CKO PV-YW-500 User manual

Version 1: June 2015
PV-YW-500
Installation
Manual

Version 1: June 2015
Specifications
Dash mount / roof mount monitor, sunshade included
5" TFT LCD panel
TV system: Auto switching
2 video inputs
Triggers video on one channel
Power: 12V DC
Resolution: 800 x 480
Aspect ratio: 16:9
Contrast ratio: 350:1
RCA video connection
Dimensions: 131 x 95 x 16 mm

Version 1: June 2015
Installation
Use the provided power lead, connect the red to ACC
12V and the black to a suitable ground. This lead can
then be connected to the red DC power plug on the
monitor.
Run a video lead from the camera and connect it to
the yellow video plug on the monitor labelled ‘cam in’.
Connect the blue wire to the reverse light, this will
trigger the monitor on and go to the ‘cam in’input
when it sees 12V.
There is an additional video in on the spare RCA, the
monitor doesn’t trigger to this input.
On the back of the screen there is 5 buttons see
diagram on page before for further information.
Pressing the menu button allows you to access basic
settings; brightness, contrast, and colour.
Clean the area where the monitor is to be mounted
and use the 3M pad provided to stick the monitor
down.

Version 1: June 2015