Christopher Ward C60 Chronograph User guide

C60 Chronograph
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
1

2222

3
C60 Chronograph
There’s something irresistible about the mechanical chronograph.
Especially one as impressive as the C60 Chronograph.
Whether you’re a seasoned watch lover or someone who’s dipping their
toe in the horology pool, the C60 Chronograph oers a lot.
As part of the Trident family of pro diving instruments, it inherits an
array of the range’s upgraded features (just check those arrowed
hands), while its stopwatch functions come courtesy of the Swiss-
made Sellita SW510 BH a movement. And on the style front, it’s no
slouch either.
While Grade X1 GL C1 Super-LumiNova®and screw-down crown
and pushers are essential to a chronograph dive watch, the
polished ceramic bezel and glossy black dial deliver a dressier edge.
So whether you’re timing your dive or just biding your time, the
C60 Chronograph will be the perfect – and perfectly equipped –
companion. 3

4
Features
• Swiss made
• 27 jewel self-winding mechanical
chronograph
• 48-hour power reserve
• Hour, minute, small second and date
calendar with central second and 30
minute indicators
• Hacking seconds
• Anti-shock system
• Twin-ag engraving over ‘Colimaçoné’
nish on the rotor
• Brushed and polished marine-grade
stainless steel case
• Embossed screw-down crown and
screw-down pushers
• Screw-down caseback
• Unique engraved serial number
• Unidirectional zirconia (ZrO²) ceramic
bezel
• Anti-reective sapphire crystal
• Polished lacquer dial
• Super-LumiNova®Grade X1 GL C1 hands
and indexes
• Top-brushed indexes with polished sides
• Eco-friendly luxury presentation case and
owner’s handbook
4

5
Technical Information
Calibre Sellita SW510 BH a
Case 316L stainless steel
Diameter 42mm
Height 17.2mm
Weight 115g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour (4 Hz)
Timing tolerance -20/+20 seconds per month
Lug to lug 51.5mm
Strap width 22mm
5

6
12 3 4
How to operate your C60 Chronograph
PLEASE NOTE: Date correction should not be carried out
between 20.00 hr and 02.00 hr as the watch gearing will
already be aligning itself to change the date. The crown
should always be pushed in after adjustment, and it is
best to do so from position 3to avoid advancing beyond
the desired date.
6
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1 ) in order to
maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Chronograph has a maximum power reserve
of 48 hours when fully wound.
• Pull gently into position 3. For rapid date correction, turn in an
anti-clockwise direction.
• Pull gently into position 4for handsetting and stopping of the
seconds hand. For precise time setting it is recommended to pass
beyond the desired minute and to set the hand backwards.
Setting the time and date
1. Crown screw-down position
2. Unscrewed position/manual winding
3.Date setting
4.Time setting

7
How to operate your C60 Chronograph
PUSH-BUTTON A
PLEASE NOTE: Before starting the
chronograph, reset the chronograph
hands to their original position. See the
reset section to set the counters to zero.
7
START
First unscrew the pushers anti-
clockwise from the case into
position 2for starting, stopping,
restarting and resetting the
timing mode.
Press push-button A to start
timing.
Using the chronograph
1
START
START
STOP
1
2
STOP
To stop the timing, press push-
button A once more and read
the 2 chronograph counters,
for example: 3 mins / 34
seconds.

8
How to operate your C60 Chronograph
8START STOP
STOP
RESTART
RESET
1 4
2
3
5
PUSH-BUTTON B
PLEASE NOTE: Do not operate the
chronograph pushers under water
in order to prevent water entering
the mechanism. Ensure pushers are
screwed ush to case.
RESET
To reset the timing, press push-
button B (The two chronograph
hands will be reset to their zero
positions).
RESTART/STOP
To restart the timing, press push-
button A again (timing
is resumed).
To stop timing press push-button
Aand read the two chronograph
counters: 10 mins / 34 seconds.

99
How to operate your C60 Chronograph
Diving with your watch
Bezel marker
No decompression limit
Start of dive
If using the bezel for a dive and let’s say the recognised
maximum “no-stop time” is 55 minutes, then in this example
(shown right) the time at the surface immediately before
the dive is 10.08am. However the bezel marker is at the
12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with
the 8 minute position.
• You can now read that the 55 minute no decompression
limit will occur at 3 minutes past the next hour.
PLEASE NOTE: It is always useful and best
practice to make a note on a dive slate
before entering the water and to carry a set
of dive tables should the dive plan change
during the course of a dive. A safety stop for
3 to 5 minutes at 15ft is recommended at
the end of all dives.
A safety stop for 3 minutes at 15ft is required
any time you come within 3 pressure groups
of a no decompression limit, and for any dive
to a depth of 100ft or deeper.