be connected to
the BNC coax input or optical digital input. Select the correct input
using the rotary switch ( or via the Prime remote control ).
Made in England by Chord Electronics Ltd
www.chordelectronics.co.uk
Now with Apt-X advanced Audio Codec Installed
The Bluetooth name and logos are registered trademarks and are owned by the Bluetooth SIG Inc.