CiERA EZ Fold All-In-One User manual

CiERA EZ Fold All-In-One™
Thank you for purchasing the EZ Fold All-In-One™ TV Stand. This TV stand is designed to accommodate flat panel TVs from to
28" to 70" diagonal weighing up to 90 Lbs.
Page 1 of 2
Step 2
Place Center Plate and Shelf
Bracket(C) on top of Truss(B) with
shelf brackets facing toward front.
Step 3
Unfold Truss (E) and line
up screws on truss (B).
Twist Truss columns clock-
wise just above screws to
screw Truss into Truss(B).
Twist each column
approximately 3 times
around and repeat for
each screw until complete.
Step 1
Unfold Truss (B) and line
up screws on truss (B) with
holes on Base (A).
Twist Truss column clock-
wise just above screws to
screw Truss onto Base (A).
Twist each column
approximately 3 times
around and repeat for
each screw until complete.
E
Place top Component Shelf (E)
on top of Truss(E) screws. Twist
Top of Truss columns clock-wise
just below screws to Secure
Component Shelf (F). Twist
each column approximately 3
times around and repeat for
each screw until complete.
Attach center shelf with
provided thumb screws.
F
E
Step 4
Attach Center Shelf (D) to
Shelf Bracket (C) with
provided thumb screws .
Name Part Qt
y.
Base A 1
Bottom Truss B 1
Center Plate and
Shelf Bracket
C 1
Center Shelf and
Screws
D 1
Top Truss E 1
Top Component Shelf F 1
Mounting Rails G 2
Hanger Brackets H 2
O-Rings I 8
Allen Wrench J1 & J2 J 2
Interface Screws K 12
Step 5
A
B
C
D
E
F
G
H I J1 J2
K
F
E

VESA Interface 100x100 to 400x400 Installation
Page 2 of 2
Place Mounting Rails (G)
onto rail holding brackets
of top Truss Section (E).
Turn knob on rail holder
and slide lock down into
place and tighten (as shown
below)
Place O-Rings (I)
on to Mounting
Rails (G)
Attach Hanger Brackets (H) on to back of the TV
using provided Interface Screws (K) using the
holes furthest from the hook.
Note: Multiple size screws are provided that fit
the majority TV’s. Only 4 screws are required for
mounting.
Attaching Hanger Brackets to TV
Placing TV on Mounting Rails
NOTE: We recommend that 2 people do this step
depending on the size and weight of your TV.
Remove screw and lower Flag Lock into down
position.
Center TV on Truss and lift and hook Hanger
Brackets (H) on to Mounting Rails (G).
Lift Flag Lock into place insert and tighten locking
screw.
Place last the 4 O-Rings on to Mounting Rails just
outside Hanger Brackets (H) as shown in image 2
Image 2