3
GENERAL SAFETY PRECAUTIONS
WORK ENVIRONMENT
1. ALWAYS keep the work area clean and tidy.
2. ALWAYS keep children and visitors away from the work area.
3. Although the lamp may be used outdoors, DO NOT leave it exposed to
the elements. Avoid direct sunlight, direct heat, rain/moisture etc.
4. ALWAYS keep body and clothing dry. Never work in damp area without
adequate insulation against electric shock.
GENERAL USE
1. ALWAYS check for damage before using the lamp. Inspect the power
cable and plug for damage and make sure that no connections are
loose. Any damage should be properly repaired or the part replaced.
Consult your CLARKE dealer.
2. NEVER modify the plug in any way. Do not use adaptor plugs with earthed
(grounded) power tools. Correct plugs and outlets will reduce the risk of
electric shock.
3. ALWAYS disconnect from the mains supply before moving or performing
any maintenance.
4. NEVER move your lamp or replace fluorescent tubes or broken parts with
wet hands or when standing on a wet or damp surface or in water.
Always ensure the power supply is disconnected at the mains.
5. ALWAYS use an outdoor weatherproof socket when using the lamp
outdoors.
6. NEVER abuse the mains cable or yank the cable to disconnect it from the
socket. Keep the cable away from sharp edges/hot surfaces.
7. NEVER cover the lamp.
8. ALWAYS disconnect from the power supply when not in use.
9NEVER immerse the lamp in water.
10. ALWAYS store this product in a dry, secure place out of reach of children.
11. NEVER carry out any alterations or modifications to this product.
12. NEVER use this product if it is defective/operating abnormally.
Please keep these instructions in a safe place for future reference.
