Christopher Ward C8 Birkin's Blower TMB User guide

C8 Birkin’s Blower TMB
Limited Edition
Owner’s handbook

1
Time on your side...
Introduction
Contents
Birkin’s Blower 2–3
TMB Art Metal 4–5
C8 Birkin’s Blower TMB Limited Edition 6–7
Technical information 8–9
How to operate your C8 Birkin’s Blower
TMB Limited Edition 10–14
Our watch care programme 15
Keeping in touch 16
Your Christopher Ward watch has been designed
and engineered by experts to ensure not only precise
timekeeping, but also to give you a sense of pride
whenever you wear it.
You’ve made an investment, a good one, and the
aim of this handbook is to help you make the most of
it during what I hope will be a lifetime of ownership.
Christopher Ward

2
C8 Birkin’s Blower TMB Limited Edition
Birkin’s Blower
From one glimpse of its red bodywork, the mechanical
beauty of the Bentley Blower No.1 is obvious. Yet there
is more to this beauty than meets the eye: under the
ownership of one Sir Henry “Tim” Birkin, Blower No.1
became a record-breaking legend.
Its story is an extravagant one. Developed by Birkin,
a member of the ‘Bentley Boys’ gentlemen’s driving
club, with the intention of winning Le Mans, the
Blower was unveiled at the British International Motor
Show in 1929. Fifty supercharged Blowers were created
– the minimum number required to enter the famous
24-hour endurance race. The rst prototype, No.1,
was used for track purposes; Birkin subsequently set
a then-world record speed of 137.96mph driving
No.1 at Brooklands in 1931.
A daredevil to some, a certied lunatic to others,
Birkin pushed himself and the machine he was
driving to the limit. Look no further than the story
behind the Blower No.1’s nickname, ‘The Brooklands
Battleship’; derived from when its exhaust set the
car’s fabric body alight, Birkin expunged the re mid-
race – and then carried on driving! It’s this moniker
that is namechecked on the C8’s backplate, with the
Brooklands iconic banked track where it set a world
record also engraved into a piece of piston sourced
from Blower No.1.
But Birkin’s Blower wasn’t quite done making history
yet. Purchased by revered British watchmaker and
car collector George Daniels after Birkin’s death,
No.1 would remain in Daniels’ collection until his
passing in 2012, where it was sold at auction at
the Goodwood Festival of Speed. Its selling price?
£5,042,000 – breaking the record for the most
expensive British-built car ever sold.

33

4
C8 Birkin’s Blower TMB Limited Edition
TMB Art Metal
The latest collaboration between Christopher
Ward and TMB Art Metal, the C8 Birkin’s Blower
TMB Limited Edition focuses on the record-
breaking exploits of the Bentley Blower No.1,
as well as the legend of the man who drove it,
Sir Henry “Tim” Birkin.
Visible through museum-grade sapphire on the C8’s
reverse, a piece of piston metal has been engraved with
its chassis number, UU5871, alongside an image of Birkin
commandeering No.1 around Brooklands’ iconic banked
track – the location where the Blower set its 137.96 mph
land speed world record, an astonishing feat in 1931.
Blower No.1 was purchased from the Birkin estate in the
1970s by George Daniels – one of the most important
British watchmakers to have lived. Creator of the
co-axial escapement, an IP later purchased by Omega,
his hand-made watches each took more than 2,500
hours to complete; yet it was Daniels’ private car
collection that drew the attention of Christopher
Bennett at TMB Art Metal.
As the founder of a company dedicated to sourcing
materials of historical provenance, Christopher
personally met Daniels when tracing the piston
that would later end up in the C8 – although this
was before his involvement with CW and the wider
horological world, so Christopher readily admits his
unawareness of Daniels’ world-class talents!
With 90 watches built to commemorate 90 years
since Blower No.1 set its world record speed – one
that would stand for another two years – Bennett’s
successful eorts obtaining its piston mean you
are carrying a piece of British motorsport history,
wherever you go.

5
Piston metal from Birkin’s Blower No.1.
Sourced by the specialists at TMB Art Metal,
the piston was melted down and formed into
discs. The metal discs were then laser engraved
and lacquer filled with an illustration of Birkin
commandeering No.1 around Brooklands’ iconic
banked track and takes pride of place through
the C8’s exhibition caseback.
5

6
C8 Birkin’s Blower TMB Limited Edition
C8 Birkin’s Blower TMB Limited Edition
With the story of Birkin and his Blower No.1
already well documented in these pages, let’s
focus on the attention to detail throughout
the C8 that makes it a faithful representation
of the history and character of its subjects.
Dispensing with CW’s trademark location of numerals
at 12 and 6, the C8’s design echoes the Smiths
speedometer found inside the Blower No.1 – its
minute and pointed second hand are the same, while
the dial’s greyed area represents the car’s point of
optimum power. An outer minute track based upon
its rev counter is also included, along with an inner
track for how fast the car should be going (this was
before technology took half of the fun away).
True to the horology available when Birkin was
breaking world records, a hand-wound mechanical
movement keeps time inside the C8. The similarities
end from there, however, with the technical capability
of our Calibre SH21 in-house movement rooted rmly
in the modern era: SH21’s two barrels can store up to
120 hours of chronometer-certied timekeeping
when fully wound, while their series connection ensures
all-important precision even when their power reserve
is running low.
But the real gravitas of the C8 is drawn from its
backplate. One of Blower No.1’s pistons has been
melted down and cut into discs, and then laser
engraved and lacquer lled with an image of Birkin’s
world record-breaking run at Brooklands. With just 90
of these watches built to mark the 90th anniversary
of this milestone in British motorsport, the C8 Birkin’s
Blower TMB Limited Edition also serves as a tting
tribute to one of the greatest English cars ever built.

7

8
C8 Birkin’s Blower TMB Limited Edition
Features
–Swiss made
–Special limited edition of 90 pieces
–Disc of Bentley Blower No.1 precious metal with
‘Brooklands Battles’ engraving embedded into
exhibition backplate
–27 jewel in-house Calibre SH21 hand-wound
Chronometer
–5 day (120 hour) power reserve
–Marine-grade, sandblasted black DLC steel case
–Museum grade anti-reflective sapphire crystal
–Original Blower No.1 instrument panel inspired
dial with applied screw detailing
–Blower No.1 speedometer-influenced hands and
marking coated with SLN TC-1 SuperLumiNova®
–Crown stamped with Blower ‘No.1’ graphic
–Camel vintage oak leather strap with black DLC
sandblasted clasp
Technical information –Additional premium quality canvas webbing strap
with black DLC sandblasted clasp included
–Unique engraved individual serial number
–Deluxe presentation case with signed Certificate
of Provenance
Technical
Diameter: 44mm
Height: 11.7mm
Weight: 81g
Calibre: SH21 hand-wound
Chronometer
Case: 316L stainless steel
Water Resistance: 5 ATM (50 metres)
Vibrations: , per hour (Hz)
Timing tolerance: –/ secs per day
Lug to lug: 53.2mm
Strap: 22mm

9

10
How to operate your C8 Birkin’s Blower TMB Limited Edition
Setting the time/date
126
144
12
1. Manual winding
2. Time setting

11
How to operate your C8 Birkin’s Blower TMB Limited Edition
The crown should sit ush to the case (position 1 )
in order to maintain water resistance. To re-power
the watch after a period of non-use, simply wind the
crown in a clockwise direction.
• For setting the time pull gently into position
2
and turn clockwise to advance the time.
For precise time setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
• Push the crown back to position
1 .
PLEASE NOTE: Take care not to overwind the
crown past the point of resistance as it will
damage the movement.

12
How to operate your C8 Birkin’s Blower TMB Limited Edition
Using the quick-release pins on your strap
1. Locate the quick-release pin on your strap.
Pull the pin to the side to detach your strap.
2. To reattach your strap, align the pins to the
lug holes and click the strap into position.
Repeat for the other side.

1313

14
Water resistance
Although your watch has been through vigorous
static pressure testing, it is worth remembering that
there are many variables that can aect the water
resistance of your watch.
For instance, arm movements during swimming
and the sudden impact of diving and water sports
will drastically increase the pressure the watch is
under. Wearing your watch in the bath, shower, or
sauna can also have an eect as a rapid increase
in temperature can cause seals to expand and in
extreme cases, malfunction or create condensation.
For these reasons, the water resistance rating of your
watch (as shown) should only ever be considered
a guideline and we strongly recommend they are
always adhered to.
How to operate your C8 Birkin’s Blower TMB Limited Edition
1 ATM (10 metres)
Safe to wear your watch while
washing your hands with tap water.
3 ATM (30 metres)
Washing your car and/or
general hose pipe usage.
5 ATM (50 metres)
Water resistant to most
household shower units.
15 ATM (150 metres)
Safe to use while snorkelling
in open water.
30 ATM (300 metres)
Ideal for experienced divers and
those practising scuba-diving.
60 ATM (600 metres)
Professional divers, experiencing
prolonged exposure underwater.
100 ATM (1000 metres)
Professional deep sea diving.

15
Our watch care programme
Our watch care programme
Visit our website for more details about
our 60|60 Guarantee and Service and
Repair Programme.
Your watch is constructed from the finest
components and materials available including one
of Switzerland’s finest mechanical movements.
As with all watches of this quality, with the right
care and attention, your new Christopher Ward
watch has the potential to become an heirloom
piece giving further joy to future generations.
It’s for this reason we have created our industry
leading approach to after-sales care, starting
with our famous 60|60 Guarantee which remains
the most comprehensive guarantee in the world
of watchmaking.
60|60 Guarantee
1. 60 Day free returns
Our success depends on you being completely happy with your new
Christopher Ward watch. You have up to 60 days to return your watch,
absolutely free of charge, and receive a replacement or full refund by return –
so long as it has not been worn and is returned in perfect condition.
2. 60 Month movement guarantee
Your watch, at its heart, has a top quality precision engineered Swiss
movement – so it’s very unlikely to give you problems with the minimum
amount of care and attention, including a regular service. We recommend
you return your watch to us every 3/4 years for a service, so our expert
technicians can keep your ne timepiece in peak condition.
Servicing and repairs…the Christopher Ward way…
Our innovative approach to servicing and repairing your Christopher Ward
watch means that having your watch serviced or repaired doesn’t mean
months of waiting followed by an exorbitant bill – which is more or less
the experience guaranteed by every other luxury watch brand. We have
developed an easy, quick and aordable expert service and repairs
programme that doesn’t cost the earth and has your watch back where it
belongs – on your wrist – in double-quick time.

16
From small beginnings just a few short years ago
(our rst workshop was actually a refurbished
chicken shed!), Christopher Ward has won a worldwide
following for his eponymous watch brand and can
justiably claim to manufacture the most aordable
luxury watches in the world.
For many, the philosophy behind the brand, of trying
to put luxury watches within the reach of everyone,
is as attractive as the watches themselves, as
is the very open approach of the business which
means that Chris and the team spend a lot of time
communicating personally with our customers –
many of whom have become friends.
As the owner of a Christopher Ward watch,
if ever you need to get hold of us we are at
your service. We have listed some useful
contact details on the back cover.
There is also always something new going on at
our website at www.christopherward.co.uk
and, if you haven’t already discovered the
independent forum dedicated to our brand at
www.christopherwardforum.com we would
recommend a visit. Informative and fun,
it’s a great place to hear the unexpurgated
view of Christopher Ward.
Keeping in touch
Keeping in touch with Christopher Ward

Head Office
1 Park Street, Maidenhead,
Berkshire SL6 1SL
United Kingdom
Customer Services
UK: [phone]
USA: 1.877.226.8224
[email protected]
[email protected]
christopherward.co.uk