
EN
7
3. Angle the tablet by turning the knob
(diagram 1, pos. B) so that the hinge turns
easily. Adjust the holder to the required
position and lock the knob. The unit can
also be angled in one direction by using
the hinge (diagram 1, pos. C).
Read the operating instructions
carefully before use.
Save them for future reference.
WARNING: The product must
not be positioned in such as
way as to obscure the view of
the driver, or otherwise have a
negative eect on trac safety.
1. Put the holder in the four-point adapter
xture and push both parts together
(diagram 1, pos. A).
2. Clean the surface where the suction cup
xture is to be mounted.
3. Place the suction cup xture on a smooth
surface where the product will not
obscure the view of the driver. Press gently
(diagram 2, pos. A) and fold down the
locking arm (diagram 2, pos. B).
1. Check that the suction cup xture is rmly
attached to the surface.
2. Lift up the quick-release lock (diagram 3,
pos. A) and put the tablet inside the four
support lugs. Adjust the distance between
the support lugs so that the unit is rmly
in place and fold down the quick-release
lock.
MOUNTING
USE
SAFETY INSTRUCTIONS